SIST EN 300 286-6 V1.3.3:2005

Integrated Services Digital Network (ISDN); User-to-User Signalling (UUS) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network

To handle comments and incorporate appropriate corrections into the ATS of DSS1 L2

Digitalno omrežje z integriranimi storitvami (ISDN) – Dopolnilna storitev: meduporabniška signalizacija (UUS) – Protokol digitalne naročniške signalizacije št. 1 (DSS1) – 6. del: Abstraktni preskušalni niz (ATS) in dodatna informacija za preskušanje delne izvedbe protokola (PIXIT) – Proforma specifikacija za omrežje

General Information

• Status: Published
• Publication Date: 31-Mar-2005
• ICS: 33.080 - Integrated Services Digital Network (ISDN)
• Technical Committee: SPN - Services and Protocols for Networks
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Apr-2005
• Due Date: 01-Apr-2005
• Completion Date: 01-Apr-2005
• Ref Project: ETSI EN 300 286-6 V1.3.3 (2000-05) - Integrated Services Digital Network (ISDN); User-to-User Signalling (UUS) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 300 286-6 V1.3.3:2005
01-april-2005
'LJLWDOQRRPUHåMH]LQWHJULUDQLPLVWRULWYDPL,6'1±'RSROQLOQDVWRULWHY
PHGXSRUDEQLãNDVLJQDOL]DFLMD886±3URWRNROGLJLWDOQHQDURþQLãNHVLJQDOL]DFLMH
ãW'66±GHO$EVWUDNWQLSUHVNXãDOQLQL]$76LQGRGDWQDLQIRUPDFLMD]D
SUHVNXãDQMHGHOQHL]YHGEHSURWRNROD3,;,7±3URIRUPDVSHFLILNDFLMD]DRPUHåMH
Integrated Services Digital Network (ISDN); User-to-User Signalling (UUS)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information
for Testing (PIXIT) proforma specification for the network
Ta slovenski standard je istoveten z: EN 300 286-6 Version 1.3.3
ICS:
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
SIST EN 300 286-6 V1.3.3:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 300 286-6 V1.3.3:2005

---------------------- Page: 2 ----------------------

SIST EN 300 286-6 V1.3.3:2005
ETSI EN 300 286-6 V1.3.3 (2000-05)
European Standard (Telecommunications series)
Integrated Services Digital Network (ISDN);
User-to-User Signalling (UUS) supplementary service;
Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 6: Abstract Test Suite (ATS) and partial Protocol
Implementation eXtra Information for Testing (PIXIT)
proforma specification for the network
�

---------------------- Page: 3 ----------------------

SIST EN 300 286-6 V1.3.3:2005
2 ETSI EN 300 286-6 V1.3.3 (2000-05)
Reference
REN/SPS-05168-6
Keywords
ATS, DSS1, ISDN, network, PIXIT,
supplementary service, UUS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.:[phone] Fax:[phone]
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network
drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/
If you find errors in the present document, send your comment to:
[e-mail]
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2000.
All rights reserved.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 300 286-6 V1.3.3:2005
3 ETSI EN 300 286-6 V1.3.3 (2000-05)
Contents
Intellectual Property Rights.6
Foreword .6
1 Scope.7
2 References.7
3 Definitions and abbreviations .8
3.1 Definitions.8
3.2 Abbreviations .8
4 Abstract Test Method (ATM) .9
4.1 Description of ATM used.9
4.1.1 Conventions for test components and PCOs .10
4.1.2 Conventions for variables and parameters .12
4.1.3 Special conventions for the UUS supplementary service.13
4.1.4 Conventions for point-to-multipoint configurations.13
4.2 Alternative ATM .14
5 Untestable Test Purposes (TPs) .15
6 ATS conventions.15
6.1 Declarations part .16
6.1.1 Type definitions .16
6.1.1.1 Simple type definitions.16
6.1.1.2 Structured type definitions .16
6.1.1.2.1 TTCN structured type definitions.16
6.1.1.2.2 ASN.1 structured type definitions.16
6.1.1.3 Abstract Service Primitive (ASP) type definitions.17
6.1.1.3.1 TTCN ASP type definitions.17
6.1.1.3.2 ASN.1 ASP type definitions .18
6.1.1.4 PDU type definitions.18
6.1.1.4.1 TTCN PDU type definitions.18
6.1.1.4.2 ASN.1 PDU type definitions .18
6.1.2 Test suite constants .18
6.1.3 Test suite parameters .18
6.1.4 Variables.18
6.1.4.1 Test suite variables.18
6.1.4.2 Test case variables .18
6.1.5 Test suite operation definitions.19
6.2 Constraints part.19
6.2.1 Structured type constraint declaration.19
6.2.2 ASN.1 type constraint declaration .19
6.2.2.1 Specification of encoding rules .20
6.2.3 ASP type constraint declaration.21
6.2.3.1 ASN.1 ASP type constraint declaration .21
6.2.3.2 TTCN ASP type constraint declaration.21
6.2.4 PDU type constraint declaration .21
6.2.4.1 ASN.1 PDU type constraint declaration.21
6.2.4.2 TTCN PDU type constraint declaration .21
6.2.5 Chaining of constraints .22
6.2.5.1 Static chaining.22
6.2.5.2 Dynamic chaining.22
6.2.6 Derived constraints .22
6.2.7 Parameterized constraints .22
6.2.8 Value assignment.22
6.2.8.1 Specific values .22
ETSI

