iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 10524-1:2019/oprA1:2023

(Amendment)

Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices - Amendment 1 (ISO 10524-1:2018/DAM 1:2023)

Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices - Amendment 1 (ISO 10524-1:2018/DAM 1:2023)

Druckminderer zur Verwendung mit medizinischen Gasen - Teil 1: Druckminderer und Druckminderer mit Durchflussmessgeräten - Änderung 1 (ISO 10524 1:2018/DAM 1:2023)

No scope available

Détendeurs pour l'utilisation avec les gaz médicaux - Partie 1: Détendeurs et détendeurs-débitmètres - Amendement 1 (ISO 10524-1:2018/DAM 1:2023)

Tlačni regulatorji za medicinske pline - 1. del: Tlačni regulatorji in tlačni regulatorji s pretočnimi merilniki - Dopolnilo A1 (ISO 10524-1:2018/DAM 1:2023)

General Information

Status
Not Published
Public Enquiry End Date
16-May-2023
ICS
11.040.10 - Anaesthetic, respiratory and reanimation equipment
23.060.40 - Pressure regulators
Technical Committee
VAZ - Healthcare
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
07-Dec-2023
Due Date
11-Feb-2024
Ref Project
EN ISO 10524-1:2019/A1:2023 - Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices - Amendment 1 (ISO 10524-1:2018/Amd 1:2023)

Relations

Amends
SIST EN ISO 10524-1:2019 - Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2018)
Effective Date
07-Dec-2022

Buy Standard

EN ISO 10524-1:2019/oprA1:2023EN ISO 10524-1:2019/oprA1:2023
PreviousNext
Draft
EN ISO 10524-1:2019/oprA1:2023
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10524-1:2019/oprA1:2023
01-maj-2023
Tlačni regulatorji za medicinske pline - 1. del: Tlačni regulatorji in tlačni regulatorji
s pretočnimi merilniki - Dopolnilo A1 (ISO 10524-1:2018/DAM 1:2023)
Pressure regulators for use with medical gases - Part 1: Pressure regulators and
pressure regulators with flow-metering devices - Amendment 1 (ISO 10524-1:2018/DAM
1:2023)
Druckminderer zur Verwendung mit medizinischen Gasen - Teil 1: Druckminderer und
Druckminderer mit Durchflussmessgeräten - Änderung 1 (ISO 10524 1:2018/DAM
1:2023)
Détendeurs pour l'utilisation avec les gaz médicaux - Partie 1: Détendeurs et
détendeurs-débitmètres - Amendement 1 (ISO 10524-1:2018/DAM 1:2023)
Ta slovenski standard je istoveten z: EN ISO 10524-1:2019/prA1
ICS:
11.040.10 Anestezijska, respiratorna in Anaesthetic, respiratory and
reanimacijska oprema reanimation equipment
23.060.40 Tlačni regulatorji Pressure regulators
SIST EN ISO 10524-1:2019/oprA1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 10524-1:2019/oprA1:2023

---------------------- Page: 2 ----------------------
SIST EN ISO 10524-1:2019/oprA1:2023
DRAFT AMENDMENT
ISO 10524-1:2018/DAM 1
ISO/TC 121/SC 6 Secretariat: ANSI
Voting begins on: Voting terminates on:
2023-02-22 2023-05-17
Pressure regulators for use with medical gases —
Part 1:
Pressure regulators and pressure regulators with flow-
metering devices
AMENDMENT 1
Détendeurs pour l'utilisation avec les gaz médicaux —
Partie 1: Détendeurs et détendeurs-débitmètres
AMENDEMENT 1
ICS: 11.040.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 10524-1:2018/DAM 1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
SIST EN ISO 10524-1:2019/oprA1:2023
ISO 10524-1:2018/DAM 1:2023(E)
DRAFT AMENDMENT
ISO 10524-1:2018/DAM 1
ISO/TC 121/SC 6 Secretariat: ANSI
Voting begins on: Voting terminates on:

Pressure regulators for use with medical gases —
Part 1:
Pressure regulators and pressure regulators with flow-
metering devices
AMENDMENT 1
Détendeurs pour l'utilisation avec les gaz médicaux —
Partie 1: Détendeurs et détendeurs-débitmètres
AMENDEMENT 1
ICS: 11.040.10
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO 10524-1:2018/DAM 1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 4 ----------------------
SIST EN ISO 10524-1:2019/oprA1:2023
ISO 10524-1:2018/DAM 1:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been esta
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 10524-1:2019(Main)
Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2018)
EN ISO 10524-1:2019

