SIST EN 300 745-1 V1.2.4:2005

Integrated Services Digital Network (ISDN); Message Waiting Indication (MWI) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1: Protocol specification

Update references from ETS 300 102-1 and associated I-ETSs to ETS 300 403.

Digitalno omrežje z integriranimi storitvami (ISDN) - Dopolnilna storitev: indikacija čakajočega sporočila (MWI) - Protokol digitalne naročniške signalizacije št. 1 (DSS1) - 1. del: Specifikacija protokola

General Information

• Status: Published
• Publication Date: 31-Mar-2005
• ICS: 33.080 - Integrated Services Digital Network (ISDN)
• Technical Committee: SPN - Services and Protocols for Networks
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Apr-2005
• Due Date: 01-Apr-2005
• Completion Date: 01-Apr-2005
• Ref Project: ETSI EN 300 745-1 V1.2.4 (1998-06) - Integrated Services Digital Network (ISDN); Message Waiting Indication (MWI) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1: Protocol specification

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 300 745-1 V1.2.4:2005
01-april-2005
'LJLWDOQRRPUHåMH]LQWHJULUDQLPLVWRULWYDPL,6'1'RSROQLOQDVWRULWHYLQGLNDFLMD
þDNDMRþHJDVSRURþLOD0:,3URWRNROGLJLWDOQHQDURþQLãNHVLJQDOL]DFLMHãW
'66GHO6SHFLILNDFLMDSURWRNROD
Integrated Services Digital Network (ISDN); Message Waiting Indication (MWI)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification
Ta slovenski standard je istoveten z: EN 300 745-1 Version 1.2.4
ICS:
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
SIST EN 300 745-1 V1.2.4:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 300 745-1 V1.2.4:2005

---------------------- Page: 2 ----------------------

SIST EN 300 745-1 V1.2.4:2005
EN 300 745-1 V1.2.4 (1998-06)
European Standard (Telecommunications series)
Integrated Services Digital Network (ISDN);
Message Waiting Indication (MWI) supplementary service;
Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification

---------------------- Page: 3 ----------------------

SIST EN 300 745-1 V1.2.4:2005
2 EN 300 745-1 V1.2.4 (1998-06)
Reference
REN/SPS-05145-W-1 (6wc90iqo.PDF)
Keywords
ISDN, MWI, DSS1, supplementary service
ETSI
Postal address
F-06921 Sophia Antipolis Cedex - FRANCE
Office address
650 Route des Lucioles - Sophia Antipolis
Valbonne - FRANCE
Tel.: [phone]  Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Internet
[e-mail]
http://www.etsi.fr
http://www.etsi.org
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1998.
All rights reserved.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 300 745-1 V1.2.4:2005
3 EN 300 745-1 V1.2.4 (1998-06)
Contents
Intellectual Property Rights.5
Foreword .5
1 Scope.7
2 Normative references .7
3 Definitions.8
4 Abbreviations.9
5 Description.9
6 Operational requirements.9
6.1 Provision and withdrawal. 9
6.2 Requirements on the receiving user's network side. 10
6.3 Requirements on the controlling user's network side . 10
7 Coding requirements .10
7.1 Coding of the facility information element components . 10
8 State definitions .12
9 Signalling procedures at the coincident S and T reference point .13
9.1 Activation at the controlling user's interface. 13
9.1.1 Normal operation . 13
9.1.2 Exceptional procedures . 13
9.2 Deactivation at the controlling user's interface . 14
9.2.1 Normal operation . 14
9.2.2 Exceptional procedures . 14
9.3 Activation at the receiving user's interface. 15
9.3.1 Normal operation . 15
9.3.2 Exceptional procedures . 15
9.4 Deactivation at the receiving user's interface. 16
9.4.1 Normal operation . 16
9.4.2 Exceptional procedures . 16
9.5 Invocation of the MWI to the receiving user . 16
9.5.1 Normal operation . 16
9.5.1.1 Invocation in the immediate mode. 16
9.5.1.2 Invocation in the deferred mode . 17
9.5.1.3 Invocation in the combined mode. 17
9.5.2 Exceptional procedures . 17
10 Procedures for interworking with private ISDNs .18
10.1 Activation of the message waiting indication where the controlling user resides in a private network. 18
10.1.1 Normal procedures. 18
10.1.2 Exceptional procedures . 18
10.2 Deactivation of the message waiting indication where the controlling user resides in a private network . 19
10.2.1 Normal procedures. 19
10.2.2 Exceptional procedures . 20
10.3 Activation of the message waiting indication where the receiving user resides in a private ISDN. 20
10.3.1 Normal operation . 20
10.3.2 Exceptional procedures . 21
10.4 Deactivation of the message waiting indication where the receiving user resides in a private ISDN . 22
10.4.1 Normal procedures. 22
10.4.2 Exceptional procedures . 22
ETSI