---------------------- Page: 5 ----------------------

SIST EN 300 286-6 V1.3.3:2005
4 ETSI EN 300 286-6 V1.3.3 (2000-05)
6.2.8.2 Matching values .23
6.3 Dynamic part .23
6.3.1 Test cases.23
6.3.2 Test steps .23
6.3.2.1 PTC1_IN.23
6.3.2.2 PTC1_OUT.23
6.3.3 Defaults.23
7 ATS to TP map.24
8 PCTR conformance.24
9 PIXIT conformance.24
10 ATS conformance .24
Annex A (normative): Protocol Conformance Test Report (PCTR) proforma.25
A.1 Identification summary .25
A.1.1 Protocol conformance test report.25
A.1.2 IUT identification.25
A.1.3 Testing environment.25
A.1.4 Limits and reservations.26
A.1.5 Comments.26
A.2 IUT conformance status .26
A.3 Static conformance summary.26
A.4 Dynamic conformance summary.26
A.5 Static conformance review report .27
A.6 Test campaign report.28
A.7 Observations.32
Annex B (normative): Partial PIXIT proforma.33
B.1 Identification summary .33
B.2 ATS summary .33
B.3 Test laboratory .33
B.4 Client (of the test laboratory).34
B.5 System Under Test (SUT).34
B.6 Protocol information .35
B.6.1 Protocol identification .35
B.6.2 Parameter values.35
B.6.3 Codings of information elements.35
B.6.4 Configuration of IUT.36
B.6.5 Timer values.36
B.7 Basic call PIXIT items .37
B.7.1 Parameter values - information element codings.37
ETSI

---------------------- Page: 6 ----------------------

SIST EN 300 286-6 V1.3.3:2005
5 ETSI EN 300 286-6 V1.3.3 (2000-05)
Annex C (normative): Abstract Test Suite (ATS).38
C.1 The TTCN Graphical form (TTCN.GR).38
C.2 The TTCN Machine Processable form (TTCN.MP) .38
Annex D (informative): General structure of ATS.39
Annex E (informative): Change record.40
E.1 Changes between EN 300 286-6 V1.2 and 1.3 .40
E.2 Changes between ETS 300 286-6 and EN 300 286-6 V1.2 .40
History.41
ETSI

---------------------- Page: 7 ----------------------

SIST EN 300 286-6 V1.3.3:2005
6 ETSI EN 300 286-6 V1.3.3 (2000-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect
of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server
(http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)
which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Services and
Protocols for Advanced Networks (SPAN).
The present document is part 6 of a multi-part standard covering the Integrated Services Digital Network (ISDN); User-
to-User Signalling (UUS) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol, as
described below:
Part 1: "Protocol specification";
Part 2: "Protocol Implementation Conformance Statement (PICS) proforma specification";
Part 3: "Test Suite Structure and Test Purposes (TSS&TP) specification for the user";
Part 4: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)
proforma specification for the user";
Part 5: "Test Suite Structure and Test Purposes (TSS&TP) specification for the network";
Part 6: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing
(PIXIT) proforma specification for the network".
National transposition dates
Date of adoption of this EN: 5 May 2000
Date of latest announcement of this EN (doa): 31 August 2000
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 28 February 2001
Date of withdrawal of any conflicting National Standard (dow): 28 February 2001
ETSI

