SIST EN 300 175-6 V1.5.1:2003

Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 6: Identities and addressing

Maintenance update.

Digitalne izboljšane brezvrvične telekomunikacije (DECT) – Skupni vmesnik (CI) – 6. del: Identitete in naslavljanje

General Information

• Status: Published
• Publication Date: 30-Nov-2003
• ICS: 33.070.30 - Digital Enhanced Cordless Telecommunications (DECT)
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2003
• Due Date: 01-Dec-2003
• Completion Date: 01-Dec-2003
• Ref Project: ETSI EN 300 175-6 V1.5.1 (2001-02) - Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 6: Identities and addressing

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 300 175-6 V1.5.1:2003
01-december-2003
'LJLWDOQHL]EROMãDQHEUH]YUYLþQHWHOHNRPXQLNDFLMH'(&7±6NXSQLYPHVQLN&,±
GHO,GHQWLWHWHLQQDVODYOMDQMH
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 6:
Identities and addressing
Ta slovenski standard je istoveten z: EN 300 175-6 Version 1.5.1
ICS:
33.070.30 'LJLWDOQHL]EROMãDQH Digital Enhanced Cordless
EUH]YUYLþQHWHOHNRPXQLNDFLMH Telecommunications (DECT)
'(&7
SIST EN 300 175-6 V1.5.1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 300 175-6 V1.5.1:2003

---------------------- Page: 2 ----------------------

SIST EN 300 175-6 V1.5.1:2003
ETSI EN 300 175-6 V1.5.1 (2001-02)
European Standard (Telecommunications series)
Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI);
Part 6: Identities and addressing

---------------------- Page: 3 ----------------------

SIST EN 300 175-6 V1.5.1:2003
2 ETSI EN 300 175-6 V1.5.1 (2001-02)
Reference
REN/DECT-000157-6
Keywords
DECT, radio
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: [phone] Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/
If you find errors in the present document, send your comment to:
[e-mail]
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2001.
All rights reserved.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 300 175-6 V1.5.1:2003
3 ETSI EN 300 175-6 V1.5.1 (2001-02)
Contents
Intellectual Property Rights .5
Foreword.5
1 Scope.6
2 References.7
3 Definitions and abbreviations.7
3.1 Definitions . 7
3.2 Abbreviations. 10
4 General description of FP and PP identities.10
4.1 Combinations of ARIs, PARKs and IPUIs . 11
5 FP identities.12
5.1 ARI class A. 15
5.2 ARI class B. 15
5.3 ARI class C. 16
5.4 ARI class D. 17
5.5 ARl class E . 18
5.6 SARI list structure. 19
5.6.1 ARI list length . 19
5.6.2 TARIs. 19
5.6.3 Black . 19
5.6.4 ARI . 20
5.6.5 Black-ARI . 20
5.6.6 TARI messages. 20
5.6.6.1 Request message from the PP. 20
5.6.6.2 Response message from the FP . 21
6 PP identities.22
6.1 PARK . 23
6.1.1 PARK A . 23
6.1.2 PARK B . 23
6.1.3 PARK C . 23
6.1.4 PARK D . 23
6.1.5 PARK E. 24
6.2 IPUI. 24
6.2.1 Portable user identity type N (residential/default). 24
6.2.2 Portable user identity type S (PSTN/ISDN) . 24
6.2.3 Portable user identity type O (private) . 25
6.2.4 Portable user identity type T (private extended) . 25
6.2.5 Portable user identity type P (public/public access service) . 25
6.2.6 Portable user identity type Q (public/general) . 26
6.2.7 Portable user identity type U (public/general) . 26
6.2.8 Portable user identity type R (public/IMSI). 26
6.3 Individual and group TPUIs. 26
6.3.1 General. 26
6.3.2 Individual TPUI. 28
6.3.3 Group TPUIs . 28
7 Coding of identities.29
7.1 RFPI E-bit. 29
7.2 Access rights codes . 30
7.3 Portable user identity types. 30
7.4 EMC, EIC and POC . 30
8 Rules for the usage of FP and PP identities.30
8.1 General principles . 30
ETSI

