SIST EN 60512-7-2:2012

Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free components) - Test 7b: Mechanical strength impact

This part of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this standard is to detail a standard test method to assess the ability of a free connector on the end of a cable or wire bundle to withstand impacts it could receive when dropped onto a hard surface.

Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 7-2: Aufprallprüfungen (freie Steckverbinder) - Prüfung 7b: Kabelgebundene Fallprüfung

Connecteurs pour équipements électroniques - Essai et mesures - Partie 7-2: Essais d'impact (fiches) - Essai 7b: Résistance mécanique aux chocs

La CEI 60512-7-2:2011 Lorsque la spécification particulière l'exige, la présente partie de la CEI 60512 est utilisée pour les essais des connecteurs qui entrent dans le domaine d'application du comité d'études 48 de la CEI. Ces essais peuvent aussi être utilisés sur des composants similaires lorsqu'une spécification particulière le précise. L'objet de la présente norme est de définir une méthode d'essai normalisée pour évaluer l'aptitude d'une fiche située à l'extrémité d'un câble ou d'un faisceau de fils, à résister aux chocs qu'elle pourrait recevoir en tombant sur une surface dure.

Konektorji za elektronsko opremo - Preskusi in meritve - 7-2. del: Udarni preskusi (prosti konektorji) - Preskus 7b: Vpliv na mehansko trdnost

Ta del standarda IEC 60512 se uporablja, če tako zahteva podrobna specifikacija, za preskušanje konektorjev na področju uporabe tehničnega odbora 48. Lahko se uporablja tudi za podobne elemente, če je tako določeno v podrobni specifikaciji. Cilj tega standarda je podrobno opisati standardno preskusno metodo za ocenjevanje zmožnosti prostega konektorja na koncu snopa kablov ali žic, da vzdrži udarce, ki jih lahko prejme pri spustu na trdo površino.

General Information

• Status: Published
• Publication Date: 22-Mar-2012
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 20-Mar-2012
• Due Date: 25-May-2012
• Completion Date: 23-Mar-2012
• Ref Project: EN 60512-7-2:2012 - Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60512-7-2:2012
01-maj-2012
Konektorji za elektronsko opremo - Preskusi in meritve - 7-2. del: Udarni preskusi
(prosti konektorji) - Preskus 7b: Vpliv na mehansko trdnost
Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests
(free components) - Test 7b: Mechanical strength impact
Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 7-2:
Aufprallprüfungen (freie Steckverbinder) - Prüfung 7b: Kabelgebundene Fallprüfung
Connecteurs pour équipements électroniques - Essai et mesures - Partie 7-2: Essais
d'impact (fiches) - Essai 7b: Résistance mécanique aux chocs
Ta slovenski standard je istoveten z: EN 60512-7-2:2012
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
SIST EN 60512-7-2:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60512-7-2:2012

---------------------- Page: 2 ----------------------

SIST EN 60512-7-2:2012

EUROPEAN STANDARD
EN 60512-7-2

NORME EUROPÉENNE
February 2012
EUROPÄISCHE NORM

ICS 31.220.01; 31.220.10


English version


Connectors for electronic equipment -
Tests and measurements -
Part 7-2: Impact tests (free connectors) -
Test 7b: Mechanical strength impact
(IEC 60512-7-2:2011)


Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Einrichtungen -
Essais et mesures - Mess- und Prüfverfahren -
Partie 7-2: Essais d'impact (fiches) - Teil 7-2: Aufprallprüfungen (freie
Essai 7b: Résistance mécanique aux Steckverbinder) -
chocs Prüfung 7b: Kabelgebundene Fallprüfung
(CEI 60512-7-2:2011) (IEC 60512-7-2:2011)





This European Standard was approved by CENELEC on 2011-12-22. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60512-7-2:2012 E

---------------------- Page: 3 ----------------------

SIST EN 60512-7-2:2012
EN 60512-7-2:2012 - 2 -
Foreword
The text of document 48B/2258/FDIS, future edition 1 of IEC 60512-7-2, prepared by SC 48B,
"Connectors", of IEC TC 48, "Electromechanical components and mechanical structures for electronic
equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 60512-7-2:2012.

The following dates are fixed:
(dop) 2012-09-22
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2014-12-22

standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

Endorsement notice
The text of the International Standard IEC 60512-7-2:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068-2-31:2008 NOTE  Harmonized as EN 60068-2-31:2008 (not modified).
IEC 60512-1 NOTE  Harmonized as EN 60512-1.
IEC 60512-1-100 NOTE  Harmonized as EN 60512-1-100.

---------------------- Page: 4 ----------------------

SIST EN 60512-7-2:2012
- 3 - EN 60512-7-2:2012

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60512-1-1 - Connectors for electronic equipment - Tests EN 60512-1-1 -
and measurements -
Part 1-1: General examination - Test 1a:
Visual examination

---------------------- Page: 5 ----------------------

SIST EN 60512-7-2:2012

---------------------- Page: 6 ----------------------

SIST EN 60512-7-2:2012
IEC 60512-7-2
®

Edition 1.0 2011-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Connectors for electronic equipment – Tests and measurements –
Part 7-2: Impact tests (free connectors) – Test 7b: Mechanical strength impact

Connecteurs pour équipements électroniques – Essais et mesures –
Partie 7-2: Essais d’impact (fiches) – Essai 7b: Résistance mécanique aux chocs


INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX H
ICS 31.220.01, 31.220.10 ISBN 978-2-88912-775-7

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 60512-7-2:2012
– 2 – 60512-7-2  IEC:2011
CONTENTS
FOREWORD . 3
1 Scope and object . 5
2 Normative references . 5
3 Preparation . 5
3.1 Preparation of the specimen . 5
3.2 Equipment . 5
3.3 Mounting . 5
4 Test method . 6
5 Test requirements . 6
6 Details to be specified . 7
Bibliography . 8

Figure 1 – Example of mounting arrangement . 6

---------------------- Page: 8 ----------------------

SIST EN 60512-7-2:2012
60512-7-2  IEC:2011 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

CONNECTORS FOR ELECTRONIC EQUIPMENT –
TESTS AND MEASUREMENTS –

Part 7-2: Impact tests (free connectors) –
Test 7b: Mechanical strength impact


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and
...