---------------------- Page: 8 ----------------------

SIST EN 300 286-6 V1.3.3:2005
7 ETSI EN 300 286-6 V1.3.3 (2000-05)
1 Scope
This sixth part of EN 300 286 specifies the Abstract Test Suite (ATS) and partial Protocol Implementation eXtra
Information for Testing (PIXIT) proforma for the Network side of the T reference point or coincident S and T reference
point (as defined in ITU-T Recommendation I.411 [11]) of implementations conforming to the stage three standard for
the User-to-User Signalling (UUS) supplementary service for the pan-European Integrated Services Digital Network
(ISDN) by means of the Digital Subscriber Signalling System No. one (DSS1) protocol, EN 300 286-1 [3].
EN 300 286-5 [5] specifies the Test Suite Structure and Test Purposes (TSS&TP) related to this ATS and partial PIXIT
proforma specification. Other parts specify the TSS&TP and the ATS and partial PIXIT proforma for the User side of
the T reference point or coincident S and T reference point of implementations conforming to EN 300 286-1 [3].
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
• A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same
number.
[1] ETSI EN 300 403-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling
System No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control;
Part 1: Protocol specification [ITU-T Recommendation Q.931 (1993), modified]".
[2] ETSI EN 300 196-1: "Integrated Services Digital Network (ISDN); Generic functional protocol for
the support of supplementary services; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
[3] ETSI EN 300 286-1 (V1.2): "Integrated Services Digital Network (ISDN); User-to-User Signalling
(UUS) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[4] ETSI EN 300 286-2 (V1.2): "Integrated Services Digital Network (ISDN); User-to-User Signalling
(UUS) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification".
[5] ETSI EN 300 286-5 (V1.2): "Integrated Services Digital Network (ISDN); User-to-User Signalling
(UUS) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network".
[6] ISO/IEC 9646-1: "Information technology - Open System Interconnection - Conformance testing
methodology and framework - Part 1: General concepts".
[7] ISO/IEC 9646-2: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 2: Abstract test suite specification".
[8] ISO/IEC 9646-3: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 3: The Tree and Tabular Combined Notation (TTCN)".
[9] ISO/IEC 9646-4: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 4: Test realization".
ETSI

---------------------- Page: 9 ----------------------

SIST EN 300 286-6 V1.3.3:2005
8 ETSI EN 300 286-6 V1.3.3 (2000-05)
[10] ISO/IEC 9646-5: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 5: Requirements on test laboratories and clients for the
conformance assessment process".
[11] ITU-T Recommendation I.411 (1993): "ISDN user-network interfaces - Reference configurations".
[12] CCITT Recommendation X.209 (1988): "Specification of basic encoding rules for Abstract Syntax
Notation One (ASN.1)".
[13] ETSI ETS 300 102 (all parts): "Integrated Services Digital Network (ISDN); User-network
interface layer 3; Specifications for basic call control".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
Abstract Test Suite (ATS): see ISO/IEC 9646-1 [6].
Implementation Under Test (IUT): see ISO/IEC 9646-1 [6].
Lower Tester (LT): see ISO/IEC 9646-1 [6].
Point of Control and Observation (PCO): see ISO/IEC 9646-1 [6].
Protocol Implementation Conformance Statement (PICS): see ISO/IEC 9646-1 [6].
PICS proforma: see ISO/IEC 9646-1 [6].
Protocol Implementation Extra Information for Testing (PIXIT): see ISO/IEC 9646-1 [6].
PIXIT proforma: see ISO/IEC 9646-1 [6].
System Under Test (SUT): see ISO/IEC 9646-1 [6].
UpperTester(UT): see ISO/IEC 9646-1 [6].
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
ASP Abstract Service Primitive
ATM Abstract Test Method
ATS Abstract Test Suite
BER Basic Encoding Rules
CM Co-ordination Message
CP Co-ordination Point
DSS1 Digital Subscriber Signalling System No. one
ExTS Executable Test Suite
ISDN Integrated Services Digital Network
IUT Implementation Under Test
LT Lower Tester
MOT Means Of Testing
MTC Main Test Component
PCO Point of Control and Observation
PDU Protocol Data Unit
PICS Protocol Implementation Conformance Statement
PIXIT Protocol Implementation eXtra Information for Testing
PTC Parallel Test Component
ETSI