---------------------- Page: 5 ----------------------

SIST EN 300 175-6 V1.5.1:2003
4 ETSI EN 300 175-6 V1.5.1 (2001-02)
8.2 PARI, SARI and TARI usage . 31
9 Connection related identities .32
9.1 MAC identities. 32
9.1.1 FMID . 33
9.1.2 PMID . 33
9.2 DLC identities. 33
9.3 NWK identities . 34
10 Equipment related identities.34
11 Subscription and registration procedures .34
Annex A (informative): Examples of usage of FP and PP identities.35
A.1 Residential ID usage.35
A.2 Public ID usage .35
A.2.1 Primary. 35
A.2.2 Secondary . 36
A.2.3 Tertiary. 36
A.3 Private ID usage .37
A.3.1 Primary. 37
A.3.2 Secondary . 37
A.4 Mixed private and public ID usage.37
A.4.1 Public in private environments. 37
A.4.2 Private in public environments. 38
A.5 PARI and SARI use for CTM roaming.38
Annex B (normative): Identities and addressing timers.40
Annex C (normative): Representation of IPEI as printed text.41
History .42
ETSI

---------------------- Page: 6 ----------------------

SIST EN 300 175-6 V1.5.1:2003
5 ETSI EN 300 175-6 V1.5.1 (2001-02)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Project Digital Enhanced Cordless
Telecommunications (DECT).
The present document is part 6 of a multi-part EN covering the Common Interface (CI) for the Digital Enhanced
Cordless Telecommunications (DECT), as identified below:
Part 1: "Overview";
Part 2: "Physical layer (PHL)";
Part 3: "Medium Access Control (MAC) layer";
Part 4: "Data Link Control (DLC) layer";
Part 5: "Network (NWK) layer";
Part 6: "Identities and addressing";
Part 7: "Security features";
Part 8: "Speech coding and transmission".
Further details of the DECT system may be found in TR 101 178 [11] and ETR 043 [12].
National transposition dates
Date of adoption of this EN: 16 February 2001
Date of latest announcement of this EN (doa): 31 May 2001
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 November 2001
Date of withdrawal of any conflicting National Standard (dow): 30 November 2001
ETSI

---------------------- Page: 7 ----------------------

SIST EN 300 175-6 V1.5.1:2003
6 ETSI EN 300 175-6 V1.5.1 (2001-02)
1 Scope
The present document gives an introduction and overview of the complete Digital Enhanced Cordless
Telecommunications (DECT) Common Interface (CI).
This part of the DECT CI specifies the identities and addressing structure of the Digital Enhanced Cordless
Telecommunications (DECT) Common Interface.
There are four categories of identities to be used for identification and addressing in a general DECT environment.
These four categories are:
- Fixed Part (FP) identities;
- Portable Part (PP) identities;
- connection-related identities;
- equipment-related identities.
Fixed part identities and portable part identities are used for:
- access information from fixed parts to portable parts;
- access requests from portable parts;
- identification of portable parts;
- identification of fixed parts and radio fixed parts;
- paging;
- billing.
These identities support:
- different environments, such as residential, public or private;
- supply to manufacturers, installers, and operators of globally unique identity elements with a minimum of central
administration;
- multiple access rights for the same portable;
- large freedom for manufacturers, installers, and operators to structure the fixed part identities, e.g. to facilitate
provision of access rights to groups of DECT systems;
- roaming agreements between DECT networks run by the same or different owners/operators;
- indication of handover domains;
- indication of location areas, i.e. paging area;
- indication of subscription areas of a public service.
The present document also provides for length indicators and other messages that can override the default location
and/or paging area and domain indications given by the structure of the identities.
Connection related identities are used to identify the protocol instances associated with a call and are used for
peer-to-peer communication.
Equipment related identities are used to identify a stolen PP and to derive a default identity coding for PP emergency
call set-up.
Coding of identity information elements for higher layer messages is found in EN 300 175-5 [5], clause 7.7.
ETSI