---------------------- Page: 5 ----------------------

SIST EN 300 745-1 V1.2.4:2005
4 EN 300 745-1 V1.2.4 (1998-06)
11 Interaction with other networks .23
12 Interaction with other supplementary services.23
13 Parameter values (timers).23
14 Dynamic description (SDL diagrams) .23
14.1 Controlling user . 24
14.1.1 Controlling user - user side . 24
14.1.1.1 Controlling user - user side (coincident S and T reference point) . 24
14.1.1.2 Controlling user - user side (T reference point). 26
14.1.2 Controlling user - network side . 28
14.1.2.1 Controlling user - network side (coincident S and T reference point) . 28
14.1.2.2 Controlling user - network side (T reference point). 30
14.2 Receiving user. 32
14.2.1 Receiving user - user side. 32
14.2.1.1 Receiving user - user side (coincident S and T reference point). 32
14.2.1.2 Receiving user - user side (T reference point) . 33
14.2.2 Receiving user - network side . 35
14.2.2.1 Receiving user - network side (coincident S and T reference point) . 35
14.2.2.2 Receiving user - network side (T reference point). 37
Annex A (informative): Signalling flows.39
Annex B (informative): Assignment of object identifier values.41
Annex C (informative): Changes with respect to the previous ETS 300 745-1 .42
History.43
ETSI

---------------------- Page: 6 ----------------------

SIST EN 300 745-1 V1.2.4:2005
5 EN 300 745-1 V1.2.4 (1998-06)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect
of ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (http://www.etsi.fr/ipr or http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)
which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Signalling
Protocols and Switching (SPS).
The present document is part 1 of a multi-part standard covering the Digital Subscriber Signalling System No. one
(DSS1) protocol specification for the Integrated Services Digital Network (ISDN) Message Waiting Indication (MWI)
supplementary service, as described below:
Part 1: "Protocol specification";
Part 2: "Protocol Implementation Conformance Statement (PICS) proforma specification";
Part 3: "Test Suite Structure and Test Purposes (TSS&TP) specification for the user";
Part 4: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)
proforma specification for the user";
Part 5: "Test Suite Structure and Test Purposes (TSS&TP) specification for the network";
Part 6: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)
proforma specification for the network".
In accordance with CCITT Recommendation I.130, the following three level structure is used to describe the
supplementary telecommunication services as provided by European public telecommunications operators under the
pan-European ISDN:
- Stage 1: is an overall service description, from the user's standpoint;
- Stage 2: identifies the functional capabilities and information flows needed to support the service described in
stage 1; and
- Stage 3: defines the signalling system protocols and switching functions needed to implement the service
described in stage 1.
The present document details the stage 3 aspects (signalling system protocols and switching functions) needed to
support the MWI supplementary service. The stage 1 aspects are detailed in ETS 300 650. The stage 2 aspects of the
MWI supplementary service have not been specified.
The present version updates the references to the basic call specifications.
ETSI

---------------------- Page: 7 ----------------------

SIST EN 300 745-1 V1.2.4:2005
6 EN 300 745-1 V1.2.4 (1998-06)
National transposition dates
Date of adoption of this EN: 19 June 1998
Date of latest announcement of this EN (doa): 30 September 1998
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 March 1999
Date of withdrawal of any conflicting National Standard (dow): 31 March 1999
ETSI

