iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 300 494-1 V1.3.1:2003

(Main)

Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile Test Specification (PTS); Part 1: Summary

Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile Test Specification (PTS); Part 1: Summary

To be updated with relevant information derived from TBR022 which due to withdrawal after the full enforcement of the new R&TTE Directive.

Digitalne izboljšane brezvrvične telekomunikacije (DECT) – Profil generičnega dostopa (GAP) – Profil preskušalne specifikacije (PTS) – 1. del: Povzetek

General Information

Status
Published
Publication Date
30-Nov-2003
ICS
33.070.30 - Digital Enhanced Cordless Telecommunications (DECT)
Technical Committee
SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2003
Due Date
01-Dec-2003
Completion Date
01-Dec-2003
Ref Project
ETSI EN 300 494-1 V1.3.1 (2001-04) - Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile Test Specification (PTS); Part 1: Summary

Buy Standard

EN 300 494-1 V1.3.1:2003EN 300 494-1 V1.3.1:2003
PreviousNext
Standard
EN 300 494-1 V1.3.1:2003
English language
43 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.3RY]HWHNDigital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile Test Specification (PTS); Part 1: Summary33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:EN 300 494-1 Version 1.3.1SIST EN 300 494-1 V1.3.1:2003en01-december-2003SIST EN 300 494-1 V1.3.1:2003SLOVENSKI
STANDARD



SIST EN 300 494-1 V1.3.1:2003



ETSIEN300494-1V1.3.1(2001-04)EuropeanStandard(Telecommunicationsseries)DigitalEnhancedCordlessTelecommunications(DECT);GenericAccessProfile(GAP);ProfileTestSpecification(PTS);Part1:SummarySIST EN 300 494-1 V1.3.1:2003



ETSIETSIEN300494-1V1.3.1(2001-04)2ReferenceREN/DECT-040188-1KeywordsDECT,GAP,PTS,testingETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:+33492944200Fax:+33493654716SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:editor@etsi.frCopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2001.Allrightsreserved.SIST EN 300 494-1 V1.3.1:2003



ETSIETSIEN300494-1V1.3.1(2001-04)3ContentsIntellectualPropertyRights.5Foreword.51Scope.62References.63Definitionsandabbreviations.83.1Definitions.83.2Abbreviations.84Profileidentification.85ElementsofthePTS.95.1ConformancetestingforNWKlayer.95.2ConformancetestingforDLClayer.95.3ConformancetestingforMAClayer.105.4ConformancetestingforPHlayer.106Conformance.11AnnexA(normative):Requirements.12A.1Introduction.12A.2PortablePart(PP).13A.2.1TablesforPPNWKlayer.13A.2.1.1MajorCapabilities.13A.2.1.1.1Entities.13A.2.1.1.2CCfeatures.13A.2.1.1.3MMfeatures.14A.2.1.1.4SSfeatures(services).14A.2.1.1.5LCEfeatures.14A.2.1.1.6Procedures.15A.2.1.2Messages.17A.2.1.2.1Callcontrolmessages.17A.2.1.2.2Mobilitymanagementmessages.17A.2.1.2.3Linkcontrolentitymessages.18A.2.2TablesforPPDLClayer.18A.2.2.1Capabilities.18A.2.2.1.1Services.18A.2.2.1.2Procedures.19A.2.2.2ProtocolPDUs.20A.2.2.2.1C-planePDUs.20A.2.2.2.2C-planemessages.20A.2.2.2.3U-planePDUs.21A.2.3TablesforPPMAClayer.21A.2.3.1MajorCapabilities.21A.2.3.1.1Services.21A.2.3.1.1.1Connectionorientedcontrolservices.21A.2.3.1.1.2Broadcastcontrolservices.22A.2.3.1.1.3Multiplexingservices.22A.2.3.1.1.4Managementservices.22A.2.3.2Procedures.22A.2.3.2.1Connectionsetupprocedures.22A.2.3.2.2Connectiondatatransferprocedures.23A.2.3.2.3Connectionhandoverprocedures.23A.2.3.2.4Connectionreleaseprocedures.23A.2.3.2.5Broadcastprocedures.23A.2.3.2.6CSFmultiplexingprocedures.23SIST EN 300 494-1 V1.3.1:2003