---------------------- Page: 8 ----------------------

SIST EN 300 175-6 V1.5.1:2003
7 ETSI EN 300 175-6 V1.5.1 (2001-02)
User authentication and ciphering need additional key information and is outside the scope of the present document, but
is covered in other parts of EN 300 175 parts 1 to 8 [1] to [7], e.g. part 7.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
[1] ETSI EN 300 175-1: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 1: Overview".
[2] ETSI EN 300 175-2: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 2: Physical Layer (PHL)".
[3] ETSI EN 300 175-3: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 3: Medium Access Control (MAC) layer".
[4] ETSI EN 300 175-4: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 4: Data Link Control (DLC) layer".
[5] ETSI EN 300 175-5: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 5: Network (NWK) layer".
[6] ETSI EN 300 175-7: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 7: Security features".
[7] ETSI EN 300 175-8: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 8: Speech coding and transmission".
[8] ITU-T Recommendation E.164 (1988): "The international public telecommunication numbering
plan".
[9] ETSI EN 300 523: "Digital cellular telecommunications system (Phase 2); Numbering, addressing
and identification (GSM 03.03 version 4.11.1)".
[10] ITU-T Recommendation E.212 (1993): "The international identification plan for mobile terminals
and mobile users".
[11] ETSI TR 101 178: "Digital Enhanced Cordless Telecommunications (DECT); A High Level Guide
to the DECT Standardization".
[12] ETSI ETR 043: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface
(CI); Services and facilities requirements specification".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
Access Rights Class (ARC): see EN 300 175-1 [1]
Access Rights Details (ARD): see EN 300 175-1 [1]
ETSI

---------------------- Page: 9 ----------------------

SIST EN 300 175-6 V1.5.1:2003
8 ETSI EN 300 175-6 V1.5.1 (2001-02)
Access Rights Identity (ARI): see EN 300 175-1 [1]
attach: see EN 300 175-1 [1]
authentication (of a subscriber): see EN 300 175-1 [1]
bearer: see EN 300 175-1 [1]
bearer handover: see EN 300 175-1 [1]
cell: see EN 300 175-1 [1]
Central Control Fixed Part (CCFP): see EN 300 175-1 [1]
cluster: see EN 300 175-1 [1]
connection: see EN 300 175-1 [1]
connection handover: see EN 300 175-1 [1]
Cordless Radio Fixed Part (CRFP): see EN 300 175-1 [1]
coverage area: see EN 300 175-1 [1]
DECT Network (DNW): see EN 300 175-1 [1]
Data Link Control (DLC): see EN 300 175-1 [1]
external handover: see EN 300 175-1 [1]
Fixed Part (DECT Fixed Part) (FP): see EN 300 175-1 [1]
Fixed Radio Termination (FT): see EN 300 175-1 [1]
frame: see EN 300 175-1 [1]
Generic Access Profile (GAP): see EN 300 175-1 [1]
geographically unique: see EN 300 175-1 [1]
Global Network (GNW): see EN 300 175-1 [1]
globally unique identity: see EN 300 175-1 [1]
handover: see EN 300 175-1 [1]
intercell handover: see EN 300 175-1 [1]
internal handover: see EN 300 175-1 [1]
International Portable User Identity (IPUI): see EN 300 175-1 [1]
interoperability: see EN 300 175-1 [1]
interoperator roaming: see EN 300 175-1 [1]
intracell handover: see EN 300 175-1 [1]
intraoperator roaming: see EN 300 175-1 [1]
Local Network (LNW): see EN 300 175-1 [1]
locally unique identity: see EN 300 175-1 [1]
location area: see EN 300 175-1 [1]
location registration: see EN 300 175-1 [1]
Medium Access Control (MAC): see EN 300 175-1 [1]
ETSI

