SIST EN ISO/IEC 7816-5:1997/A1:1997

Identification cards - Integrated circuit(s) cards with contacts - Part 5: Numbering system and registration procedure for application identifiers - Amendment 1 (ISO/IEC 7816-5:1994/A1:1996)

Identifikationskarten - Chipkarten mit Kontakten - Teil 5: Numerierungssystem und Registrierverfahren für Anwendungsbezeichner - Änderung 1 (ISO/IEC 7816-5:1994/A1:1996)

Cartes d'identification - Cartes a circuit(s) intégré(s) a contacts - Partie 5: Systeme de numérotation et procédure d'enregistrement pour les identificateurs d'applications - Amendement 1 (ISO/IEC 7816-5:1994/A1:1996)

Identification cards - Integrated circuit(s) cards with contacts - Part 5: Numbering system and registration procedure for application identifiers - Amendment 1 (ISO/IEC 7816-5:1994, Amendment 1:1996)

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-1997
• Withdrawal Date: 30-Apr-2004
• ICS: 35.240.15 - Identification cards. Chip cards. Biometrics
• Technical Committee: BFS - Banking and related financial services
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-May-2004
• Due Date: 01-May-2004
• Completion Date: 01-May-2004
• Ref Project: EN ISO/IEC 7816-5:1995/A1:1997 - Identification cards - Integrated circuit(s) cards with contacts - Part 5: Numbering system and registration procedure for application identifiers - Amendment 1 (ISO/IEC 7816-5:1994/A1:1996)

Relations

• Amends: SIST EN ISO/IEC 7816-5:1997 - Identification cards - Integrated circuit(s) cards with contacts - Part 5: Numbering system and registration procedure for application identifiers (ISO/IEC 7816-5:1994)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO/IEC 7816-5:1997/A1:1997
01-december-1997
Identification cards - Integrated circuit(s) cards with contacts - Part 5: Numbering
system and registration procedure for application identifiers - Amendment 1
(ISO/IEC 7816-5:1994, Amendment 1:1996)
Identification cards - Integrated circuit(s) cards with contacts - Part 5: Numbering system
and registration procedure for application identifiers - Amendment 1 (ISO/IEC 7816-
5:1994/A1:1996)
Identifikationskarten - Chipkarten mit Kontakten - Teil 5: Numerierungssystem und
Registrierverfahren für Anwendungsbezeichner - Änderung 1 (ISO/IEC 7816-
5:1994/A1:1996)
Cartes d'identification - Cartes a circuit(s) intégré(s) a contacts - Partie 5: Systeme de
numérotation et procédure d'enregistrement pour les identificateurs d'applications -
Amendement 1 (ISO/IEC 7816-5:1994/A1:1996)
Ta slovenski standard je istoveten z: EN ISO/IEC 7816-5:1995/A1:1997
ICS:
35.240.15 Identifikacijske kartice in Identification cards and
sorodne naprave related devices
SIST EN ISO/IEC 7816-5:1997/A1:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO/IEC 7816-5:1997/A1:1997

---------------------- Page: 2 ----------------------

SIST EN ISO/IEC 7816-5:1997/A1:1997

---------------------- Page: 3 ----------------------

SIST EN ISO/IEC 7816-5:1997/A1:1997

---------------------- Page: 4 ----------------------

SIST EN ISO/IEC 7816-5:1997/A1:1997
INTERNATIONAL lSO/IEC
STANDARD 7816-5
First edition
1994-06-I 5
AMENDMENT 1
1996-I 2-l 5
Identification cards - Integrated circuit(s)
cards with contacts -
Part 5:
Numbering system and registration procedure
for application identifiers
AMENDMENT 1
Cartes d ‘iden tifica tion - Cartes a circuit(s) in t&g&(s) 2 contacts -
Partie 5: Sys t&me de num&-o ta tion et procgdure d ‘enregis tremen t pour /es
iden tifica teurs d ‘applica tions
AMENDEMENT ?
Reference number
ISO/IEC 7816-5:1994/Amd.l :I 996(E)

---------------------- Page: 5 ----------------------

SIST EN ISO/IEC 7816-5:1997/A1:1997
O/IEC 7816.5:1994/Amd.l:1996(E)
Foreword
IS0 (the International Organization for Standardization) and IEC (the Inter-
national Electrotechnical Commission) form the specialized system for
worldwide standardization. National bodies that are members of IS0 or
IEC participate in the development of International Standards through
technical committees established by the respective organization to deal
with particular fields of technical activity. IS0 and IEC technical
committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with IS0 and
IEC, also take part in the work.
In the field of information technology, IS0 and IEC have established a joint
technical committee, ISO/IEC JTC 1. Draft International Standards adopted
by the joint technical committee are circulated to national bodies for
voting. Publication as an International Standard requires approval by at
least 75 % of the national bodies casting a vote.
Amendment 1 to International Standard ISO/IEC 7816-5:1994 was
prepared by Joint Technical Committee lSO/IEC JTC 1, Information
technology, Subcommittee SC 17, identification cards and related devices.
0 ISO/IEC 1996
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or
utilized in any form or by any means, electronic or mechanical, including photocopying and micro-
film, without permission in writing from the publisher.
ISO/IEC Copyright Office l Case postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 6 ----------------------

