SIST ISO 9972:2012/A1:2012
(Amendment)Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization method - Amendment 1
Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization method - Amendment 1
This International Standard is intended for the measurement of the air permeability of buildings or parts of buildings in the field. It specifies the use of mechanical pressurization or depressurization of a building or part of a building. It describes the measurement of the resulting air flow rates over a range of indoor-outdoor static pressure differences. This International Standard is intended for the measurement of the air leakage of building envelopes of single-zone buildings. For the purpose of this International Standard, many multi-zone buildings can be treated as single-zone buildings by opening interior doors or by inducing equal pressures in adjacent zones.
It does not address evaluation of air permeability through individual components.
Performance thermique des bâtiments - Détermination de la perméabilité à l'air des bâtiments - Méthode de pressurisation par ventilateur - Amendement 1
Toplotne značilnosti stavb - Ugotavljanje tesnosti obodnih konstrukcij - Metoda tlačne razlike z uporabo ventilatorja - Dopolnilo 1
Ta mednarodni standard je namenjen merjenju tesnosti obodnih konstrukcij ali delov obodnih konstrukcij na tem področju. Določa uporabo mehanskega ustvarjanja nadtlaka ali podtlaka obodnih konstrukcij ali delov obodnih konstrukcij. Opisuje merjenje pretoka zraka prek niza razlik v zunanjem in notranjem statičnem tlaku.
Ta mednarodni standard je namenjen merjenju puščanja zraka fasad obodnih konstrukcij pri enoconskih obodnih konstrukcijah. Za namen tega mednarodnega standarda se lahko številne večconske obodne konstrukcije obravnava kot enoconske obodne konstrukcije z odprtjem notranjih vrat ali z vzpostavitvijo enakega tlaka v sosednjih conah. Ne obravnava vrednotenja tesnosti prek posameznih sestavnih delov.
General Information
Relations
Buy Standard
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 9972
Second edition
2006-05-01
AMENDMENT 1
2009-03-01
Thermal performance of buildings —
Determination of air permeability of
buildings — Fan pressurization method
AMENDMENT 1
Performance thermique des bâtiments — Détermination de la
perméabilité à l'air des bâtiments — Méthode de pressurisation par
ventilateur
AMENDEMENT 1
Reference number
ISO 9972:2006/Amd.1:2009(E)
©
ISO 2009
---------------------- Page: 1 ----------------------
ISO 9972:2006/Amd.1:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2009 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 9972:2006/Amd.1:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all mat
...
SLOVENSKI STANDARD
SIST ISO 9972:2012/A1:2012
01-februar-2012
7RSORWQH]QDþLOQRVWLVWDYE8JRWDYOMDQMHWHVQRVWLRERGQLKNRQVWUXNFLM0HWRGD
WODþQHUD]OLNH]XSRUDERYHQWLODWRUMD'RSROQLOR
Thermal performance of buildings - Determination of air permeability of buildings - Fan
pressurization method - Amendment 1
Performance thermique des bâtiments - Détermination de la perméabilité à l'air des
bâtiments - Méthode de pressurisation par ventilateur - Amendement 1
Ta slovenski standard je istoveten z: ISO 9972:2006/Amd 1:2009
ICS:
91.120.10 Toplotna izolacija stavb Thermal insulation
SIST ISO 9972:2012/A1:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ISO 9972:2012/A1:2012
---------------------- Page: 2 ----------------------
SIST ISO 9972:2012/A1:2012
INTERNATIONAL ISO
STANDARD 9972
Second edition
2006-05-01
AMENDMENT 1
2009-03-01
Thermal performance of buildings —
Determination of air permeability of
buildings — Fan pressurization method
AMENDMENT 1
Performance thermique des bâtiments — Détermination de la
perméabilité à l'air des bâtiments — Méthode de pressurisation par
ventilateur
AMENDEMENT 1
Reference number
ISO 9972:2006/Amd.1:2009(E)
©
ISO 2009
---------------------- Page: 3 ----------------------
SIST ISO 9972:2012/A1:2012
ISO 9972:2006/Amd.1:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2009 – All rights reserved
---------------------- Page: 4 ----------------------
SIST ISO 9972:2012/A1:2012
ISO 9972:2006/Amd.1:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standar
...
SLOVENSKI STANDARD
SIST ISO 9972:2010/oAmd 1:2010
01-junij-2010
7RSORWQH]QDþLOQRVWLVWDYE8JRWDYOMDQMHWHVQRVWLRERGQLKNRQVWUXNFLM0HWRGD
WODþQHUD]OLNH]XSRUDERYHQWLODWRUMD'RGDWHN
Thermal performance of buildings - Determination of air permeability of buildings - Fan
pressurization method - Amendment 1
Performance thermique des bâtiments - Détermination de la perméabilité à l'air des
bâtiments - Méthode de pressurisation par ventilateur - Amendement 1
Ta slovenski standard je istoveten z: ISO 9972:2006/Amd 1:2009
ICS:
91.120.10 Toplotna izolacija stavb Thermal insulation
SIST ISO 9972:2010/oAmd 1:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ISO 9972:2010/oAmd 1:2010
---------------------- Page: 2 ----------------------
SIST ISO 9972:2010/oAmd 1:2010
INTERNATIONAL ISO
STANDARD 9972
Second edition
2006-05-01
AMENDMENT 1
2009-03-01
Thermal performance of buildings —
Determination of air permeability of
buildings — Fan pressurization method
AMENDMENT 1
Performance thermique des bâtiments — Détermination de la
perméabilité à l'air des bâtiments — Méthode de pressurisation par
ventilateur
AMENDEMENT 1
Reference number
ISO 9972:2006/Amd.1:2009(E)
©
ISO 2009
---------------------- Page: 3 ----------------------
SIST ISO 9972:2010/oAmd 1:2010
ISO 9972:2006/Amd.1:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2009 – All rights reserved
---------------------- Page: 4 ----------------------
SIST ISO 9972:2010/oAmd 1:2010
ISO 9972:2006/Amd.1:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national sta
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.