---------------------- Page: 10 ----------------------

SIST EN 300 175-6 V1.5.1:2003
9 ETSI EN 300 175-6 V1.5.1 (2001-02)
multiframe: see EN 300 175-1 [1]
network (telecommunication network): see EN 300 175-1 [1]
operator (DECT operator): see EN 300 175-1 [1]
paging: see EN 300 175-1 [1]
paging area: see EN 300 175-1 [1]
PARK Length Indicator (PLI): see EN 300 175-1 [1]
Physical (PHL): see EN 300 175-1 [1]
Primary Access Rights Identity (PARI): see EN 300 175-1 [1]
Portable Access Rights Key (PARK): see EN 300 175-1 [1]
Portable Handset (PHS): see EN 300 175-1 [1]
Portable Part (DECT Portable Part) (PP): see EN 300 175-1 [1]
Portable radio Termination (PT): see EN 300 175-1 [1]
Portable User Number (PUN): see EN 300 175-1 [1]
Portable User Type (PUT): see EN 300 175-1 [1]
private: see EN 300 175-1 [1]
public: see EN 300 175-1 [1]
public access service: see EN 300 175-1 [1]
radio end point: see EN 300 175-1 [1]
Radio Fixed Part (RFP): see EN 300 175-1 [1]
Radio Fixed Part Identity (RFPI): see EN 300 175-1 [1]
registration: see EN 300 175-1 [1]
Repeater Part (REP): see EN 300 175-1 [1]
roaming: see EN 300 175-1 [1]
roaming service: see EN 300 175-1 [1]
Secondary Access Rights Identity (SARI): see EN 300 175-1 [1]
service provider (telecommunications service provider): see EN 300 175-1 [1]
Single Radio Fixed Part (SRFP): see EN 300 175-1 [1]
subscriber (customer): see EN 300 175-1 [1]
subscription registration: see EN 300 175-1 [1]
Tertiary Access Rights Identity (TARI): see EN 300 175-1 [1]
TDMA frame: see EN 300 175-1 [1]
TPUI domain: see EN 300 175-1 [1]
user (of a telecommunication network): see EN 300 175-1 [1]
Wireless Relay Station (WRS): see EN 300 175-1 [1]
ETSI

---------------------- Page: 11 ----------------------

SIST EN 300 175-6 V1.5.1:2003
10 ETSI EN 300 175-6 V1.5.1 (2001-02)
3.2 Abbreviations
For the purposes of the present document the following abbreviations apply:
ARC Access Rights Class
ARD Access Rights Details
ARI Access Rights Identity
BCD Binary Coded Decimal
CCFP Central Control Fixed Part
CBI Collective Broadcast Identifier
CI Common Interface
CRFP Cordless Radio Fixed Part
DECT Digital Enhanced Cordless Telecommunications
DLC Data Link Control
DNW DECT Network
FMID Fixed Part MAC Identity
FP Fixed Part
FT Fixed radio Termination
GNW Global Network
IPEI International Portable Equipment Identity
IPUI International Portable User Identity
ISDN Integrated Services Digital Network
LAL Location Area Level
LNW Local Network
MAC Medium Access Control.
NWK Network
PABX Private Automatic Branch Exchange
PARI Primary Access Rights Identity
PARK Portable Access Rights Key
PARK{y} PARK with value y for its park length indicator
PBX Private Branch Exchange
PHL Physical Layer
PHS Portable Handset
PLI ParkLengthIndicator
PMID Portable Part MAC Identity
PP Portable Part
PSTN Public Switched Telephone Network
PT Portable radio Termination
PUN Portable User Number
PUT Portable User Type
REP Repeater Part
RFP Radio Fixed Part
RFPI Radio Fixed Part Identity
RPN Radio fixed Part Number
SARI Secondary Access Rights Identity
TARI Tertiary Access Rights Identity
TDMA Time Division Multiple Access
TPUI Temporary Portable User Identity
4 General description of FP and PP identities
Every radio FP broadcasts for its purpose a unique identity which contains a globally unique (to a service provider)
Access Rights Identity (ARI). Every PP has both a Portable Access Rights Key (PARK) and an International Portable
User Identity (IPUI). These operate as a pair. A PP is allowed to access any radio FP which broadcasts an ARI that can
be identified by any of the portable access rights keys of that PP.
The IPUI is used to identify the portable in the domain defined by its related ARI. The IPUI can either be locally unique
or globally unique.
The following figure illustrates the identity structure.
ETSI