ETSIETSIEN300494-1V1.3.1(2001-04)4A.2.3.2.7Layermanagementprocedures.24A.2.3.3Othercapabilities.24A.2.4TablesforPPPHLlayer.24A.2.4.1Physicallayerprocedures.24A.2.5TablesforPPApplicationrequirements.25A.2.5.1Applicationfeatures.25A.2.5.2ApplicationProcedures.25A.3FixedPart(FP).25A.3.1TablesforFPNWKlayer.25A.3.1.1Majorcapabilities.25A.3.1.1.1Entities.25A.3.1.1.2CCfeatures.26A.3.1.1.3MMfeatures.28A.3.1.1.4SSfeatures(services).29A.3.1.1.5LCEfeatures.29A.3.1.1.6Procedures.29A.3.1.2Messages.32A.3.1.2.1Callcontrolmessages.32A.3.1.2.2Mobilitymanagementmessages.33A.3.1.2.3Linkcontrolentitymessages.34A.3.2TablesforFPDLClayer.34A.3.2.1Capabilities.34A.3.2.1.1Services.34A.3.2.1.2Procedures.35A.3.2.2ProtocolPDUs.36A.3.2.2.1C-planePDUs.36A.3.2.2.2C-planemessages.36A.3.2.2.3U-planePDUs.37A.3.3TablesforFPMAClayer.37A.3.3.1MajorCapabilities.37A.3.3.1.1Services.37A.3.3.1.1.1Connectionorientedcontrolservices.37A.3.3.1.1.2Broadcastcontrolservices.37A.3.3.1.1.3Multiplexingservices.38A.3.3.1.1.4Managementservices.38A.3.3.2Procedures.38A.3.3.2.1Connectionsetupprocedures.38A.3.3.2.2Connectiondatatransferprocedures.39A.3.3.2.3Connectionhandoverprocedures.39A.3.3.2.4Connectionreleaseprocedures.39A.2.3.2.5Broadcastprocedures.39A.2.3.2.6CSFmultiplexingprocedures.39A.3.3.2.7Layermanagementprocedures.40A.3.3.3Othercapabilities.40A.3.4TablesforFPPHLlayer.40A.3.4.1Physicallayerprocedures.40A.3.5TablesforFPApplicationrequirements.40A.3.5.1Applicationfeatures.40A.2.5.2ApplicationProcedures.41AnnexB(informative):Bibliography.42History.43SIST EN 300 494-1 V1.3.1:2003



ETSIETSIEN300494-1V1.3.1(2001-04)5IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSIProjectDigitalEnhancedCordlessTelecommunications(DECT).Thepresentdocumentispart1ofamulti-partdeliverablecoveringtheGenericAccessProfile(GAP);ProfileTestSpecification(PTS);asidentifiedbelow:Part1:"Summary";Part2:"ProfileSpecificTestSpecification(PSTS)-PortableradioTermination(PT)";Part3:"ProfileSpecificTestSpecification(PSTS)-FixedradioTermination(FT)".NationaltranspositiondatesDateofadoptionofthisEN:30March2001DateoflatestannouncementofthisEN(doa):30June2001DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):31December2001DateofwithdrawalofanyconflictingNationalStandard(dow):31December2001SIST EN 300 494-1 V1.3.1:2003