---------------------- Page: 8 ----------------------

SIST EN 300 745-1 V1.2.4:2005
7 EN 300 745-1 V1.2.4 (1998-06)
1 Scope
This first part of EN 300 745 specifies the stage three of the Message Waiting Indication (MWI) supplementary service
for the pan-European Integrated Services Digital Network (ISDN) as provided by European public telecommunications
operators at the T reference point or coincident S and T reference point (as defined in ITU-T Recommendation
I.411 [7]) by means of the Digital Subscriber Signalling System No. one (DSS1) protocol. Stage three identifies the
protocol procedures and switching functions needed to support a telecommunication service (see CCITT
Recommendation I.130 [5]).
In addition, the present document specifies the protocol requirements at the T reference point where the service is
provided to the user via an intermediate private ISDN.
The present document does not specify the additional protocol requirements where the service is provided to the user via
a telecommunication network that is not an ISDN but it does include interworking requirements of other networks with
the public ISDN.
The MWI supplementary service is provided independently of a call and is therefore applicable to a number of
telecommunication services.
Charging principles are outside the scope of the present document.
The MWI supplementary service enables the network, upon request of a controlling user to indicate to the receiving
user, that there is at least one message waiting.
NOTE: The MWI supplementary service is typically used between a mailbox service provider (controlling user)
and a user (receiving user) of the mailbox service provided .
Further parts of the present document specify the method of testing required to identify conformance to the present
document.
The present document is applicable to equipment supporting the MWI supplementary service, to be attached at either
side of a T reference point or coincident S and T reference point when used as an access to the public ISDN.
2 Normative references
References may be made to:
a) specific versions of publications (identified by date of publication, edition number, version number, etc.), in
which case, subsequent revisions to the referenced document do not apply; or
b) all versions up to and including the identified version (identified by "up to and including" before the version
identity); or
c) all versions subsequent to and including the identified version (identified by "onwards" following the version
identity); or
d) publications without mention of a specific version, in which case the latest version applies.
A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same
number.
[1] EN 300 195-1: "Integrated Services Digital Network (ISDN); Supplementary service interactions;
Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1: Protocol specification".
[2] EN 300 196-1: "Integrated Services Digital Network (ISDN); Generic functional protocol for the
support of supplementary services; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[3] ITU-T Recommendation E.164: "Numbering plan for the ISDN era".
[4] ITU-T Recommendation I.112: "Vocabulary of terms for ISDNs".
ETSI

---------------------- Page: 9 ----------------------

SIST EN 300 745-1 V1.2.4:2005
8 EN 300 745-1 V1.2.4 (1998-06)
[5] CCITT Recommendation I.130 (1988): "Method for the characterization of telecommunication
services supported by an ISDN and network capabilities of an ISDN".
[6] ITU-T Recommendation I.210: "Principles of telecommunication services supported by an ISDN
and the means to describe them".
[7] ITU-T Recommendation I.411 (1993): "ISDN user-network interfaces - Reference configurations".
[8] CCITT Recommendation Q.9 (1988): "Vocabulary of switching and signalling terms".
[9] CCITT Recommendation X.208 (1988): "Specification of Abstract Syntax Notation One
(ASN.1)".
[10] CCITT Recommendation X.219 (1988): "Remote Operations: Model, notation and service
definition".
[11] ITU-T Recommendation Z.100 (1993): "Specification and Description Language (SDL)".
3 Definitions
For the purposes of the present document, the following definitions apply:
basic access: See CCITT Recommendation Q.9 [8], definition 1551.
basic call procedures: The procedures by which a call (as an instance of a telecommunications service) is established
and terminated.
controlling user: The user that activates and deactivates the message waiting indication.
NOTE 1: The controlling user is likely to be a voice mail box.
Integrated Services Digital Network (ISDN): See ITU-T Recommendation I.112 [4], definition 308.
ISDN number: A number conforming to the numbering plan and structure specified in CCITT Recommendation
E.164 [3].
invoke component: See EN 300 196-1 [2], subclause 8.2.2.1. Where reference is made to a "xxxx" invoke component,
an invoke component is meant with its operation value set to the value of the operation "xxxx".
mail box: A system, inside or outside the public network infrastructure, capable to handle mail.
NOTE 2: The definition of the mail box service is outside the scope of the present document.
network: The DSS1 protocol entity at the network side of the user-network interface.
public network: The DSS1 protocol entity at the network side of the user-network interface at the T reference point.
primary rate access: See CCITT Recommendation Q.9 [8], definition 1552.
private network: The DSS1 protocol entity at the user side of the user-network interface at the T reference point.
receiving user: The user that receives the message waiting indication.
reject component: See EN 300 196-1 [2], subclause 8.2.2.4.
return error component: See EN 300 196-1 [2], subclause 8.2.2.3. Where reference is made to a "xxxx" return error
component, a return error component is meant which is related to a "xxxx" invoke component.
return result component: See EN 300 196-1 [2], subclause 8.2.2.2. Where reference is made to a "xxxx" return result
component, a return result component is meant which is related to a "xxxx" invoke component.
service; telecommunication service: See ITU-T Recommendation I.112 [4], definition 201.
supplementary service: See ITU-T Recommendation I.210 [6], subclause 2.4.
ETSI

