kSIST FprEN 16510-2-1:2022

Residential solid fuel burning appliances - Part 2-1: Roomheaters

This Part 2-1 of EN 16510 is applicable to freestanding or inset roomheaters fired by solid fuel, without functional modification that operate with fire doors either as closed only or as closed or open.
The appliances covered by this Part 2-1 of EN 16510 provide heat into the space where they are installed. Additionally, where fitted with a boiler, they also provide domestic hot water and/or central heating. These appliances may burn one or more types of the following solid fuels in accordance with the appliance manufacturer’s instructions: .
 wood logs
 compressed untreated wood
 wood pellets
 solid minearal fuels
 peat briquettes.
This Part 2-1 of EN 16510 is not applicable to appliances with fan assisted combustion air or appliances that are mechanically fed.
This Part 2-1 of EN 16510 is to be used in conjunction with EN 16510-1 of which it is an integral part.

Häusliche Feuerstätten für feste Brennstoffe - Teil 2-1: Raumheizer

Dieses Dokument ist anwendbar für Raumheizer für feste Brennstoffe (freistehende oder eingebaute Raumheizgeräte für feste Brennstoffe, die mit Feuerraumtüren ausgestattet sind und entweder nur geschlossen bzw. geschlossen oder offen betrieben werden können; Einsätze ohne Funktionsänderung).
Der Verwendungszweck der Geräte ist Raumheizung in Wohngebäuden. Sie können mit wasserführenden Bauteilen (als feste Bestandteile des Gerätes mit zu erhitzendem Wasser) zur Warmwasserbereitung der Zentralheizung ausgestattet sein.
Die Geräte können wie angegeben einen oder mehrere der folgenden festen Brennstoffe verfeuern:
-   Scheitholz;
-   Holzbriketts;
-   Holzpellets;
-   Braunkohlenbriketts;
-   feste mineralische Brennstoffe;
-   Torfbriketts.
Dieses Dokument ist nicht anwendbar für Geräte mit Verbrennungsluftgebläse oder mechanisch beschickte Feuerstätten.
Dieses Dokument legt das Verfahren für die Bewertung und Überprüfung der Leistungsbeständigkeit (AVCP) der Eigenschaften von Raumheizern für feste Brennstoffe fest.

Equipement de chauffage domestique - Partie 2-1 : Poêles

Le présent document s’applique aux poêles à combustible solide (produits de chauffage décentralisés à combustible solide indépendants ou encastrés, utilisés avec les portes foyères soit uniquement fermées, soit fermées ou ouvertes ; inserts sans modification fonctionnelle).
L’usage prévu des appareils est le chauffage des locaux dans les bâtiments résidentiels. Ils peuvent être équipés d’un bouilleur (faisant partie intégrante de l’appareil et contenant de l’eau à chauffer) pour fournir de l’eau chaude aux systèmes de chauffage central.
Ces appareils peuvent utiliser un ou plusieurs des types de combustibles solides suivants, comme spécifié :
-   bûches de bois ;
-   bois compressé non traité ;
-   granulés de bois ;
-   briquettes de lignite ;
-   combustibles minéraux solides ;
-   briquettes de tourbe.
Le présent document ne s’applique pas aux appareils équipés d’un ventilateur pour l’alimentation en air de combustion ou aux appareils à alimentation mécanique.
Le présent document spécifie des modes opératoires pour l’évaluation et la vérification de la constance des performances (EVCP) des caractéristiques des poêles à combustible solide.

Grelne naprave na trdna goriva za stanovanjske stavbe - 2-1. del: Grelniki prostorov

General Information

• Status: Not Published
• Public Enquiry End Date: 04-May-2021
• ICS: 97.100.30 - Solid fuel heaters
• Technical Committee: OGS - Heating for buildings
• Current Stage: 5020 - Formal vote (FV) (Adopted Project)
• Start Date: 04-Aug-2022
• Due Date: 22-Sep-2022
• Directive: 2009/125/EC - Directive 2005/32/EC of the European Parliament and of the Council of 6 July 2005 establishing a framework for the setting of ecodesign requirements for energy-using products and amending Council Directive 92/42/EEC and Directives 96/57/EC and 2000/55/EC of the European Parliament and of the Council
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/129 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on space heating appliances
• Ref Project: FprEN 16510-2-1 - Residential solid fuel burning appliances - Part 2-1: Roomheaters