---------------------- Page: 10 ----------------------

SIST EN 300 286-6 V1.3.3:2005
9 ETSI EN 300 286-6 V1.3.3 (2000-05)
SUT System Under Test
TP Test Purpose
TTCN Tree and Tabular Combined Notation
UT Upper Tester
UUS User-to-User Signalling
4 Abstract Test Method (ATM)
4.1 Description of ATM used
The requirement for testing the network Implementation Under Test (IUT) is to focus on the behaviour of the network
IUT at the user-network interface where a T reference point or coincident S and T reference point applies. Thus the IUT
is the network DSS1 protocol entity at a particular user-network interface and is not the whole network.
It is possible to specify an Abstract Test Suite (ATS) based on a single party (remote) test method for such an IUT.
However, it is considered that an ATS based on such an approach is of limited use as the only way to specify IUT
generated Protocol Data Units (PDUs) is to use the "implicit send" statement. Many users of such an ATS would replace
the "implicit send" statements with descriptions of the behaviour at other interfaces.
An ATS based on a multi-party test method is considered to be more useful in that it is closer to how a real test suite
would be constructed. Such a test method specifies behaviour at multiple network interfaces. One very important
limitation here is that tests are focused on one particular interface. Thus the test system is made up one Main Test
Component (MTC) and one or more Parallel Test Components (PTCs), see figure 1.
ETSI

---------------------- Page: 11 ----------------------

SIST EN 300 286-6 V1.3.3:2005
10 ETSI EN 300 286-6 V1.3.3 (2000-05)
4.1.1 Conventions for test components and PCOs
Master part Slave part
MTCA PTC2
CPA2
PTC1
CPA1
L0 PCO L1 PCO L2 PCO
IUT
NETWORK
Figure 1: Multi-party test method
In a master/slave arrangement, the MTC is considered to be the master while the PTCs are the slaves. The "slave" testers
are only an explicit description of how to deal with the "other" interfaces during the testing process, i.e. "how to make
the IUT send the required message".
This means, in particular, that the verdict will only be assigned from the protocol aspects observed on the interface
under test (i.e. by the "master" tester), as it would be observed by a terminal connected to this interface. A failure in the
correlation between the protocol at the different interfaces to which the different testers are connected, i.e. in the
mechanism of the functional service itself, will not cause a FAIL verdict. For instance, if the IUT fails to send a message
on the tested interface after another interface has received the proper stimulus, the verdict will be INCONCLUSIVE.
The MTC MTCA has two functions in this configuration. Firstly, it has the MTC function of controlling the one or more
PTCs. Thus it is responsible for starting the PTCs and afterwards co-ordinates activities by exchanging Co-ordination
Messages (CMs) with the PTCs. Secondly it is responsible for the behaviour of the Lower Tester (LT) at Point of
Control and Observation (PCO) L0.
A combination of the remote and multi-party test methods is applied. As can be seen from figure 1, several PCOs are
used. All PCOs reside at the service access points between layers 2 and 3.
ETSI

---------------------- Page: 12 ----------------------

SIST EN 300 286-6 V1.3.3:2005
11 ETSI EN 300 286-6 V1.3.3 (2000-05)
SUT
MTC PTC1,2
Layer 3 IUT Layer 3
 L0    L1,2 
Layer 2 Layer 2
 
      
Layer 1 Layer 1
Service provider
Figure 2: Combination of the remote and multi-party test methods
The MTC PCO is named "L0" ("L" for Lower). The L0 PCO is used to control and observe the behaviour of the IUT
and test case verdicts are assigned depending on the behaviour observed at
...