---------------------- Page: 10 ----------------------

SIST EN 300 745-1 V1.2.4:2005
9 EN 300 745-1 V1.2.4 (1998-06)
user: The DSS1 protocol entity at the user side of the user-network interface.
4 Abbreviations
For the purposes of the present document, the following abbreviations apply:
ASN.1 Abstract Syntax Notation One
DSS1 Digital Subscriber Signalling System No. one
ISDN Integrated Services Digital Network
MWI Message Waiting Indication
SDL Specification and Description Language
5 Description
The MWI supplementary service shall be available to users who are connected to the network via a basic access or
primary rate access.
The MWI supplementary service enables the network, upon the request of a controlling user to indicate to the receiving
user, that there is at least one message waiting. The indication is delivered to the receiving user:
- when the MWI supplementary service is activated for a certain basic service and the receiving user makes an
outgoing call attempt; and/or
- as soon as the MWI supplementary service has been activated or deactivated.
NOTE: Having received this indication, the receiving user can subsequently access the mail box, to have the mail
delivered. The means by which the receiving user accesses and manages the mail box are outside the
scope of the present document.
The controlling user can activate and deactivate the message waiting indication when appropriate.
6 Operational requirements
6.1 Provision and withdrawal
The MWI supplementary service shall be provided to the controlling user after prior arrangements with the service
provider. The MWI supplementary service shall be withdrawn at the controlling user's request, or for administrative
reasons.
The MWI supplementary service shall be provided to the receiving user after prior arrangements with the service
provider. The MWI supplementary service shall be withdrawn at the receiving user's request, or for administrative
reasons. As a network option, the receiving user can have a subscription option to register the controlling user numbers
that can activate and deactivate the MWI supplementary service.
Table 1: Network options
Network options Values
Support of subscription option for registration of the ISDN - yes
number(s) of the controlling user(s) -no
Provide additional information during deferred invocation - yes
-no
Maximum number of controlling users' ISDN numbers any integer value
registered by the network
Maximum number of active instances per receiving user any integer value
The maximum number of ISDN numbers that can be registered for a receiving user is a network option.
ETSI

---------------------- Page: 11 ----------------------

SIST EN 300 745-1 V1.2.4:2005
10 EN 300 745-1 V1.2.4 (1998-06)
Provision of the MWI supplementary service shall be possible on an access or ISDN number basis.
In addition, the subscription options shown in table 2 shall be made available to the receiving user.
Table 2: Subscription options
Subscription options Values
Invocation mode a) deferred mode: invocation when the supplementary
service is activated and the receiving user makes
an outgoing call;
b) immediate mode: invocation as soon as the
supplementary service has been activated or
deactivated;
c) combined mode: in this case both the deferred and
immediate mode apply.
Override of invocation mode by controlling user allowed - yes
-no
Registration of the ISDN number(s) of the controlling - yes
user(s) -no
6.2 Requirements on the receiving user's network side
The network shall register whether the procedures of clause 9 or clause 10 of the present document shall apply.
6.3 Requirements on the controlling user's network side
The network shall register whether the procedures of clause 9 or clause 10 of the present document shall apply.
7 Coding requirements
7.1 Coding of the facility information element components
Table 3 shows the definitions of the operations and errors required for the MWI supplementary service using ASN.1 as
specified in CCITT Recommendation X.208 [9] and using the OPERATION and ERROR macros as defined in figure 4
of CCITT Recommendation X.219 [10].
The formal definition of the component types to encode these operations and errors is provided in clause D.1 of
EN 300 196-1 [2].
The inclusion of components in Facility information elements is defined in EN 300 196-1 [2], subclause 11.2.2.1.
All components (invoke, return result, return error and reject) shall be included within a Facility information element.
This Facility information element may be included in any appropriate message as specified in EN 300 196-1 [2],
subclause 8.3.1.1, unless a more restrictive specification is given in clause 9 of the present document.
ETSI

