oSIST prEN ISO 5463:2023

Geometrical product specifications (GPS) - Form measuring equipment; Rotary axis form measuring instruments - Design and metrological characteristics (ISO/DIS 5463:2023)

This document specifies the most important design and metrological characteristics of rotary axis form measuring instruments.
It is not applicable to coordinate measurement systems as defined by ISO 10360, whether they are fitted with a rotary axis or not, except with special agreement.

Geometrische Produktspezifikationen (GPS) - Formmessgeräte; Formmessgeräte mit Drehachse - Konstruktion und messtechnische Eigenschaften (ISO/DIS 5463:2023)

Spécification géométrique des produits (GPS) - Équipements de mesure de forme ; Instruments de mesure de forme à plateau tournant - Caractéristiques de conception et caractéristiques métrologiques (ISO/DIS 5463:2023)

Specifikacija geometrijskih veličin izdelka - Oprema za merjenje oblike; naprave za merjenje oblike z rotacijsko osjo - Zasnova in meroslovne značilnosti (ISO/DIS 5463:2023)

General Information

• Status: Not Published
• Public Enquiry End Date: 22-Oct-2023
• ICS: 17.040.30 - Measuring instruments
• ICS: 17.040.40 - Geometrical Product Specification (GPS)
• Technical Committee: ISEL - Mechanical elements
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 09-Aug-2023
• Due Date: 27-Dec-2023
• Ref Project: prEN ISO 5463 - Geometrical product specifications (GPS) - Form measuring equipment; Rotary axis form measuring instruments - Design and metrological characteristics (ISO/DIS 5463:2023)

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 5463:2023
01-oktober-2023
Specifikacija geometrijskih veličin izdelka - Oprema za merjenje oblike; naprave za
merjenje oblike z rotacijsko osjo - Zasnova in meroslovne značilnosti (ISO/DIS
5463:2023)
Geometrical product specifications (GPS) - Form measuring equipment; Rotary axis form
measuring instruments - Design and metrological characteristics (ISO/DIS 5463:2023)
Geometrische Produktspezifikationen (GPS) - Formmessgeräte; Formmessgeräte mit
Drehachse - Konstruktion und messtechnische Eigenschaften (ISO/DIS 5463:2023)
Spécification géométrique des produits (GPS) - Équipements de mesure de forme ;
Instruments de mesure de forme à plateau tournant - Caractéristiques de conception et
caractéristiques métrologiques (ISO/DIS 5463:2023)
Ta slovenski standard je istoveten z: prEN ISO 5463
ICS:
17.040.30 Merila Measuring instruments
17.040.40 Specifikacija geometrijskih Geometrical Product
veličin izdelka (GPS) Specification (GPS)
oSIST prEN ISO 5463:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 5463:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 5463:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 5463
ISO/TC 213 Secretariat: BSI
Voting begins on: Voting terminates on:
2023-08-01 2023-10-24
Geometrical product specifications (GPS) — Form
measuring equipment; Rotary axis form measuring
instruments — Design and metrological characteristics
Spécification géométrique des produits (GPS) — Équipements de mesure de forme ; Instruments de mesure
de forme à plateau tournant — Caractéristiques de conception et caractéristiques métrologiques
ICS: 17.040.30; 17.040.40
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 5463:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 5463:2023
ISO/DIS 5463:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 5463
ISO/TC 213 Secretariat: BSI
Voting begins on: Voting terminates on:

Geometrical product specifications (GPS) — Form
measuring equipment; Rotary axis form measuring
instruments — Design and metrological characteristics
Spécification géométrique des produits (GPS) — Équipements de mesure de forme ; Instruments de mesure
de forme à plateau tournant — Caractéristiques de conception et caractéristiques métrologiques
ICS: 17.040.30; 17.040.40
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 5463:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 5463:2023
ISO/DIS 5463:2023(E)
Contents Page
Foreword .
...