SIST EN 13986:2005/kFprA1:2014
(Amendment)Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
This document defines wood-based panels for use in construction and specifies the relevant characteristics and the appropriate test methods to determine these characteristics for wood-based panels, unfaced, overlaid, veneered or coated:
· for internal use as structural components in dry conditions ) ;
· for internal (or protected external) use as structural components in humid conditions ) ;
· for external use as structural components ) ;
· for internal use as non-structural components in dry conditions1);
· for internal (or protected external) uses as non structural components in humid conditions2);
· for external use as non-structural components3);
· for use as structural floor decking on joists in dry1) or humid2) or exterior3) conditions;
· for use as structural roof decking on joists in dry1) or humid2) or exterior3) conditions;
· for use as structural wall sheathing on studs in dry1) or humid2) or exterior3) conditions.
It provides for the evaluation of conformity and the requirements for marking these products.
This standard covers wood-based panels in the form of solid wood panels, LVL ) , plywood, OSB, particleboards (chipboards) either resin- or cement-bonded, wet process fibreboards (hardboards, medium boards, softboards) and dry process fibreboards (MDF) for use in construction. They may contain chemical agents to improve their reaction to fire and their resistance to biological attack, e.g. by fungi and insects.
This document is not intended to be applicable to wood-based panels for use in non-constructional applications.
Holzwerkstoffe zur Verwendung im Bauwesen - Eigenschaften, Bewertung der Konformität und Kennzeichnung
Panneaux à base de bois destinés à la construction - Caractéristiques, évaluation de conformité et marquage
Lesne plošče za uporabo v gradbeništvu - Lastnosti, vrednotenje skladnosti in označevanje
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13986:2005/kFprA1:2014
01-oktober-2014
/HVQHSORãþH]DXSRUDERYJUDGEHQLãWYX/DVWQRVWLYUHGQRWHQMHVNODGQRVWLLQ
R]QDþHYDQMH
Wood-based panels for use in construction - Characteristics, evaluation of conformity
and marking
Holzwerkstoffe zur Verwendung im Bauwesen - Eigenschaften, Bewertung der
Konformität und Kennzeichnung
Panneaux à base de bois destinés à la construction - Caractéristiques, évaluation de
conformité et marquage
Ta slovenski standard je istoveten z: EN 13986:2004/FprA1
ICS:
79.060.01 /HVQHSORãþHQDVSORãQR Wood-based panels in
general
SIST EN 13986:2005/kFprA1:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13986:2005/kFprA1:2014
---------------------- Page: 2 ----------------------
SIST EN 13986:2005/kFprA1:2014
EUROPEAN STANDARD
FINAL DRAFT
EN 13986:2004
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
July 2014
ICS 79.060.01
English Version
Wood-based panels for use in construction - Characteristics,
evaluation of conformity and marking
Panneaux à base de bois destinés à la construction - Holzwerkstoffe zur Verwendung im Bauwesen -
Caractéristiques, évaluation de conformité et marquage Eigenschaften, Bewertung der Konformität und
Kennzeichnung
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 112.
This draft amendment A1, if approved, will modify the European Standard EN 13986:2004. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13986:2004/FprA1:2014 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13986:2005/kFprA1:2014
EN 13986:2004/FprA1:2014 (E)
Contents Page
Foreword .3
1 Modifications to Clause 2 "Normative references" .4
2 Modifications to Clause 4 "Performance characteristics required for wood-based panels
for use in construction" .4
3 Modifications to Clause 5 "Determination of the performance characteristics " .6
4 Modifications to Clause 6 "Evaluation of conformity".8
5 Modification to Clause 7 "Marking" . 19
6 Modifications to Annex ZA "Clauses of this European Standard addressing the
provisions of the EU Construction Products Directive" . 19
2
---------------------- Page: 4 ----------------------
SIST EN 13986:2005/kFprA1:2014
EN 13986:2004/FprA1:2014 (E)
Foreword
This document (EN 13986:2004/FprA1:2014) has been prepared by Technical Committee CEN/TC 112
“Wood-based panels”, the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.