Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 001: Technical specification

This document specifies the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programmes and groups for bayonet coupling circular connectors, intended for use in an operating temperature range of -65 °C to 175 °C or 200 °C continuous according to the class and models.

Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit Bajonettkupplung, Betriebstemperatur 175 °C oder 200 °C konstant - Teil 001: Technische Lieferbedingungen

Série aérospatiale - Connecteurs électriques circulaires à accouplement par baïonnettes, température d' utilisation 175 °C ou 200 °C continu - Partie 001: Spécification technique

Le présent document spécifie les caractéristiques générales, les conditions de qualification, de réception et d'assurance qualité ainsi que les programmes et les groupes d'essais des connecteurs circulaires à accouplement par baïonnettes, destinés à une utilisation dans une plage de températures comprises entre -65 °C et 175 °C ou 200 °C continu suivant la classe et les modèles.

Aeronavtika - Konektorji, električni, okrogli, bajonetno sklapljanje, stalna delovna temperatura 175 °C ali 200 °C - 001. del: Tehnična specifikacija

General Information

Status
Not Published
Public Enquiry End Date
28-May-2024
Technical Committee
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
25-Mar-2024
Due Date
12-Aug-2024

Relations

Buy Standard

Draft
prEN 3646-001:2024
English language
55 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 3646-001:2024
01-maj-2024
Aeronavtika - Konektorji, električni, okrogli, bajonetno sklapljanje, stalna delovna
temperatura 175 °C ali 200 °C - 001. del: Tehnična specifikacija
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating
temperature 175 °C or 200 °C continuous - Part 001: Technical specification
Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit Bajonettkupplung,
Betriebstemperatur 175 °C oder 200 °C konstant - Teil 001: Technische
Lieferbedingungen
Série aérospatiale - Connecteurs électriques circulaires à accouplement par baïonnettes,
température d' utilisation 175 °C ou 200 °C continu - Partie 001: Spécification technique
Ta slovenski standard je istoveten z: prEN 3646-001
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 3646-001:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 3646-001:2024

---------------------- Page: 2 ----------------------
oSIST prEN 3646-001:2024


DRAFT
EUROPEAN STANDARD
prEN 3646-001
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2024
ICS 49.060 Will supersede EN 3646-001:2015
English Version

Aerospace series - Connectors, electrical, circular, bayonet
coupling, operating temperature 175 °C or 200 °C
continuous - Part 001: Technical specification
Série aérospatiale - Connecteurs électriques circulaires Luft- und Raumfahrt - Elektrische Rundsteckverbinder
à accouplement par baïonnettes, température d' mit Bajonettkupplung, Betriebstemperatur 175 °C oder
utilisation 175 °C ou 200 °C continu - Partie 001: 200 °C konstant - Teil 001: Technische
Spécification technique Lieferbedingungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3646-001:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 3646-001:2024
prEN 3646-001:2024 (E)
Contents Page
European foreword . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Description . 6
4.1 General . 6
4.2 Receptacle .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.