ETSIETSIEN300494-1V1.3.1(2001-04)61ScopeThepresentdocumentspecifiestheProfileTestSpecification(PTS)summaryreferencingalltheENsnecessaryfortheconformancetestingoftheDECTGenericAccessProfile(GAP).ThisGAPPTSsummarytogetherwiththeENsitreferencesconstitutetheGAPPTS.Thepresentdocumenthasthefollowingstructure:-clause4containsgeneralinformationrelativetotheprofileincludingreferencestotherelatedENs;-clause5containsasummaryandreferencestotheENsrelevantforeachofDECTprotocollayerstobetested;-annexA(normative)containslistwiththegeneralstatusofGAPfeatures/servicesrelevantforterminalsseekingcompliancetotheEN300444[9]requirements.2ReferencesThefollowingdocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthepresentdocument.• Referencesareeitherspecific(identifiedbydateofpublicationand/oreditionnumberorversionnumber)ornon-specific.• Foraspecificreference,subsequentrevisionsdonotapply.• Foranon-specificreference,thelatestversionapplies.[1]ETSIEN300175-1:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part1:Overview".[2]ETSIEN300175-2:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part2:PhysicalLayer(PHL)".[3]ETSIEN300175-3:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part3:MediumAccessControl(MAC)layer".[4]ETSIEN300175-4:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part4:DataLinkControl(DLC)layer".[5]ETSIEN300175-5:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part5:Network(NWK)layer".[6]ETSIEN300175-6:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part6:Identitiesandaddressing".[7]ETSIEN300175-7:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part7:Securityfeatures".[8]ETSIEN300175-8:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part8:Speechcodingandtransmission".[9]ETSIEN300444:"DigitalEnhancedCordlessTelecommunications(DECT);GenericAccessProfile(GAP)".[10]ISO/IEC9646-1:"Informationtechnology;OpenSystemsInterconnection;Conformancetestingmethodologyandframework;Part1:Generalconcepts".[11]ISO/IEC9646-2:"Informationtechnology;OpenSystemsInterconnection;Conformancetestingmethodologyandframework;Part2:AbstractTestSuitespecification".SIST EN 300 494-1 V1.3.1:2003



ETSIETSIEN300494-1V1.3.1(2001-04)7[12]ISO/IEC9646-3:"Informationtechnology;OpenSystemsInterconnection;Conformancetestingmethodologyandframework;Part3:TheTreeandTabularCombinedNotation(TTCN)".[13]ISO/IEC9646-4:"Informationtechnology;OpenSystemsInterconnection;Conformancetestingmethodologyandframework;Part4:Testrealization".[14]ISO/IEC9646-5:"Informationtechnology;OpenSystemsInterconnection;Conformancetestingmethodologyandframework;Part5:Requirementsontestlaboratoriesandclientsfortheconformanceassessmentprocess".[15]ISO/IEC9646-6:"Informationtechnology;OpenSystemsInterconnection;Conformancetestingmethodologyandframework;Part6:Protocolprofiletestspecification".[16]ISO/IEC9646-7:"Informationtechnology;OpenSystemsInterconnection;Conformancetestingmethodologyandframework;Part7:ImplementationConformanceStatements".[17]ETSIEN300176:"DigitalEnhancedCordlessTelecommunications(DECT);Approvaltestspecification".[18]ETSIEN300476parts1to7:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);ProtocolImplementationConformanceStatement(PICS)proforma".[19]ETSIEN300497-1:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part1:TestSuiteStructure(TSS)andTestPurposes(TP)forMediumAccessControl(MAC)layer".[20]ETSIEN300497-2:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part2:AbstractTestSuite(ATS)forMediumAccessControl(MAC)layer-PortableradioTermination(PT)".[21]ETSIEN300497-3:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part3:AbstractTestSuite(ATS)forMediumAccessControl(MAC)layer-FixedradioTermination(FT)".[22]ETSIEN300497-4:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part4:TestSuiteStructure(TSS)andTestPurposes(TP)DataLinkControl(DLC)layer".[23]ETSIEN300497-5:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part5:AbstractTestSuite(ATS)-DataLinkControl(DLC)layer".[24]ETSIEN300497-6:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part6:TestSuiteStructure(TSS)andTestPurposes(TP)Network(NWK)layer-PortableradioTermination(PT)".[25]ETSIEN300497-7:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part7:AbstractTestSuite(ATS)forNetwork(NWK)layer-PortableradioTermination(PT)".[26]ETSIEN300497-8:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part8:TestSuiteStructure(TSS)andTestPurposes(TP)Network(NWK)layer-FixedradioTermination(FT)".[27]ETSIEN300497-9:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part9:AbstractTestSuite(ATS)forNetwork(NWK)layer-FixedradioTermination(FT)".[28]ETSIEN300474-1:"DigitalEnhancedCordlessTelecommunications(DECT);GenericAccessProfile(GAP);ProfilerequirementlistandprofilespecificImplementationConformanceStatement(ICS)proforma;Part1:PortableradioTermination(PT)".[29]ETSIEN300474-2:"DigitalEnhancedCordlessTelecommunications(DECT);GenericAccessProfile(GAP);ProfilerequirementlistandprofilespecificImplementationConformanceStatement(ICS)proforma;Part2:FixedradioTermination(FT)".SIST EN 300 494-1 V1.3.1:2003



