SIST EN 737-4:2000
(Main)Medical gas pipeline systems - Part 4: Terminal units for anaesthetic gas scavenging systems
Medical gas pipeline systems - Part 4: Terminal units for anaesthetic gas scavenging systems
This Part of this European Standard specifies requirements and dimensions for terminal units intended for use in anaesthetic gas scavenging systems specified in prEN 737-2 for the scavenging of medical gases and anaesthetic vapours. It is intended especially to ensure the type-specific assembly of terminal units and to prevent their interchange between different services. This Part of this European Standard also specifies requirements and dimensions for the mating counterpart (probe) of the type-specific connection point which is part of the terminal unit. This Part of this European Standard does not specify the ranges of nominal operating pressures for terminal units (see prEN 737-2). This Part of this European Standard specifies two types of terminal units which are non-interchangeable, for use where the power device is upstream or downstream of the terminal unit. Figure 1 shows the use of the two types of terminal units.
Rohrleitungssysteme für medizinische Gase - Teil 4: Entnahmestellen für Anästhesiegas- Fortleitungssysteme
Dieser Teil dieser Europäischen Norm legt die Anforderungen und Maße für Entnahmestellen fest, die in Anästhesiegas-Fortleitungssystemen nach prEN 737- 2 zur Fortleitung von medizinischen Gasen und Anästhesiedämpfen vorgesehen sind. Es ist vor allem beabsichtigt, die typspezifische Montage von Entnahmestellen sicherzustellen und zu verhindern, daß diese zwischen den unterschiedlichen Versorgungen vertauscht werden.
Systemes de distribution de gaz médicaux - Partie 4: Prises murales pour systemes d'évacuation des gaz d'anesthésie
La présente partie de cette norme européenne spécifie les exigences et les dimensions des prises murales destinées a etre utilisées dans les systemes d'évacuation des gaz d'anesthésie spécifiés dans l'EN 737-2 pour l'évacuation des gaz médicaux et des vapeurs d'anesthésie. Elle est particulierement destinée a garantir le montage spécifique au gaz des prises murales et a empecher l'interchangeabilité entre différentes utilisations.
Sistemi napeljav za medicinske pline - 4. del: Končni deli sistemov za odstranjevanje anestezijskih plinov in hlapov
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 737-4:2000
01-januar-2000
6LVWHPLQDSHOMDY]DPHGLFLQVNHSOLQHGHO .RQþQLGHOLVLVWHPRY]D
RGVWUDQMHYDQMHDQHVWH]LMVNLKSOLQRYLQKODSRY
Medical gas pipeline systems - Part 4: Terminal units for anaesthetic gas scavenging
systems
Rohrleitungssysteme für medizinische Gase - Teil 4: Entnahmestellen für Anästhesiegas
- Fortleitungssysteme
Systemes de distribution de gaz médicaux - Partie 4: Prises murales pour systemes
d'évacuation des gaz d'anesthésie
Ta slovenski standard je istoveten z: EN 737-4:1998
ICS:
11.040.10 Anestezijska, respiratorna in Anaesthetic, respiratory and
reanimacijska oprema reanimation equipment
SIST EN 737-4:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 737-4:2000
---------------------- Page: 2 ----------------------
SIST EN 737-4:2000
---------------------- Page: 3 ----------------------
SIST EN 737-4:2000
---------------------- Page: 4 ----------------------
SIST EN 737-4:2000
---------------------- Page: 5 ----------------------
SIST EN 737-4:2000
---------------------- Page: 6 ----------------------
SIST EN 737-4:2000
---------------------- Page: 7 ----------------------
SIST EN 737-4:2000
---------------------- Page: 8 ----------------------
SIST EN 737-4:2000
---------------------- Page: 9 ----
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.