SIST EN 13169:2002/AC:2006
(Amendment)Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
TC - Numerous editorial updates throughout text
Wärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus Blähperlit (EPB) - Spezifikation
Produits isolants thermiques pour le bâtiment - Produits manufacturés en perlite expansée (EPB) - Spécification
Toplotnoizolacijski proizvodi za stavbe – Proizvodi iz ekspandiranega perlita (EPB) – Specifikacije
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - SpecificationToplotnoizolacijski proizvodi za stavbe – Proizvodi iz ekspandiranega perlita (EPB) – SpecifikacijeProduits isolants thermiques pour le bâtiment - Produits manufacturés en perlite expansée (EPB) - SpécificationWärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus Blähperlit (EPB) - Spezifikation91.100.60Thermal and sound insulating materialsICS:SIST EN 13169:2002/AC:2006en,deTa slovenski standard je istoveten z:EN 13169:2001/AC:200501-maj-2006SIST EN 13169:2002/AC:2006SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13169:2001/ACDecember 2005Décembre 2005Dezember 2005ICS 91.100.60English versionVersion FrançaiseDeutsche FassungThermal insulation products for buildings - Factory made products ofexpanded perlite (EPB) - SpecificationProduits isolants thermiques pour lebâtiment - Produits manufacturés en perliteexpansée (EPB) - SpécificationWärmedämmstoffe für Gebäude -Werkmäßig hergestellte Produkte ausBlähperlit (EPB) - SpezifikationThis corrigendum becomes effective on 21 December 2005 for incorporation in the three officiallanguage versions of the EN.Ce corrigendum prendra effet le 21 décembre 2005 pour incorporation dans les trois versionslinguistiques officielles de la EN.Die Berichtigung tritt am 21.Dezember 2005 zur Einarbeitung in die drei offiziellen Sprachfassungender EN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier auxmembres nationaux du CEN.Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedernvon CEN vorbehalten.Ref. No.:EN 13169:2001/AC:2005 D/E/F
EN 13169:2001/AC:2005 (E/F/D) 2 English version 3.2 Symbol dL The Symbol dL contained Pa when it should have contained kPa. Replace the definition of dL in 3.2 by the following:
dL
is the thickness under a load of 250 kPa 4.2.1 Thermal resistance and thermal conductivity In 4.2.1 Thermal resistance and thermal conductivity the text, the thermal resistance, RD, shall always be declared. The thermal conductivity, λD, shall be declared where possible; is replaced by: for products of uniform thickness, the thermal resistance, RD, shall always be declared. The thermal conductivity, λD, shall be declared where possible. Where appropriate, for products of non-uniform thickness (i.e. for sloped and tapered products) only the thermal conductivity, λD, shall be declared. 4.3.6.2
Table 4 The requirement given in table 4 contained % when it should have contained k
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.