ETSIETSIEN300494-1V1.3.1(2001-04)8[30]ETSIEN300494-2:"DigitalEnhancedCordlessTelecommunications(DECT);GenericAccessProfile(GAP);ProfileTestSpecification(PTS);Part2:ProfileSpecificTestSpecification(PSTS)PortableradioTermination(PT)".[31]ETSIEN300494-3:"DigitalEnhancedCordlessTelecommunications(DECT);GenericAccessProfile(GAP);ProfileTestSpecification(PTS);Part3:ProfileSpecificTestSpecification(PSTS)FixedradioTermination(FT)".3Definitionsandabbreviations3.1DefinitionsForthepurposesofthepresentdocument,thetermsanddefinitionsgiveninEN300175parts1to8[1]to[8],ISO/IEC9646parts1to7[10]to[16]andEN300444[9]apply.3.2AbbreviationsForthepurposesofthepresentdocument,thefollowingabbreviationsapply:ATMAbstractTestMethodATSAbstractTestSuiteCCCallControlentityCICommonInterfaceDECTDigitalEnhancedCordlessTelecommunicationsDLCDataLinkControllayerFTFixedradioTerminationGAPGenericAccessProfileICSImplementationConformanceStatementIXITImplementationeXtraInformationforTestingLCELinkControlEntityMACMediumAccessControllayerMMMobilityManagemententityPHPhysicallayerPICSProtocolImplementationConformanceStatementPIXITProtocolImplementationeXtraInformationforTestingPSTSProfileSpecificTestSpecificationPTPortableradioTerminationPTSProfileTestSpecificationSCSSystemConformanceStatement4ProfileidentificationTable1NoProfileidentification1ProfileidentifierGenericAccessProfile2ProfilespecificationEN300444[9]3ProfileICSproformaEN300474-2[29]4PSTSEN300494-2[30]EN300494-3[31]5ProfileIXITproformaEN300494-2[30]EN300494-3[31]6SCSproformaEN300494-2[30]EN300494-3[31]SIST EN 300 494-1 V1.3.1:2003



ETSIETSIEN300494-1V1.3.1(2001-04)95ElementsofthePTS5.1ConformancetestingforNWKlayerTable2NoProtocol1ProtocolidentificationEN300175-5[5]2PICSproformaEN300476[18]3TSSandTPEN300497-6[24]EN300497-8[26]4ATSEN300497-7[25]EN300497-9[27]5ApplicabilityofATSBasicspeechcovered.BasicservicesandproceduresconcerningCC,MMandLCEentitiescovered.6ATMRemote7PartialPIXITEN300497-7[25]EN300497-9[27]Table3NoProfile1ProfileICSproformaEN300474-2[29]2AdditionalTSSandTPNo3ATMRemote4AdditionaltestcasesNo5PartialProfileIXITproformaEN300494-2[30]andEN300494-3[31]6ModifiedselectionexpressionsNo5.2ConformancetestingforDLClayerTable4NoProtocol1ProtocolidentificationEN300175-4[4]2PICSproformaEN300476[18]3TSSandTPEN300497-4[22]4ATSEN300497-5[23]5ApplicabilityofATS6ATMRemote7PartialPIXITEN300497-5[23]Table5NoProfile1ProfileICSproformaEN300474-2[29]2AdditionalTSSandTPNo3ATMRemote4AdditionaltestcasesNo5PartialProfileIXITproformaEN300494-2[30]andEN300494-3[31]6ModifiedselectionexpressionsNoSIST EN 300 494-1 V1.3.1:2003



