SIST EN 14218:2004

Hexagon nuts with flange - Fine pitch thread (ISO 10663:1999, modified)

This European Standard specifies the characteristics of hexagon nuts with flange, with metric fine pitch thread, with nominal thread diameters from 8 mm up to and including 20 mm, in product grade A for d = 16 mm and product grade B for d > 16 mm and with property classes 8, 10, 12 and A2-70.
If, in special cases, specifications other than those listed in this European Standard are required, they should be selected from existing European and International Standards, for example ISO 261 ISO 724, EN ISO 898-6, ISO 965-2, EN ISO 3506-2.

Sechskantmuttern mit Flansch - Feingewinde (ISO 10663:1999, modifiziert)

Diese Europäische Norm legt Eigenschaften für Sechskantmuttern mit Flansch mit metrischem Feingewinde mit Nenndurchmessern (d) von 8 mm bis 20 mm, mit Produktklasse A für d   16 mm und Produktklasse B für d > 16 mm und mit Festigkeitsklassen 8, 10, 12 und A2-70 fest.
Werden in besonderen Fällen andere Festlegungen als die in der vorliegenden Europäischen Norm benötigt, so sollten diese den bestehenden Europäischen oder Internationalen Normen entnommen werden, z. B. ISO 724, EN ISO 898-6, ISO 965-2, EN ISO 3506-2.

Ecrous hexagonaux a embase cylindro-tronçonique - Filetage a pas fin (ISO 10663:1999, modifiée)

Šestrobe matice s krajcem - Fini navoj (ISO 10663:1999, dopolnjen)

General Information

• Status: Published
• Publication Date: 31-Dec-2003
• ICS: 21.060.20 - Nuts
• Technical Committee: ISEL - Mechanical elements
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jan-2004
• Due Date: 01-Jan-2004
• Completion Date: 01-Jan-2004
• Ref Project: EN 14218:2003 - Hexagon nuts with flange - Fine pitch thread (ISO 10663:1999, modified)

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Šestrobe matice s krajcem - Fini navoj (ISO 10663:1999, dopolnjen)Sechskantmuttern mit Flansch - Feingewinde (ISO 10663:1999, modifiziert)Ecrous hexagonaux a embase cylindro-tronçonique - Filetage a pas fin (ISO 10663:1999, modifiée)Hexagon nuts with flange - Fine pitch thread (ISO 10663:1999, modified)21.060.20MaticeNutsICS:Ta slovenski standard je istoveten z:EN 14218:2003SIST EN 14218:2004en01-januar-2004SIST EN 14218:2004SLOVENSKI
STANDARD



SIST EN 14218:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14218April 2003ICS 21.060.20English versionHexagon nuts with flange - Fine pitch thread (ISO 10663:1999,modified)Ecrous hexagonaux à embase cylindro-tronçonique -Filetage à pas fin (ISO 10663:1999, modifiée)Sechskantmuttern mit Flansch - Feingewinde (ISO10663:1999, modifiziert)This European Standard was approved by CEN on 14 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14218:2003 ESIST EN 14218:2004



EN 14218:2003 (E)2ForewordThis document (EN 14218:2003) has been prepared by Technical Committee CEN/TC 185 "Threaded and non-threaded mechanical fasteners and accessories", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by October 2003, and conflicting national standards shall be withdrawn at the latestby October 2003.Annex A is normative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following coun-tries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 10663:1999 was approved by CEN as a European Standard with agreedcommon modifications as given below.Nuts in accordance with this European Standard correspond to those specified in the International Standard ISO10663:1999 with the exception that the width across flats for M10 is 16 mm (instead of 15 mm) and that the prop-erty class 9 was deleted. Moreover, the option for surface coatings according to EN ISO 10683 was added.SIST EN 14218:2004



EN 14218:2003 (E)31 ScopeThis European Standard specifies the characteristics of hexagon nuts with flange, with metric fine pitch thread, withnominal thread diameters from 8 mm up to and including 20 mm, in product grade A for d
16 mm and productgrade B for d > 16 mm and with property classes 8, 10, 12 and A2-70.If, in special cases, specifications other than those listed in this European Standard are required, they should beselected from existing European and International Standards, for example ISO 261 ISO 724, EN ISO 898-6,ISO 965-2, EN ISO 3506-2.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 493, Fasteners — Surface discontinuities — Nuts.EN 20225, Fasteners — Bolts, screws, studs and nuts — Symbols and designations of dimensions (ISO 225:1983).EN ISO 898-6, Mechanical properties of fasteners — Part 6: Nuts with specified proof load values — Fine pitchthread (ISO 898-6:1994).EN ISO 3269, Fasten
...