oSIST prEN 3475-806:2023

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 806: Attenuation

Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 806: Dämpfung

Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 806: Affaiblissement

La présente norme spécifie les méthodes de mesure de l'affaiblissement d'un câble.
Elle est utilisée conjointement avec l’EN 3475 100 et l’EN 50289 1 8.

Aeronavtika - Električni kabli za uporabo v zračnih plovilih - Preskusne metode - 806. del: Slabljenje

General Information

• Status: Not Published
• Public Enquiry End Date: 06-Jun-2023
• ICS: 29.060.20 - Cables
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 27-Mar-2023
• Due Date: 14-Aug-2023
• Completion Date: 09-Jun-2023
• Ref Project: prEN 3475-806 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 806: Attenuation

Relations

• Replaces: SIST EN 3475-806:2004 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 806: Attenuation
• Effective Date: 02-Nov-2022

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 3475-806:2023
01-maj-2023
Nadomešča:
SIST EN 3475-806:2004
Aeronavtika - Električni kabli za uporabo v zračnih plovilih - Preskusne metode -
806. del: Slabljenje
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 806: Attenuation
Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren -
Teil 806: Dämpfung
Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais -
Partie 806: Affaiblissement
Ta slovenski standard je istoveten z: prEN 3475-806
ICS:
29.060.20 Kabli Cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 3475-806:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 3475-806:2023

---------------------- Page: 2 ----------------------
oSIST prEN 3475-806:2023


DRAFT
EUROPEAN STANDARD
prEN 3475-806
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2023
ICS 49.060 Will supersede EN 3475-806:2002
English Version

Aerospace series - Cables, electrical, aircraft use - Test
methods - Part 806: Attenuation
Série aérospatiale - Câbles électriques à usage Luft- und Raumfahrt - Elektrische Leitungen für
aéronautique - Méthodes d'essais - Partie 806: Luftfahrtverwendung - Prüfverfahren - Teil 806:
Affaiblissement Dämpfung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3475-806:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 3475-806:2023
prEN 3475-806:2023 (E)
Contents Page

European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Preparation of specimens . 4
5 Methods . 4
5.1 Insertion method . 4
5.2 Comparison of input and output voltage or power (insertion loss ≥ 3 db) . 5
5.2.1 General. 5
5.2.2 Layout . 5
5.2.3 Procedure . 7
5.2.4 Expression of results . 7
6 Requirement . 7


2

---------------------- Page: 4 ----------------------
oSIST prEN 3475-806:2023
prEN 3475-806:2023 (E)
European foreword
This document (prEN 3475-806:2023) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 3475-806:2002.
The main changes compared to the previous edi
...