ETSIETSIEN300494-1V1.3.1(2001-04)105.3ConformancetestingforMAClayerTable6NoProtocol1ProtocolidentificationEN300175-3[3]2PICSproformaEN300476[18]3TSSandTPEN300497-1[19]4ATSEN300497-2[20]EN300497-3[21]5ApplicabilityofATS6ATMRemote(modified)7PartialPIXITEN300497-2[20]EN300497-3[21]Table7NoProfile1ProfileICSproformaEN300474-2[29]2AdditionalTSSandTPNo3ATMRemote(modified)4AdditionaltestcasesNo5PartialProfileIXITproformaEN300494-2[30]andEN300494-3[31]6ModifiedselectionexpressionsNo5.4ConformancetestingforPHlayerTable8NoProtocol1ProtocolidentificationEN300175-2[2]:Physicallayer[2]2PICSproformaEN300476[18]3TSSandTPEN300176[17]4ATSEN300176[17]5ApplicabilityofATSGeneralterminalattachmentrequirements,basictelephonyapplications6ATM-7PartialPIXIT-Table9NoProfile1ProfileICSproformaEN300474-2[29]2AdditionalTSSandTPEN300494-2[30]andEN300494-3[31]3ATM-4AdditionaltestcasesEN300494-2[30]andEN300494-3[31]5PartialProfileIXITproformaEN300494-2[30]andEN300494-3[31]6ModifiedselectionexpressionsNoSIST EN 300 494-1 V1.3.1:2003



ETSIETSIEN300494-1V1.3.1(2001-04)116ConformanceThetestrealizerofaMeansOfTesting(MOT)forthisPTSsummaryshallcomplywiththerequirementsofISO/IEC9646-4[13].Inparticular,therealizationofeachreferencedATSshallconformtotheATSspecificationconsistentwiththemodificationsmadebythePSTSreferencedbythisPTSsummary.TherealizationoftheATSwithinthePSTSshallconformtothePSTS.ThelaboratoriesrunningconformancetestservicesaccordingtothisPTSsummaryshallcomplywithISO/IEC9646-5[14].SIST EN 300 494-1 V1.3.1:2003



ETSIETSIEN300494-1V1.3.1(2001-04)12AnnexA(normative):RequirementsA.1IntroductionTheGAPfeatures,servicesandrequirementsasdefinedinEN300444[9],andwhichareconsideredessentialoroptionalessentialrequirementsforaterminalclaimingconformityaregiveninthefollowingclauses.ThetablesindicatewhichfeaturesandproceduresaretobeconsideredMandatory(M),Optional(O)orConditional(C)forsuchterminals.ThefeaturesandproceduresarereferencedviaanexistingprofileICSdocument.Thefollowingtableheadersareapplicable:Itemisanumberuniqueinthetabletobeusedforreferences.EachtablecarriesthetablenumberofthecorrespondingPICStableinEN300476[18],thereforeinordertohavematchingitemnumbers,itemnumberinginthesetablesmaynotbecontinuous.ReferencereferencestoEN300444[9],theGAPprofilespecification,unlessotherwisespecified.Status(St)containsthestatusrequiredforimplementationconformingtoGAPstandard[4].Support(Sp)isthecolumnforthemanufacturer'sstatementofwhethertheparticularitemissupportedbytheimplementation.Sendspecifieswhetherthesupportofsendingamessage,frameorinformationelementisrequired.Receivespecifieswhetherthesupportofreceivingamessage,frameorinformationelementisrequired.Theinterpretationofstatuscolumnsinalltablesisasfollows:morMmandatory-thecapabilityisrequiredtobesupported.oorOoptional-thecapabilitymaybesupportedornot.n/aorN/Anotapplicable-inthegivencontext,itisimpossibletousethecapability.xorXprohibited(excluded)-thereisarequirementnottousethiscapabilityinthegivencontext.o.iorO.iqualifiedoptional-formutuallyexclusiveorselectableoptionsfromaset."i"isanintegerwhichidentifiesauniquegroupofrelatedoptionalitemsandthelogicoftheirselectionwhichisdefinedimmediatelyfollowingthetable.ciorCiconditional-therequirem
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 300 175-3 V1.8.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 3: Medium Access Control (MAC) layer
ETSI EN 300 175-3 V1.8.1 (2004-11)