---------------------- Page: 12 ----------------------

SIST EN 300 175-6 V1.5.1:2003
11 ETSI EN 300 175-6 V1.5.1 (2001-02)
Portable Portable
Access Rights Class Access Rights Details
User User
ARC ARD
Type Number
PUT PUN
Radio
Access Rights Identity
ARI Fixed
Part
Tertiary
Primary Secondary Number
PARI
PARI PARI RPN
Portable
International
Access
Portable
Rights Key
Radio Fixed Part Identity User Identity
PARK
RFPI
IPUI
FP Identities PP Identities
Figure 4.1: General identity structure
The common base for the DECT identity structure is the Access Rights Class (ARC) and Access Rights Details (ARD).
These need to be known by both the FP and the PPs. In the FP the ARC and ARD are called Access Rights Identity
(ARI), and in the PP they are called Portable Access Rights Key (PARK). The distinction between PARK and ARI is
that each PARK can have a group of ARDs allocated, PARK{y}. "y" is the value of the PARK length indicator given in
the PP subscription process.
ARD
ARC
"don't care" bits
ybits
Figure 4.2: Structure of PARK{y}
If the ARI is a primary ARI, i.e. PARI, it will form, together with a RFP number, the broadcast identity RFPI. ARIs can
also be less frequently broadcast as Secondary Access Rights Identities (SARIs) and may also be available as Tertiary
Access Rights Identities (TARIs), which are not broadcast, but are accessible upon request.
The PUT and PUN form the PP user's identity, IPUI. This identity can either be globally unique or locally unique. In
addition to IPUIs, shorter temporary identities, TPUIs, may be used for paging.
A PP is identified by its pairs of PARK{y} and IPUI. A PP is only allowed to access a FP if one of its PARKs includes
oneoftheARIs oftheFP, i.e. thePARI, aSARI or aTARI.
4.1 Combinations of ARIs, PARKs and IPUIs
DECT provides a flexible radio access technology for a large variety of private and public networks or systems. This
leads to different requirements on e.g. sub-system grouping, distribution and installation of equipment, identity
allocations and subscription.
Therefore five access rights classes A - E and a number of IPUIs have been defined to meet the need for a
differentiation in the identity structures.
The following table gives an overview of likely combinations of the main identities. As described in clause 6.2 some
flexibility is allowed in combinations of the IPUI types, e.g. IPUI type N could be used by a service provider in
combination with any ARC.
ETSI

---------------------- Page: 13 ----------------------

SIST EN 300 175-6 V1.5.1:2003
12 ETSI EN 300 175-6 V1.5.1 (2001-02)
Table 4.1: Combinations of identities ARI, PARK and IPUI
ARI Environment SARI/ PARK IPUI
class TARI class type
A Residential and private No A N,S
(PBX) single- and small
multiple cell systems
BPrivate Yes B O,S,T
(PABXs) multiple cell
C Public single- and multiple Yes C P,Q,R,S
cell systems
D Public DECT access to a Yes D R
GSM operator network
EPPtoPPdirect Yes E N
communication (private)
5 FP identities
FP identities are used to inform PPs about the identity of a DECT FP and the access rights to that DECT FP and thereby
reduce the number of access attempts from unauthorized portables.
A DECT FP broadcasts this information on the N -channel via all its radio FPs, at least once per multiframe. A PP
T
needs to be able to interpret necessary parts of this broadcast information to detect the access rights to a system or even
acc
...