oSIST prEN IEC 61347-2-11:2023
(Main)Controlgear for electric light sources - Safety - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires
Controlgear for electric light sources - Safety - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires
Geräte für Lampen - Teil 2-11: Besondere Anforderungen an elektronische Module für Leuchten
Appareillages de lampes - Partie 2-11: Prescriptions particulières pour circuits électroniques divers utilisés avec les luminaires
Stikalne naprave za sijalke - Varnost - 2-11. del: Posebne zahteve za različne elektronske sisteme v terminalih
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 61347-2-11:2023
01-julij-2023
Stikalne naprave za sijalke - Varnost - 2-11. del: Posebne zahteve za različne
elektronske sisteme v terminalih
Controlgear for electric light sources - Safety - Part 2-11: Particular requirements for
miscellaneous electronic circuits used with luminaires
Geräte für Lampen - Teil 2-11: Besondere Anforderungen an elektronische Module für
Leuchten
Appareillages de lampes - Partie 2-11: Prescriptions particulières pour circuits
électroniques divers utilisés avec les luminaires
Ta slovenski standard je istoveten z: prEN IEC 61347-2-11:2023
ICS:
29.130.01 Stikalne in krmilne naprave Switchgear and controlgear
na splošno in general
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
oSIST prEN IEC 61347-2-11:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 61347-2-11:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61347-2-11:2023
34C/1578/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61347-2-11 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-05-19 2023-08-11
SUPERSEDES DOCUMENTS:
34C/1551/CD, 34C/1559A/CC
IEC SC 34C : AUXILIARIES FOR LAMPS
SECRETARIAT: SECRETARY:
United Kingdom Mr Petar Luzajic
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In So me Coun-
tries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final
stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Controlgear for electric light sources – Safety – Part 2-11: Particular requirements for miscella-
neous electronic circuits used with luminaires
PROPOSED STABILITY DATE: 2027
NOTE FROM TC/SC OFFICERS:
Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to down-
load this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for
any other purpose without permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 61347-2-11:2023
IEC CDV 61347-2-11 © IEC 2023 2 34C/1578/CDV
1 CONTENTS
2 CONTENTS . 2
3 FOREWORD. 3
4 1 Scope . 6
5 2 Normative references . 6
6 3 Definitions . 6
7 4 General requirements . 7
8 5 General notes on tests . 7
9 6 Marking . 7
10 6.1 Information and marking items . 7
11 6.1.1 Mandatory marking . 7
12 6.1.2 Information to be provided . 7
13 6.2 Durability and legibility of marking . 7
14 6.3 Built-in and integral miscellaneous circuits . 7
15 7 Terminals . 8
16 8 Earthing . 8
17 9 Protection against accidental contact with hazardous live parts . 8
18 10 Insulation resistance and electric strength . 8
19 11 Fault conditions . 8
20 12 Construction . 8
21 13 Creepage distances, clearances and distances through insulation . 8
22 14 Screws, current-carrying parts and connections . 8
23 15 Resistance to heat, fire and tracking . 8
24 16 Thermal requirements for miscellaneous circuits . 8
25 17 Output working voltage (U ) . 8
out
26 Annex A (informative) Schedule of more onerous requirements . 10
27 Bibliography . 11
28
---------------------- Page: 4 ----------------------
oSIST prEN IEC 61347-2-11:2023
IEC CDV 61347-2-11 © IEC 2023 3 34C/1578/CDV
29 INTERNATIONAL ELECTROTECHNICAL COMMISSION
30
31 ___________
32
33 CONTROLGEAR FOR ELECTRIC LIGHT SOURCES – SAFETY
34
35 Part 2-11: Particular requirements for
36 miscellaneous electronic circuits used with luminaires
37
38
39 FOREWORD
40 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
41 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
42 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
43 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
44 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their prepa-
45 ration is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
46 participate in this preparatory work. International, governmental and non-governmental organizations liaising with
47 the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Stand-
48 ardization (ISO) in accordance with conditions determined by agreement between the two organizations.
49 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
50 consensus of opinion on the relevant subjects since each technical committee has representation from all inter-
51 ested IEC National Committees.
52 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
53 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
54 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinter-
55 pretation by any end user.
56 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications trans-
57 parently to the maximum extent possible in their national and regional publications. Any divergence between any
58 IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
59 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
60 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
61 services carried out by independent certification bodies.
62 6) All users should ensure that they have the latest edition of this publication.
63 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
64 members of its technical committees and IEC National Committees for any personal injury, property damage or
65 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and ex-
66 penses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
67 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
68 indispensable for the correct application of this publication.
69 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
70 rights. IEC shall not be held responsible for identifying any or all such patent rights.
71 IEC 61347-2-11 has been prepared by subcommittee 34C: Auxiliaries for lamps, of IEC tech-
72 nical committee 34: Lighting.
73 This second edition cancels and replaces the first edition published in 2001 and Amendment 1
74 (2017). This edition constitutes a technical revision.
75
---------------------- Page: 5 ----------------------
oSIST prEN IEC 61347-2-11:2023
IEC CDV 61347-2-11 © IEC 2023 4 34C/1578/CDV
76 This edition includes the following significant technical changes with respect to the previous
77 edition:
78 a) changes in IEC 61347-1 (see edition 4 of IEC 61347-1)
79 – alignment with respect to edition 4 of IEC 61347-1:
80 – introduction of dated references as appropriate
81 b) deletion of clauses/subclauses which are either no longer relevant or now covered in part 1
82 c) scope extension to 1 500 V for DC
83 d) revision of information and marking requirements
84 e) addition of requirements for the determination of the output working voltage (new Clause 17)
85 This
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.