RELATIONS

• Revised: SIST EN 13240:2003/A2:2005 - Roomheaters fired by solid fuel - Requirements and test methods
• Effective Date: 17-Feb-2021
• Revised: SIST EN 13240:2003/AC:2006 - Roomheaters fired by solid fuel - Requirements and test methods
• Effective Date: 17-Feb-2021
• Revised: SIST EN 13240:2003/A2:2005/AC:2008 - Roomheaters fired by solid fuel - Requirements and test methods
• Effective Date: 17-Feb-2021
• Revised: SIST EN 13240:2003 - Room heaters fired by solid fuel - Requirements and test methods
• Effective Date: 17-Feb-2021
• Revised: kSIST FprEN 16510-2-1:2016 - Residential solid fuel burning appliances - Part 2-1: Roomheaters
• Effective Date: 01-Apr-2021
• Revised: SIST EN 13240:2003 - Room heaters fired by solid fuel - Requirements and test methods
• Effective Date: 08-Jun-2022

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN 16510-2-1:2021
01-april-2021
Stanovanjske grelne naprave na trdna goriva - 2-1. del: Grelniki prostorov
Residential solid fuel burning appliances - Part 2-1: Roomheaters
Häusliche Feuerstätten für feste Brennstoffe - Teil 2-1: Raumheizer
Equipement de chauffage domestique - Partie 2-1 : Poêles
Ta slovenski standard je istoveten z: prEN 16510-2-1
ICS:
97.100.30 Grelniki na trdo gorivo Solid fuel heaters
oSIST prEN 16510-2-1:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16510-2-1:2021
---------------------- Page: 2 ----------------------
oSIST prEN 16510-2-1:2021
DRAFT
EUROPEAN STANDARD
prEN 16510-2-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2021
ICS 97.100.30
English Version
Residential solid fuel burning appliances - Part 2-1:
Roomheaters

Equipement de chauffage domestique - Partie 2-1 : Häusliche Feuerstätten für feste Brennstoffe - Teil 2-1:

Poêles Raumheizer

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee

CEN/TC 295.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16510-2-1:2021 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 16510-2-1:2021
prEN 16510-2-1:2021 (E)
Contents Page

European foreword ....................................................................................................................................................... 4

1 Scope .................................................................................................................................................................... 5

2 Normative references .................................................................................................................................... 5

3 Terms and definitions ................................................................................................................................... 5

4 Descriptive features ....................................................................................................................................... 5

5 Appliances Performance requirements in relation to safety .......................................................... 5

6 Appliances performance requirements in relation to the appliance operation ...................... 6

7 Appliance instructions .................................................................................................................................. 6

8 Sustainable use of natural resources ....................................................................................................... 6

9 Assessment and verification of constancy of performance - AVCP ............................................... 6

10 Marking and technical datasheet .............................................................................................................. 6

Annex A (normative) Test methods ....................................................................................................................... 7

A.1 Test environment ............................................................................................................................................ 7

A.2 Test assembly ................................................................................................................................................... 7

A.3 Measurement equipment ............................................................................................................................. 7

A.4 Test procedures ............................................................................................................................................... 7

A.5 Test results ........................................................................................................................................................ 8

A.6 Calculation methods ....................................................................................................................................... 8

A.7 Test report ......................................................................................................................................................... 8

Annex B (normative) Test fuels and recommended fuels ............................................................................. 9

Annex C (informative) Arrangement for measuring the leakage rate ................................................... 10

Annex D (normative) Measuring procedure for nitrogen oxides (NOx) ............................................... 11

Annex E (normative) Measuring procedure for organic gaseous compounds (OGC) ...................... 12

Annex F (normative) Measuring procedure for particulate matter (PM) ............................................. 13

Annex G (informative) Guideline for the characteristics to be taken into account in order to

decide on families of appliances ............................................................................................................. 14

Annex H (informative) Deviation of measuring results as a basis for market surveillance

measurements ............................................................................................................................................... 15

Annex I (informative) Standing Air Loss ........................................................................................................... 16

Annex J (informative) A-deviations .................................................................................................................... 17

Annex K (normative) Energy Label ..................................................................................................................... 18

Annex ZA (informative) Relationship of this European Standard with Regulation (EU) No.

305/2011 ........................................................................................................................................................ 19

ZA.1 Scope and relevant characteristics ........................................................................................................ 19

---------------------- Page: 4 ----------------------
oSIST prEN 16510-2-1:2021
prEN 16510-2-1:2021 (E)

ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) ...................... 22

ZA.3 Assignment of AVCP tasks ......................................................................................................................... 22

---------------------- Page: 5 ----------------------
oSIST prEN 16510-2-1:2021
prEN 16510-2-1:2021 (E)
European foreword

This document (prEN 16510-2-1:2021) has been prepared by Technical Committee CEN/TC 295

“Residential solid fuel burning appliances”, the secretariat of which is held by BSI.