This document specifies the design, construction, type testing, and marking requirements for pressure
regulators (as defined in 3.18) intended for the administration of medical gases and their mixtures
in the treatment, management, diagnostic evaluation and care of patients or for gases used for driving
surgical tools.
Examples of gases include oxygen, medical air and oxygen/nitrous oxide mixtures.
This document applies to pressure regulators:
a) intended to be connected to cylinders by the operator;
b) with integral flow-metering devices intended to be connected to cylinders by the operator;
c) that are an integral part of medical equipment (e.g. anaesthetic workstations, lung ventilators,
resuscitators).
A pressure regulator can be provided with pressure outlet or flow outlet, and can be adjustable
or pre-set.
pressure regulators are intended to be fitted to refillable cylinders with a working pressure up
to 30 000 kPa ( 300 bar) and can be provided with devices which control and measure the flow of the
medical gas delivered.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10524-3:2019(Main)
Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (VIPRs) (ISO 10524-3:2019)
EN ISO 10524-3:2019

This document specifies design, type testing, and marking requirements for cylinder valves with
integrated pressure regulators [as defined in 3.26 and referred to hereafter as valves with
integrated pressure regulators (VIPRs)] intended for the administration of medical gases in
the treatment, management, diagnostic evaluation and care of patients or for gases used for driving
surgical tools.
Examples of gases include oxygen, medical air and oxygen/nitrous oxide mixtures.
This document applies to VIPRs mounted on refillable cylinders with a working pressure up to
30 000 kPa (300 bar) intended to be filled in cylinder filling facilities or on self-filling systems as used
in homecare applications.
VIPRs covered by this document are pressure pre-set and provided with a pressure outlet and/or
pre-set flow outlet(s).

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10524-2:2019(Main)
Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2018)
EN ISO 10524-2:2019

This document specifies design, construction, type testing, and marking requirements for manifold
pressure regulators (as defined in 3.7) and line pressure regulators (as defined in 3.5) intended
for use in medical gas pipeline systems.
Examples of gases include oxygen, medical air and oxygen/nitrous oxide mixtures.
This document applies to manifold pressure regulators and line pressure regulators supplied
as individual units or to the relevant components incorporated within an assembly.
Manifold pressure regulators are intended to be connected to a manifold system which has a
nominal inlet pressure, P1 of up to 30 000 kPa (300 bar).
Line pressure regulators are intended to be connected downstream of the manifold pressure
regulator with a supply pressure up to 3 000 kPa (30 bar).
This document does not apply to pressure regulators for use with vacuum pipeline systems.
NOTE Requirements for pressure regulators for use with vacuum pipeline systems are covered in
ISO 10079-3.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10524-4:2008
Pressure regulators for use with medical gases - Part 4: Low-pressure regulators (ISO 10524-4:2008)
EN ISO 10524-4:2008

This part of ISO 10524 applies to the types of low-pressure regulators listed in 1.2 and intended to be used with the following medical gases in the treatment, management, diagnostic evaluation and care of patients: - oxygen; - nitrous oxide; - medical air; - helium; - carbon dioxide; - xenon; - specified mixtures of the gases listed above; - air for driving surgical tools; - nitrogen for driving surgical tools; - oxygen-enriched air. The types of low-pressure regulators covered by this part of ISO 10524 are as follows: a) low-pressure regulators intended to be connected to terminal units of medical gas pipeline systems complying with ISO 7396-1; b) low-pressure regulators with integral flow-metering devices intended to be connected to terminal units of complying with ISO 7396-1; b) low-pressure regulators with integral flow-metering devices intended to be connected to terminal units of medical gas pipeline systems complying with ISO 7396-1; c) low-pressure regulators intended to be connected to terminal units attached to pressure regulators complying with ISO 10524-1 or ISO 10524-3; d) operator-adjustable low-pressure regulators for air or nitrogen for driving surgical tools that are an integral part of a medical gas pipeline system complying with ISO 7396-1.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 407:2023(Main)
Small medical gas cylinders - Pin-index yoke-type valve connections (ISO 407:2023)
EN ISO 407:2023

This document is applicable to pin-index yoke-type valve connections for medical gas cylinders, with a working pressure up to a maximum of 200 bar or test pressure up to a maximum of 300 bar, or both.
NOTE 1    This type of connection is primarily used for small cylinders (5 l or below).
NOTE 2    In this document the unit bar is used, due to its universal use in the field of technical gases. It should, however, be noted that bar is not an SI unit, and that the corresponding SI unit for pressure is Pa (1 bar = 105 Pa = 105 N/m2).
This document specifies:
—    basic dimensions;
—    requirements for alternative designs of the yoke-type valve connections;
—    dimensions and positions for the holes and pins for the outlet connections.
It also specifies the dimensions and positions for the holes and pins for the outlet connections for gases and gas mixtures.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10524-1:2019(Main)
Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2018)
EN ISO 10524-1:2019