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). The present document of the DECT CI specifies the Medium Access Control (MAC) layer. The MAC layer is part 3 of the DECT Common Interface standard and layer 2a of the DECT protocol stack. It specifies three groups of MAC services:
- the broadcast message control service;
- the connectionless message control service; and
- the multi-bearer control service.
It also specifies the logical channels that are used by the above mentioned services, and how they are multiplexed and mapped into the Service Data Units (SDUs) that are exchanged with the Physical Layer (PHL).

  • Standard
    238 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 175-4 V1.9.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 4: Data Link Control (DLC) layer
ETSI EN 300 175-4 V1.9.1 (2005-09)

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). The present document specifies the Data Link Control (DLC) layer. The DLC layer is part 4 of the DECT CI standard and layer 2b of the DECT protocol stack.
Two planes of operation are specified for this DLC (sub)layer. These planes are called the Control plane (C-plane) and the User plane (U-plane). The C-plane is mostly concerned with the DECT signalling aspects. It provides a reliable point-to-point service that uses a link access protocol to offer error protected transmission of Network (NWK) layer messages. The C-plane also provides a separate point-to-multipoint (broadcast) service (Lb). The U-plane is only concerned with end-to-end user information. This plane contains most of the application dependent procedures of DECT. Several alternative services (both circuit-mode and packet-mode) are defined as a family of independent entities. Each service provides one or more point-to-point U-plane data links, where the detailed characteristics of those links are determined by the particular needs of each service. The defined services cover a wide range of performance, from "unprotected with low delay" for speech applications to "highly protected with variable delay", for local area network applications. NOTE: The performance of the DLC services need not be tight to any particular application. For example the "unprotected with low delay" service could also be used for data applications, e.g. if some data protection is provided outside the DECT protocol. The present document uses the layered model principles and terminology as described in ITU-T Recommendation X.200 [12] and ITU-T Recommendation X.210 [13].

  • Standard
    150 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 175-1 V1.9.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 1: Overview
ETSI EN 300 175-1 V1.9.1 (2005-09)

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI).
The present document contains an abstract of the other parts of the DECT standard together with a general description of:
- the objectives of the present document;
- the DECT Common Interface;
- the protocol architecture of DECT.
The present document also provides an extensive vocabulary; in particular it contains the common definitions of all the technical terms used in different parts of the present document.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 175-3 V1.9.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 3: Medium Access Control (MAC) layer
ETSI EN 300 175-3 V1.9.1 (2005-09)

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). The present document of the DECT CI specifies the Medium Access Control (MAC) layer. The MAC layer is part 3 of the DECT Common Interface standard and layer 2a of the DECT protocol stack.
It specifies three groups of MAC services:
• the broadcast message control service;
• the connectionless message control service; and
• the multi-bearer control service.
It also specifies the logical channels that are used by the above mentioned services, and how they are multiplexed and mapped into the Service Data Units (SDUs) that are exchanged with the Physical Layer (PHL).

