SIST EN 4531-101:2016
(Main)Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 101: Optical contact for EN 4641 multimode cable -55 °C to 125 °C - Product standard
Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 101: Optical contact for EN 4641 multimode cable -55 °C to 125 °C - Product standard
This standard defines the performance and dimensions of optical PC profiled contact for multimode 62,5 micrometres/125 micrometres or 50 micrometres/125 micrometres fibre and (1,8 0,1) mm diameter cable.
Luft- und Raumfahrt - Optische Rundsteckverbinder mit dreigängiger Schraubkupplung - Bündige Kontakte - Teil 101: Optischer Kontakt für EN 4641 -55 °C bis 125 °C - Produktnorm
Diese Norm legt die Leistungsdaten und Maße von optischen Kontakten mit PC-Profil für Multimode-Kabel mit Fasern von 62,5 µm/125 µm oder 50 µm/125 µm und einem Durchmesser von (1,8 ± 0,1) mm fest.
Série aérospatiale - Connecteurs optiques circulaires à accouplement par bague filetée à trois filets - Contacts affleurants - Partie101: Contact optique pour câble multimode EN 4641 -55 °C à 125 °C - Norme de produit
Aeronavtika - Konektorji, optični, okrogli, z enim ali več zatiči, priključeni z navojnim obročkom - Izravnani kontakti - 101. del: Optični kontakt za kabel EN 4641 - 55 °C do 125 °C - Standard za proizvod
Ta standard opredeljuje lastnosti in mere optičnih kontaktov s fizičnim stikom za večrodne kable s premerom vlaken 62,5 mikrometrov/125 mikrometrov ali 50 mikrometrov/125 mikrometrov in (1,8 0,1) mm.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Optische Rundsteckverbinder mit dreigängiger Schraubkupplung - Bündige Kontakte - Teil 101: Optischer Kontakt für EN 4641 -55 °C bis 125 °C - ProduktnormSérie aérospatiale - Connecteurs optiques circulaires à accouplement par bague filetée à trois filets - Contacts affleurants - Partie101: Contact optique pour câble multimode EN 4641 -55 °C à 125 °C - Norme de produitAerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 101: Optical contact for EN 4641 multimode cable -55 °C to 125 °C - Product standard49.060Aerospace electric equipment and systems31.220.10Plug-and-socket devices. ConnectorsICS:Ta slovenski standard je istoveten z:EN 4531-101:2016SIST EN 4531-101:2016en,fr,de01-marec-2016SIST EN 4531-101:2016SLOVENSKI
STANDARDSIST EN 4531-101:20121DGRPHãþD
SIST EN 4531-101:2016
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4531-101
January
t r s x ICS
v {ä r x r Supersedes EN
v w u sæ s r sã t r s tEnglish Version
Aerospace series æ Connectorsá opticalá circulará single and multipiná coupled by triple start threaded ring æ Flush contacts æ Part
s r sã Optical contact for EN
v x v s multimode cable æ w w
¹C to
s t w
¹C æ Product standard Série aérospatiale æ Connecteurs optiques circulaires à accouplement par bague filetée à trois filets æ Contacts affleurants æ Partie s r sã Contact optique pour câble multimode EN
v x v s æ w w
¹C à
s t w
¹C æ Norme de produit Luftæ und Raumfahrt æ Optische Rundsteckverbinder mit dreigängiger Schraubkupplung æ Bündige Kontakte æ Teil
s r sã Optischer Kontakt für EN
v x v sæMultimodekabelá æ w w
¹C bis
s t w
¹C æ Produktnorm This European Standard was approved by CEN on
z June
t r s wä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
v w u sæ s r sã t r s x ESIST EN 4531-101:2016
EN 4531-101:2016 (E) 2 Contents
Page European Foreword . 3 1 Scope . 4 2 Normative references . 4 3 Termini dimensions . 5 4 General dimensions of the optical termini . 6 4.1 Contact dimension and mass . 6 4.2 Boot dimension . 7 4.3 Material . 7 5 Technical specification . 8 6 Tests according to EN 2591-100 . 8 7 Cleaning instructions . 9 8 Tooling . 9 9 Termination instructions . 10 10 Designation. 10 Bibliography . 11
SIST EN 4531-101:2016
EN 4531-101:2016 (E) 3 European Foreword This document (EN 4531-101:2016) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2016, and conflicting national standards shall be withdrawn at the latest by July 2016. This document supersedes EN 4531-101:2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portuga
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.