This document specifies the design, construction, type testing, and marking requirements for pressure
regulators (as defined in 3.18) intended for the administration of medical gases and their mixtures
in the treatment, management, diagnostic evaluation and care of patients or for gases used for driving
surgical tools.
Examples of gases include oxygen, medical air and oxygen/nitrous oxide mixtures.
This document applies to pressure regulators:
a) intended to be connected to cylinders by the operator;
b) with integral flow-metering devices intended to be connected to cylinders by the operator;
c) that are an integral part of medical equipment (e.g. anaesthetic workstations, lung ventilators,
resuscitators).
A pressure regulator can be provided with pressure outlet or flow outlet, and can be adjustable
or pre-set.
pressure regulators are intended to be fitted to refillable cylinders with a working pressure up
to 30 000 kPa ( 300 bar) and can be provided with devices which control and measure the flow of the
medical gas delivered.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10524-3:2019(Main)
Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (VIPRs) (ISO 10524-3:2019)
EN ISO 10524-3:2019

This document specifies design, type testing, and marking requirements for cylinder valves with
integrated pressure regulators [as defined in 3.26 and referred to hereafter as valves with
integrated pressure regulators (VIPRs)] intended for the administration of medical gases in
the treatment, management, diagnostic evaluation and care of patients or for gases used for driving
surgical tools.
Examples of gases include oxygen, medical air and oxygen/nitrous oxide mixtures.
This document applies to VIPRs mounted on refillable cylinders with a working pressure up to
30 000 kPa (300 bar) intended to be filled in cylinder filling facilities or on self-filling systems as used
in homecare applications.
VIPRs covered by this document are pressure pre-set and provided with a pressure outlet and/or
pre-set flow outlet(s).

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10524-2:2019(Main)
Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2018)
EN ISO 10524-2:2019

This document specifies design, construction, type testing, and marking requirements for manifold
pressure regulators (as defined in 3.7) and line pressure regulators (as defined in 3.5) intended
for use in medical gas pipeline systems.
Examples of gases include oxygen, medical air and oxygen/nitrous oxide mixtures.
This document applies to manifold pressure regulators and line pressure regulators supplied
as individual units or to the relevant components incorporated within an assembly.
Manifold pressure regulators are intended to be connected to a manifold system which has a
nominal inlet pressure, P1 of up to 30 000 kPa (300 bar).
Line pressure regulators are intended to be connected downstream of the manifold pressure
regulator with a supply pressure up to 3 000 kPa (30 bar).
This document does not apply to pressure regulators for use with vacuum pipeline systems.
NOTE Requirements for pressure regulators for use with vacuum pipeline systems are covered in
ISO 10079-3.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10524-4:2008
Pressure regulators for use with medical gases - Part 4: Low-pressure regulators (ISO 10524-4:2008)
EN ISO 10524-4:2008

This part of ISO 10524 applies to the types of low-pressure regulators listed in 1.2 and intended to be used with the following medical gases in the treatment, management, diagnostic evaluation and care of patients: - oxygen; - nitrous oxide; - medical air; - helium; - carbon dioxide; - xenon; - specified mixtures of the gases listed above; - air for driving surgical tools; - nitrogen for driving surgical tools; - oxygen-enriched air. The types of low-pressure regulators covered by this part of ISO 10524 are as follows: a) low-pressure regulators intended to be connected to terminal units of medical gas pipeline systems complying with ISO 7396-1; b) low-pressure regulators with integral flow-metering devices intended to be connected to terminal units of complying with ISO 7396-1; b) low-pressure regulators with integral flow-metering devices intended to be connected to terminal units of medical gas pipeline systems complying with ISO 7396-1; c) low-pressure regulators intended to be connected to terminal units attached to pressure regulators complying with ISO 10524-1 or ISO 10524-3; d) operator-adjustable low-pressure regulators for air or nitrogen for driving surgical tools that are an integral part of a medical gas pipeline system complying with ISO 7396-1.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 19:2024(Main)
Industrial valves - Marking of metallic valves
EN 19:2023

This European Standard specifies the requirements for marking of industrial metallic valves. It defines the method of applying the markings, on the body, on a flange, on an identification plate or any other location.
When specified as a normative reference in a valve product or performance standard, this European Standard has to be considered in conjunction with the specified requirements of that valve product or performance standard.
The marking requirements for plastic valves are not within the scope of this European Standard.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day