SIST ETS 300 825:2000

• Abstract:

  To include 3volt technology by amendment to ETS 300 331

• Status: Published
• Publication Date: 30-Jun-2000
• ICS: 33.070.30 - Digital Enhanced Cordless Telecommunications (DECT)
• Technical Committee: RES - Radio equipment and systems
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jul-2000
• Due Date: 01-Jul-2000
• Completion Date: 01-Jul-2000
• Ref Project: ETSI ETS 300 825 ed.1 (1997-10) - Digital Enhanced Cordless Telecommunications (DECT); 3 Volt DECT Authentication Module (DAM)

Overview

SIST ETS 300 825:2000 is a Slovenian standard harmonized with the European standard ETS 300 825, developed by the European Telecommunications Standards Institute (ETSI). Titled Digital Enhanced Cordless Telecommunications (DECT); 3 Volt DECT Authentication Module (DAM), this standard specifies the requirements for implementing a 3 Volt (3 V) Authentication Module interface in DECT systems, particularly for Portable Equipment (PE). It was created to amend and update referencing to the original ETS 300 331 to encompass modern 3 V technology, aligning DECT authentication modules with advances in portable and low-power electronics.

Key Topics

• 3 Volt DECT Authentication Module (DAM):

  • Defines DAMs that can operate at both 3 V and 5 V, enhancing compatibility and supporting lower power consumption.
  • Specifies how DAMs should indicate compatibility - identification is coded in the status information, enabling automatic detection by the portable equipment.

• DAM-PE Interface Requirements:

  • Outlines the electrical and logical interface requirements for 3 V DAMs in conjunction with portable devices.
  • Describes activation, deactivation, and voltage switching procedures to ensure secure and reliable authentication module operation.

• Cross Compatibility:

  • Addresses the ability of equipment supporting both 3 V and 5 V DAMs to ensure seamless interoperability within mixed-technology environments.
  • Ensures backward compatibility with existing 5 V DAM implementations and forward compatibility with new efficient solutions.

• Reference to Related Standards:

  • Leverages and refers to ETS 300 331 for core DAM-PE interface specifications not modified by the 3 V adaptation.
  • Incorporates concepts from ETS 300 641 for subscriber identity modules (SIM) in mobile environments, ensuring a consistent approach across telecommunications technologies.

Applications

SIST ETS 300 825:2000 delivers practical value within digital communications infrastructure by modernizing security and authentication modules for DECT. Key application areas include:

• Cordless Phones and Private Branch Exchanges (PBXs):

  • Provides the framework for secure authentication in home and enterprise DECT cordless telephony systems.

• Low-Power Portable Devices:

  • Enables manufacturers to design portable DECT-enabled equipment (such as handsets) with reduced power requirements, extending battery life and reducing heat dissipation.

• Interoperability in Mixed Networks:

  • Assures that new products using 3 V DAMs remain compatible with legacy 5 V modules, supporting a gradual migration within operational networks.

• Enhanced Security:

  • Maintains robust authentication processes between handsets and base stations, necessary for protecting user data and preventing unauthorized access.

Related Standards

Professionals referencing SIST ETS 300 825:2000 should also consider the following related standards for a comprehensive implementation:

• ETS 300 331 - Digital European Cordless Telecommunications (DECT); DECT Authentication Module (DAM)
• ETS 300 641 - Digital cellular telecommunications system (Phase 2); Specification of the 3 Volt Subscriber Identity Module - Mobile Equipment (SIM-ME) interface (GSM 11.12)
• SIST ETS 300 331 - Slovenian adaptation of the core DAM standard for DECT
• GSM 11.11 (ETS 300 608) - Relevant for understanding subscriber identity module interfaces in mobile contexts

These standards collectively facilitate seamless integration, maximum device interoperability, and adherence to robust security protocols in the deployment of DECT wireless telecommunications solutions.

---

Keywords: DECT authentication module, 3 Volt DAM, cordless telecommunications, portable equipment, DAM-PE interface, DECT standard, cross compatibility, ETS 300 331, ETS 300 641, authentication security.