  • Standard
    235 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 175-4 V1.8.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 4: Data Link Control (DLC) layer
ETSI EN 300 175-4 V1.8.1 (2004-11)

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI).
The present document specifies the Data Link Control (DLC) layer. The DLC layer is part 4 of the DECT CI standard and layer 2b of the DECT protocol stack.
Two planes of operation are specified for this DLC (sub)layer. These planes are called the Control plane (C-plane) and the User plane (U-plane). The C-plane is mostly concerned with the DECT signalling aspects. It provides a reliable point-to-point service that uses a link access protocol to offer error protected transmission of Network (NWK) layer messages. The C-plane also provides a separate point-to-multipoint (broadcast) service (Lb). The U-plane is only concerned with end-to-end user information. This plane contains most of the application dependent procedures of DECT. Several alternative services (both circuit-mode and packet-mode) are defined as a family of independent entities. Each service provides one or more point-to-point U-plane data links, where the detailed characteristics of those links are determined by the particular needs of each service. The defined services cover a wide range of performance, from "unprotected with low delay" for speech applications to "highly protected with variable delay", for local area network applications. The present document uses the layered model principles and terminology as described in ITU-T Recommendation X.200 [12] and ITU-T Recommendation X.210 [13].

  • Standard
    152 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 175-6 V1.8.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 6: Identities and addressing
ETSI EN 300 175-6 V1.8.1 (2004-11)

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). The present document specifies the identities and addressing structure of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). There are four categories of identities to be used for identification and addressing in a general DECT environment.
These four categories are:
- Fixed Part (FP) identities;
- Portable Part (PP) identities;
- connection-related identities;
- equipment-related identities.
Fixed part identities and portable part identities are used for:
- access information from fixed parts to portable parts;
- access requests from portable parts;
- identification of portable parts;
- identification of fixed parts and radio fixed parts;
- paging;
- billing.
These identities support:
- different environments, such as residential, public or private;
- supply to manufacturers, installers, and operators of globally unique identity elements with a minimum of central administration;
- multiple access rights for the same portable;
- large freedom for manufacturers, installers, and operators to structure the fixed part identities, e.g. to facilitate provision of access rights to groups of DECT systems;
- roaming agreements between DECT networks run by the same or different owners/operators;
- indication of handover domains;
- indication of location areas, i.e. paging area;
- indication of subscription areas of a public service.
The present document also provides for length indicators and other messages that can override the default location and/or paging area and domain indications given by the structure of the identities.
Connection related identities are used to identify the protocol instances associated with a call and are used for peer-to-peer communication. Equipment related identities are used to identify a stolen PP and to derive a default identity coding for PP emergency call set-up.
Coding of identity information elements for higher layer messages is found in EN 300 175-5 [5], clause 7.7.
User authentication and ciphering need additional key information and is outside the scope of the present document, but is covered in other parts of EN 300 175 parts 1 to 8 [1] to [7], e.g. part 7.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 175-2 V1.8.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 2: Physical Layer (PHL)
ETSI EN 300 175-2 V1.8.1 (2004-11)

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI).
The present document of the DECT CI specifies the physical channel arrangements. DECT physical channels are radio communication paths between two radio end points. A radio end point is either part of the fixed infrastructure or a Portable Part (PP), typically a handset. The assignment of one or more particular physical channels to a call is the task of higher layers.
The Physical Layer (PHL) interfaces with the Medium Access Control (MAC) layer, and with the Lower Layer Management Entity (LLME). On the other side of the PHL is the radio transmission medium which has to be shared extensively with other DECT users and a wide variety of other radio services. The tasks of the PHL can be grouped into five categories:
a) to modulate and demodulate radio carriers with a bit stream of a defined rate to create a radio frequency channel;
b) to acquire and maintain bit and slot synchronization between transmitters and receivers;
c) to transmit or receive a defined number of bits at a requested time and on a particular frequency;
d) to add and remove the synchronization field and the Z-field used for rear end collision detection;
e) to observe the radio environment to report signal strengths.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 176-2 V1.5.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Test specification; Part 2: Speech
ETSI EN 300 176-2 V1.5.1 (2004-01)

