SIST EN 1281-1:2000

Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets

This Part of this European Standard specifies dimensional and gauging requirements for cones and sockets and performance requirements for latching connectors intended for use in medical devices, e.g. in breathing systems, anaesthetic gas scavenging systems and vaporizers.  This European Standard does not specify the medical devices and accessories on which these connectors are to be provided.   NOTE 1: It is expected that requirements on the use of suitable materials and for the application of this standard will be included in particular standards for specific medical devices and accessories.   NOTE 2: Requirements for screw-threaded weight-bearing conical connectors are specified in Part 2 of this standard.

Anästhesie- und Beatmungsgeräte - Konische Konnektoren - Teil 1: Männliche und weibliche Konen

Dieser Teil dieser Europäischen Norm legt Anforderungen an Masse und Lehren für männliche und weibliche Konen und Leistungsanforderungen für Schnapp- konnerktoren zur Verwendung in medizinischen Geräten fest, z B. in AtemsystemenAnästhesiegasfortleitungssystemen und Verdunstën. Diese Europäischen Norm legt keine Anforderungen für medizinische Geräte und Zubehör fest, bei denen diese Konnektoren zu verwenden sind.

Matériel respiratoire et d'anesthésie - Raccords coniques - Partie 1: Raccords mâles et femelles

La présente norme européenne spécifie les prescriptions fondamentales concernant les dimensions et les calibres pour les raccords mâles et femelless, ainsi queles prescriptions relatives aux performances des raccords avec systeme de blo- cage destinés aux disposifs médicaux : systemes respiratoire, systeme d'évacu- ation de gaz d'anesthésie en exces et évaporateurs, par exemple. Cette norme ne spécifie pas quels sont les dispositifs médicaux et les accessoires sur lesquels ces raccords doivent etre montés.

Anestezijska in dihalna oprema - Stožčasti priključki - 1. del: Vtikači in vtičnice

General Information

• Status: Withdrawn
• Publication Date: 31-Dec-1999
• Withdrawal Date: 31-Oct-2004
• ICS: 11.040.10 - Anaesthetic, respiratory and reanimation equipment
• Technical Committee: VAZ - Healthcare
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Nov-2004
• Due Date: 01-Nov-2004
• Completion Date: 01-Nov-2004
• Directive: 93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
• Mandate: M/023 - Standardization mandate to CEN/CENELEC concerning the development of European standards relating to medical devices
• Ref Project: EN 1281-1:1997 - Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets

Relations

• Replaced By: SIST EN ISO 5356-1:2004 - Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets (ISO 5356-1:2004)
• Effective Date: 01-Nov-2004
• Amended By: SIST EN 1281-1:2000/A1:2000 - Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Anästhesie- und Beatmungsgeräte - Konische Konnektoren - Teil 1: Männliche und weibliche KonenMatériel respiratoire et d'anesthésie - Raccords coniques - Partie 1: Raccords mâles et femellesAnaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets11.040.10Anestezijska, respiratorna in reanimacijska opremaAnaesthetic, respiratory and reanimation equipmentICS:Ta slovenski standard je istoveten z:EN 1281-1:1997SIST EN 1281-1:2000en01-januar-2000SIST EN 1281-1:2000SLOVENSKI
STANDARD
...