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital Enhanced Cordless Telecommunications (DECT); 3 Volt DECT Authentication Module (DAM)33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:ETS 300 825 E13SIST ETS 300 825:2000en01-PDM-20003SIST ETS 300 825:2000SLOVENSKI
STANDARD
EUROPEANETS 300 825TELECOMMUNICATIONOctober 1997STANDARDSource: DECTReference: DE/DECT-060100ICS:33.020Key words:Card, DAM, DECT, GSMDigital Enhanced Cordless Telecommunications (DECT);3 Volt DECT Authentication Module (DAM)ETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: [e-mail].: [phone] - Fax: [phone]Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1997. All rights reserved.SIST ETS 300 825:2000

Page 2ETS 300 825: October 1997Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Committee Support Dept." at the address shown on the title page.SIST ETS 300 825:2000

Page 3ETS 300 825: October 1997ContentsForeword.51Scope.72Normative references.73Definitions, abbreviations and symbols.73.1Definitions.73.2Abbreviations.73.3Symbols.843 V technology.84.13 V technology DAM.84.23 V technology impact.84.33 V technology DAM identification.84.43 V technology PE.84.53 V Only PE.84.6Activation and deactivation.94.7Supply voltage switching.94.8Cross compatibility.94.9Outlook.95Electrical specifications of the DAM-PE interface.9Annex A (informative):Cross compatibility aspects.10History.11SIST ETS 300 825:2000

Page 4ETS 300 825: October 1997Blank pageSIST ETS 300 825:2000

Page 5ETS 300 825: October 1997ForewordThis European Telecommunication Standard (ETS) has been produced by the Digital Enhanced CordlessTelecommunications (DECT) Project of the European Telecommunications Standards Institute (ETSI).This ETS defines the aspects of the DECT Authentication Module - Portable Equipment (DAM-PE)interface which is based on 3 Volt (3 V) technology to be used in the Portable Part (PP) within the DECTsystem.Transposition datesDate of adoption:3 October 1997Date of latest announcement of this ETS (doa):31 January 1998Date of latest publication of new National Standardor endorsement of this ETS (dop/e):31 July 1998Date of withdrawal of any conflicting National Standard (dow):31 July 1998SIST ETS 300 825:2000

Page 6ETS 300 825: October 1997Blank pageSIST ETS 300 825:2000

Page 7ETS 300 825: October 19971ScopeThis European Telecommunication Standard (ETS) defines the asp
...

SLOVENSKI STANDARD
01-julij-2000
'LJLWDOQHL]EROMãDQHEUH]YUYLþQHWHOHNRPXQLNDFLMH'(&70RGXO'(&7]D
RYHUMDQMHGHOXMRþQDYROWLK'$0
Digital Enhanced Cordless Telecommunications (DECT); 3 Volt DECT Authentication
Module (DAM)
Ta slovenski standard je istoveten z: ETS 300 825 Edition 1
ICS:
33.070.30 'LJLWDOQHL]EROMãDQH Digital Enhanced Cordless
EUH]YUYLþQHWHOHNRPXQLNDFLMH Telecommunications (DECT)
'(&7
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN ETS 300 825
TELECOMMUNICATION October 1997
STANDARD
Source: DECT Reference: DE/DECT-060100
ICS: 33.020
Key words: Card, DAM, DECT, GSM
Digital Enhanced Cordless Telecommunications (DECT);
3 Volt DECT Authentication Module (DAM)
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: [e-mail]
Tel.: [phone] - Fax: [phone]
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1997. All rights reserved.

Page 2
ETS 300 825: October 1997
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

Page 3
ETS 300 825: October 1997
Contents
Foreword .5
1 Scope .7
2 Normative references.7
3 Definitions, abbreviations and symbols.7
3.1 Definitions .7
3.2 Abbreviations .7
3.3 Symbols .8
4 3 V technology.8
4.1 3 V technology DAM .8
4.2 3 V technology impact.8
4.3 3 V technology DAM identification .8
4.4 3 V technology PE.8
4.5 3 V Only PE.8
4.6 Activation and deactivation .9
4.7 Supply voltage switching.9
4.8 Cross compatibility.9
4.9 Outlook.9
5 Electrical specifications of the DAM-PE interface .9
Annex A (informative): Cross compatibility aspects.10
History.11

Page 4
ETS 300 825: October 1997
Blank page
Page 5
ETS 300 825: October 1997
Foreword
This European Telecommunication Standard (ETS) has been produced by the Digital Enhanced Cordless
Telecommunications (DECT) Project of the European Telecommunications Standards Institute (ETSI).
This ETS defines the aspects of the DECT Authentication Module - Portable Equipment (DAM-PE)
interface which is based on 3 Volt (3 V) technology to be used in the Portable Part (PP) within the DECT
system.
Transposition dates
Date of adoption: 3 October 1997
Date of latest announcement of this ETS (doa): 31 January 1998
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 31 July 1998
Date of withdrawal of any conflicting National Standard (dow): 31 July 1998

Page 6
ETS 300 825: October 1997
Blank page
-----------
...