This document is currently submitted to the CEN Enquiry.

This document together with EN 16510-1:2021 and EN 16510-2-6 will supersede EN 13240:2001 as

amended and corrected.

This document has been prepared under a standardization request given to CEN/CENELEC by the

European Commission and the European Free Trade Association.

For relationship with (EU) Regulation 305/2011, see informative Annex ZA, which is an integral part of

this document.

The structure of EN 16510, Residential solid fuel burning appliances, is as follows:

— Part 1: General requirements and test methods;
— Part 2-1: Roomheaters;
— Part 2-2: Inset appliances including open fires;
— Part 2-3: Cookers;
— Part 2-4: Independent boilers – Nominal heat output up to 50 kW;
— Part 2-5: Slow heat release appliances;

— Part 2-6: Mechanically by wood pellets fed roomheaters, inset appliances and cookers.

Other sections of Part 2 will be added to cover residential solid fuel burning appliances not included in

parts 2-1 to 2-6.

This Part 2-1 supplements or modifies the corresponding clauses in prEN 16510-1:2021, so as to convert

that publication into the European Standard: Residential solid fuel burning appliances – Requirements and

test methods for roomheaters.

This document is expected be used in conjunction with prEN 16510-1:2021. This document refers to

Clauses of prEN 16510-1:2021 or adapts Clauses by stating “with the following modification”, “with the

following addition”, “is replaced by the following” or “shall not be applicable” in the corresponding Clause.

This document adds Clauses or Subclauses to the structure of prEN 16510-1:2021 which are particular

to this document.

Subclauses and Figures which are additional to those in prEN 16510-1:2021 are numbered starting with

101. Annexes which are additional to those in prEN 16510-1:2021 are numbered starting with AA.

---------------------- Page: 6 ----------------------
oSIST prEN 16510-2-1:2021
prEN 16510-2-1:2021 (E)
1 Scope

This document is applicable to freestanding or inset roomheaters fired by solid fuel, without functional

modification that operate with fire doors either as closed only or as closed or open.

The appliances covered by this document provide heat into the space where they are installed.

Additionally, where fitted with a boiler, they also provide domestic hot water and/or central heating.

These appliances can burn one or more types of the following solid fuels in accordance with the appliance

manufacturer’s instructions:
— wood logs;
— compressed untreated wood;
— wood pellets;
— lignite briquettes;
— solid mineral fuels;
— peat briquettes.

This document is not applicable to appliances with fan assisted combustion air or appliances that are

mechanically fed.

This document is used in conjunction with EN 16510-1 of which it is an integral part.

2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

prEN 16510-1:2021 Residential solid fuel burning appliances — Part 1: General requirements and test

methods
3 Terms and definitions
For the purposes of this document, the definitions in prEN 16510-1:2021 apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at http://www.electropedia.org/
4 Descriptive features
prEN 16510-1:2021, Clause 4, shall be applicable.
5 Appliances Performance requirements in relation to safety
prEN 16510-1:2021, Clause 5, shall be applicable.
---------------------- Page: 7 ----------------------
oSIST prEN 16510-2-1:2021
prEN 16510-2-1:2021 (E)
6 Appliances performance requirements in relation to the appliance operation

prEN 16510-1:2021, Clause 6, shall be applicable with the following modification.

6.7 Refuelling intervals
prEN 16510-1:2021, 6.7, shall be applicable with the following modification.
Replacement of Table 12:
Table 12 — Minimum refuelling intervals
Appliance type Test fuel type Minimum refuelling interval or
(as detailed in Table B.1) burning rate
At nominal heat output
Wood logs, lignite briquettes or
1,5 h
Continuous burning
peat briquettes
appliance
All other test fuels 4 h
Wood logs, lignite briquettes or
40 min
Intermittent burning
peat briquettes
appliance
All other test fuels 1 h
At slow combustion
Wood logs, lignite briquettes or
3 h
Continuous burning
peat briquettes
appliance
All other test fuels 12 h
Wood logs, lignite briquettes or
no requirements
Intermittent burning
peat briquettes
appliance
All other test fuels 10 h
7 Appliance instructions
prEN 16510-1:2021, Clause 7, shall be applicable.
8 Sustainable use of natural resources
prEN 16510-
...