SIST EN ISO/IEC 7816-5:1997/A1:1997
EC ISO/lEC 7816~5:1994/Amd.l:1996(E)
Identification cards - Integrated circuit(s) cards with
contacts -
Part 5:
Numbering system and registration procedure for application
identifiers
AMENDMENT 1
Page 5
Clause 7
Replace by the following:
7.1.2 Criteria for approval and rejection of
7 Registration of identifiers
requests
7.1 Request and registration procedures
7.1.2.1 Criteria for approval of a request
for a RID
7.1.1 Request procedure for an
internationally registered RID
Requests for a RID shall meet all the following
criteria:
An application provider (including international
organisations) shall apply to the standards body of
a) the RID being issued shall be for use in
its related country (i.e. national standards body) or
an international environment;
agent appointed to act for its national member
body, or in the absence of a national standards
b) the applicant shall be:
body, to the secretariat of the IS0 technical body
- a corporate entity or its subsidiaries
responsible for this part of ISO/IEC 7816 for the
operating under a specific legislative
assignment of an internationally registered RID
regulation,
using the form shown in annex A. Registration
- an international organisation in charge of
forms are also available, on request, from the
specification of IC card applications;
ISO/IEC 7816-5 Registration Authority, the
secretariat of the Registration Management Group
c) the applicant requesting a RID shall not
(RMG) and the secretariat of the IS0 technical
already have a RID assigned to it in its
body responsible for this part of ISO/IEC 7816. The
own right. Exceptionally an applicant may
national standards body or the secretariat of the
apply for more than one RID, subject to
IS0 technical body responsible for this part of
decision by the RMG;
ISO/IEC 7816 then acts as the “Sponsoring
Authority” (see 7.4) with respect to the request.
d) the RID shall be used within one year
from registration.

---------------------- Page: 7 ----------------------

SIST EN ISO/IEC 7816-5:1997/A1:1997
ISWIEC 7816~5:1994/Amd.l:1996(E)
0 ISOhEC
a) statement of which rejection clause (see
7.1.2.2 Criteria for rejection of a request
7.1.2.2) is disputed and why the applicant
for a RID
believes that the rejected request fulfils the
criteria for acceptance (see 7.1.2.1);
A request for a RID shall be rejected if any of the
following conditions exist:
b) statement of special circumstances
whereby a specific requirement of the
a) the applicant does not meet the criteria
rejected request can be met, but such
as defined in 7.1.2.1;
requirement is
outside the current
procedures and criteria for acceptance
b) the applicant IS not an application
outlined in this international standard.
provider as defined in 3.1.2;
c) the applicant has requested a specific
7.3 Responsibilities of applicants
number or the reservation in the register of
a specific number or has made a request
which is outside the scope of this part of The responsibilities of applicants shall be:
ISO/IEC 7816;
a) to comply fully with the numbering
NOTE: Where special circumstances exist, the
system and the procedures for requesting
Sponsoring Authority may approve a request and
RIDS as contained in this part of ISO/lEC
forward the request to the ISO/IEC 7816-5
7816;
Registration Authority for assignment of a number.
Ail such assignments must be reported by the
b) to forward to its national standards body
Sponsoring Authority to the RMG.
or agent appointed to act for its national
member body, or in the absence of a
d) the RID is intended to be used to
national standards body, to the secretariat
identify or differentiate between branches
of the IS0 technical body responsible for
within the applicant ’s organisation (i.e.
this part of ISO/IEC 7816, a completed
these branches are not separate corporate
registration form, (see annex A) together
entities).
with the requisite fee;
7.2 Appeal process
NOTE: The registration fee is not refundable.
7.2.1 Appeal bodies
c) to retain the completed registration form
containing
the RID assigned to the
Where a request has been rejected by a
applicant by the ISO/IEC 7816-5
Sponsoring Authority the applicant may appeal to
Registration Authority;
the secretariat of the RMG (see 7.5). Where a
request has been rejected by the RMG, the
d) to provide applications using the RID
applicant may appeal to the IS0 technical body
assigned to the applicant by the ISO/IEC
responsible for this part of ISO/IEC 7816 through
7816-5 Registration Authority within a
the secretariat of that IS0 technical body.
reasonable time frame;
Applicants may submit for appeal requests that
have been rejected by the IS0 technical body
e) to inform the Sponsoring Authority of
responsible for this part of ISOIIEC 7816 to the
any modification to the data related to the
IS0 Central Secretariat.
assigned RID.
Appeal against rejection of a request shall be
7.4 Sponsoring Authorities
submitted to the appropriate body within 90 days of
the date of the letter of rejection.
7.4.1 Eligibility to become a Sponsoring
Authority
7.2.2 Information to be provided
The following bodies may act
as Sponsoring
Authorities in processing requests
for RIDS:
Where a request has been rejected by the
Sponsoring Authority, the following information
a) any national member body of IS0 (or
shall be provided by the applicant to the relevant
agent appointed to act for its national
appeal body in support of the appeal:
member body);
2

---------------------- Page: 8 ----------------------

SIST EN ISO/IEC 7816-5:1997/A1:1997
0 ISO/IEC lSO/lEC 7816~5:1994/Amd.l:1996(E)
b) the IS0 technical body responsible for h) to reject requests for a specific number
this part of ISO/IEC 7816; and and for reservation of a specific number or
any request outside the scope of this part
c) any group, except the RMG, within the of ISO/IEC 7816. Or, where special
IS0 techni
...