---------------------- Page: 12 ----------------------

SIST EN 300 745-1 V1.2.4:2005
11 EN 300 745-1 V1.2.4 (1998-06)
Table 3: Definition of operations and errors for the MWI supplementary service
MWI-Operations-and-Errors {ccitt identified-organization etsi(0) 745 operations-and-errors(1)}
DEFINITIONS EXPLICIT TAGS ::=
BEGIN
EXPORTS MWIActivate,
MWIDeactivate,
MWIIndicate,
InvalidReceivingUserNr,
ReceivingUserNotSubscribed,
ControllingUserNotRegistered,
MaxNumOfControllingUsersReached,
MaxNumOfActiveInstancesReached
;
IMPORTS OPERATION,
ERROR
FROM Remote-Operation-Notation
{joint-iso-ccitt remote-operations(4) notation(0)}
notSubscribed,
supplementaryServiceInteractionNotAllowed,
resourceUnavailable,
invalidServedUserNr
FROM General-Errors
{ccitt identified-organization etsi(0) 196 general-errors(2)}
BasicService
From Basic-Service-Elements
{ccitt identified-organization etsi(0) 196 basic-service-elements(8)}
PartyNumber
FROM Addressing-Data-Element
{ccitt identified-organization etsi(0) 196 addressing-data-elements(6)}
;
MWIActivate ::= OPERATION
ARGUMENT SEQUENCE {
receivingUserNr PartyNumber,
basicService BasicService,
controllingUserNr [1] PartyNumber OPTIONAL,
numberOfMessages [2] MessageCounter OPTIONAL,
controllingUserProvidedNr [3] PartyNumber OPTIONAL,
time [4] GeneralizedTime OPTIONAL,
messageId [5] MessageID OPTIONAL,
mode [6] InvocationMode OPTIONAL}
RESULT
ERRORS {
notSubscribed,
supplementaryServiceInteractionNotAllowed,
resourceUnavailable,
invalidReceivingUserNr,
invalidServedUserNr,
receivingUserNotSubscribed,
controllingUserNotRegistered,
indicationNotDelivered,
maxNumOfControllingUsersReached,
maxNumOfActiveInstancesReached }
-- End of MWIActivate operation definition
MWIDeactivate ::= OPERATION
ARGUMENT SEQUENCE {
receivingUserNr PartyNumber,
basicService BasicService,
controllingUserNr PartyNumber OPTIONAL,
mode InvocationMode OPTIONAL }
RESULT
ERRORS {
notSubscribed,
supplementaryServiceInteractionNotAllowed,
resourceUnavailable,
invalidReceivingUserNr,
invalidServedUserNr,
receivingUserNotSubscribed,
controllingUserNotRegistered,
indicationNotDelivered }
-- End of MWIDeactivate operation definition
ETSI

---------------------- Page: 13 ----------------------

SIST EN 300 745-1 V1.2.4:2005
12 EN 300 745-1 V1.2.4 (1998-06)
Table 3 (concluded): Definition of operations and errors for the MWI supplementary service
MWIIndicate ::= OPERATION
ARGUMENT SEQUENCE {
controllingUserNr [1] PartyNumber OPTIONAL,
basicService [2] BasicService OPTIONAL,
numberOfMessages [3] MessageCounter OPTIONAL,
controllingUserProvidedNr [4] PartyNumber OPTIONAL,
time [5] GeneralizedTime OPTIONAL,
messageId [6] MessageID OPTIONAL}
-- End of MWIIndicate operation definition
InvalidReceivingUserNr ::= ERROR
ReceivingUserNotSubscribed ::= ERROR
ControllingUserNotRegistered ::= ERROR
IndicationNotDelivered ::= ERROR
MaxNumOfControllingUsersReached ::= ERROR
MaxNumOfActiveInstancesReached ::= ERROR
MessageCounter ::= INTEGER (0.65535)
GeneralizedTime ::= [UNIVERSAL 24]
...