The present document specifies the tests applicable to all Digital Enhanced Cordless Telecommunications (DECT) equipment accessing the DECT frequency band 1 880 MHz to 1 900 MHz (including provisions for testing other or extended frequency bands) and the tests applicable to DECT speech transmission using ITU-T Recommendation G.726 [17] ADPCM speech codec at 32 kbit/s.
The aims of the present document are to ensure:
- efficient use of frequency spectrum;
- no harm done to any connected network and its services;
- no harm done to other radio networks and services;
- no harm done to other DECT equipment or its services;
- interworking of terminal equipment via the public telecommunications network, through testing those provisions of EN 300 175, parts 1 [1] to 8 [8] which are relevant to these aims.
The tests of EN 300 176 are split into two parts:
- part 1 covers testing of radio frequency parameters, security elements and those DECT protocols that facilitate the radio frequency tests and efficient use of frequency spectrum;
- part 2 (the present document) describes testing of DECT 32 kbit/s ADPCM speech requirements between network interface and DECT PT, or between a DECT CI air interface and alternatively a DECT PT or FT.
This part is not applicable to terminal equipment specially designed for the disabled (e.g. with amplification of received speech as an aid for the hard of hearing).
DECT terminal equipment consists of the following elements:
a) Fixed Part (FP);
b) Portable Part (PP);
c) Cordless Terminal Adapter (CTA);
d) Wireless Relay Station (WRS) (FP and PP combined).
The present document is structured to allow tests of either:
a) the FP and PP together; or
b) the FP and PP as separate items.
Where the DECT FP is connected to a PSTN, and there are any peculiarities in the requirements for voice telephony, these shall be accommodated within the FP.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 175-5 V1.9.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 5: Network (NWK) layer
ETSI EN 300 175-5 V1.9.1 (2005-09)

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). The present document specifies the Network (NWK) layer. The NWK layer is part 5 of the EN 300 175 and layer 3 of the DECT protocol stack.The present document only specifies the C-plane (control plane) of the DECT NWK layer. It contains no specification for the U-plane (user plane) because the U-plane is null for all services at the DECT NWK layer. The C-plane contains all of the internal signalling information, and the NWK layer protocols are grouped into the following families of procedures:
• Call Control (CC);
• Supplementary Services (SS);
• Connection Oriented Message Service (COMS);
• ConnectionLess Message Service (CLMS);
• Mobility Management (MM);
• Link Control Entity (LCE).
The present document uses the layered model principles and terminology as described in ITU-T Recommendation X.200 and ITU-T Recommendation X.210.

  • Standard
    309 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 175-6 V1.9.1:2006(Main)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 6: Identities and addressing
ETSI EN 300 175-6 V1.9.1 (2005-09)

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). The present document specifies the identities and addressing structure of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI).
There are four categories of identities to be used for identification and addressing in a general DECT environment. These four categories are:
• Fixed Part (FP) identities;
• Portable Part (PP) identities;
• connection-related identities;
• equipment-related identities.
Fixed part identities and portable part identities are used for:
• access information from fixed parts to portable parts;
• access requests from portable parts;
• identification of portable parts;
• identification of fixed parts and radio fixed parts;
• paging;
• billing.
These identities support:
• different environments, such as residential, public or private;
• supply to manufacturers, installers, and operators of globally unique identity elements with a minimum of central administration;
• multiple access rights for the same portable;
• large freedom for manufacturers, installers, and operators to structure the fixed part identities, e.g. to facilitate provision of access rights to groups of DECT systems;
• roaming agreements between DECT networks run by the same or different owners/operators;
• indication of handover domains;
• indication of location areas, i.e. paging area;
• indication of subscription areas of a public service.
The present document also provides for length indicators and other messages that can override the default location and/or paging area and domain indications given by the structure of the identities.
Connection related identities are used to identify the protocol instances associated with a call and are used for peer-to-peer communication.
Equipment related identities are used to identify a stolen PP and to derive a default identity coding for PP emergency call set-up.
Coding of identity information elements for higher layer messages is found in EN 300 175-5 [5], clause 7.7.
User authentication and ciphering need additional key information and is outside the scope of the present document, but is covered in other parts of EN 300 175-1 [1] to EN 300 175-8 [7], e.g. EN 300 175-7 [6].

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day