SIST EN 13511:2004
(Main)Footwear - Test methods for uppers - Resistance to damage on lasting
Footwear - Test methods for uppers - Resistance to damage on lasting
This European Standard specifies a test method to determine the lastability of uppers or complete upper assembly irrespective of the material in order to assess the suitability for the end use.
Schuhe - Prüfverfahren für Obermaterialien - Aufzwickbarkeit
Diese Europäische Norm legt ein Prüfverfahren zur Bestimmung der Aufzwickbarkeit von Obermaterialien oder
vollständigem Schuhwerk unabhängig vom Werkstoff fest, um die Gebrauchseigenschaften im fertigen Zustand
zu bestimmen.
Chaussures - Méthodes d'essai des tiges - Aptitude au montage
La présente Norme européenne spécifie une méthode d'essai permettant de déterminer l'aptitude au montage des tiges ou assemblage complet de la tige, quel que soit le matériau qui les compose afin d'évaluer si elles conviennent a l'utilisation finale.
Footwear - Test methods for uppers - Resistance to damage on lasting
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Footwear - Test methods for uppers - Resistance to damage on lastingSchuhe - Prüfverfahren für Obermaterialien - AufzwickbarkeitChaussures - Méthodes d'essai des tiges - Aptitude au montageFootwear - Test methods for uppers - Resistance to damage on lasting61.060ObuvalaFootwearICS:Ta slovenski standard je istoveten z:EN 13511:2001SIST EN 13511:2004en01-januar-2004SIST EN 13511:2004SLOVENSKI
STANDARD
SIST EN 13511:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13511November 2001ICS 61.060English versionFootwear - Test methods for uppers - Resistance to damage onlastingChaussures - Méthodes d'essai des tiges - Aptitude aumontageSchuhe - Prüfverfahren für Schäfte - AufzwickbarkeitThis European Standard was approved by CEN on 3 October 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13511:2001 ESIST EN 13511:2004
EN 13511:2001 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Apparatus and material.45Sampling and conditioning.66Test method.76.1Principle.76.2Procedure.77Expression of results.88Test report.8SIST EN 13511:2004
EN 13511:2001 (E)3ForewordThis European Standard has been prepared by Technical Committee CEN/TC 309 "Footwear", the secretariat ofwhich is held by AENOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by May 2002, and conflicting national standards shall be withdrawn at the latest byMay 2002.This draft European Standard is based on the IUP 9 method (ISO 3379:1976 "Leather - Determination of distensionand strength of grain - Ball burst test").According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,Switzerland and the United Kingdom.SIST EN 13511:2004
EN 13511:2001 (E)41 ScopeThis European Standard specifies a test method to determine the lastability of uppers or complete upper assemblyirrespective of the material in order to assess the suitability for the end use.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 12222, Footwear - Standard atmospheres for conditioning and testing of footwear and components forfootwear.prEN ISO 2418, Leather - Chemical, physical, mechanical and fastness tests – Sampling.3 Terms and definitionsFor the purposes of this European Standard, the following terms and definitions apply.3.1resistance to damage on lastingability of a material to be stretched simultaneously in all directions (distended) without being damaged3.2uppermaterials forming the outer face of the footwear which is attached to the sole assembly and covers the upper dorsalsurface of the foot. In the case of boots this also includes the outer face of the material covering the leg. Only thematerials that are visible are included, no account should be taken of underlying materials3.3complete upper assemblyfinished upper, fully seamed, joined or laminated together as appropriate, comprising the centre material and anylining(s) together with all components such as interlinings, adhesives, membranes, foams or reinforcements, butexcluding toe puffs and stiffenersNOTEThe complete upper assembly can be flat, 2- dimensional or comprise lasted upper in the final footwear.4 Apparatus and materialThe following apparatus and material shall be used:4.1Test machine (see Figures 1 and 2), including the following:4.1.1Mean
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.