SIST EN 60835-2-3:2002

Methods of measurement for equipment used in digital microwave radio transmission systems -- Part 2: Measurements on terrestrial radio-relay systems -- Section 3: RF branching networks

Deals with methods of measurement for branching networks used in digital radio-relay systems.

Meßverfahren für Geräte in digitalen Mikrowellen-Funkübertragungssystemen -- Teil 2: Messungen an terrestrischen Richtfunksystemen -- Hauptabschnitt 3: RF-Verzweigungsnetzwerke

Méthodes de mesure applicables au matériel utilisé pour les systèmes de transmission numérique en hyperfréquence -- Partie 2: Mesures applicables aux faisceaux hertziens terrestres -- Section 3: Dispositifs de branchement aux fréquences radioélectriques

Traite des méthodes de mesure applicables aux dispositifs de branchement utilisés dans les faisceaux hertziens numériques.

Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 3: RF branching networks (IEC 60835-2-3:1992)

General Information

• Status: Published
• Publication Date: 30-Sep-2002
• ICS: 33.060.30 - Radio relay and fixed satellite communications systems
• Technical Committee: OMS - Equipment used in mobile services and satelite comunication systems
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Oct-2002
• Due Date: 01-Oct-2002
• Completion Date: 01-Oct-2002
• Ref Project: EN 60835-2-3:1993 - Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 3: RF branching networks

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60835-2-3:2002
01-oktober-2002
Methods of measurement for equipment used in digital microwave radio
transmission systems - Part 2: Measurements on terrestrial radio-relay systems -
Section 3: RF branching networks (IEC 60835-2-3:1992)
Methods of measurement for equipment used in digital microwave radio transmission
systems -- Part 2: Measurements on terrestrial radio-relay systems -- Section 3: RF
branching networks
Meßverfahren für Geräte in digitalen Mikrowellen-Funkübertragungssystemen -- Teil 2:
Messungen an terrestrischen Richtfunksystemen -- Hauptabschnitt 3: RF-
Verzweigungsnetzwerke
Méthodes de mesure applicables au matériel utilisé pour les systèmes de transmission
numérique en hyperfréquence -- Partie 2: Mesures applicables aux faisceaux hertziens
terrestres -- Section 3: Dispositifs de branchement aux fréquences radioélectriques
Ta slovenski standard je istoveten z: EN 60835-2-3:1993
ICS:
33.060.30 Radiorelejni in fiksni satelitski Radio relay and fixed satellite
komunikacijski sistemi communications systems
SIST EN 60835-2-3:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60835-2-3:2002

---------------------- Page: 2 ----------------------

SIST EN 60835-2-3:2002

---------------------- Page: 3 ----------------------

SIST EN 60835-2-3:2002

---------------------- Page: 4 ----------------------

SIST EN 60835-2-3:2002

---------------------- Page: 5 ----------------------

SIST EN 60835-2-3:2002

---------------------- Page: 6 ----------------------

SIST EN 60835-2-3:2002
NORME CEI
INTERNATIONALE IEC
60835-2-3
INTERNATIONAL
Première édition
STAN
DARD
First edition
1992-04
Méthodes de mesure applicables au matériel
utilisé pour les systèmes de transmission
numérique en hyperfréquence
Partie 2:
Mesures applicables aux faisceaux hertziens
terrestres
Section 3: Dispositifs de branchement
aux fréquences radioélectriques
Methods of measurement for equipment used in
digital microwave radio transmission systems
Part 2:
Measurements on terrestrial radio-relay systems
Section 3: RF branching networks
© IEC 1992 Droits
de reproduction réservés —
Copyright - all rights reserved
Aucune partie de cette publication
ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque
forme que ce soit et par aucun any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique,
y compris la photo- including photocopying and microfilm, without permission in
copie et les
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
PRICE CODE
International Electrotechnical Commission
IEC
Mc1HgyHapogHaa 3neKTpoTeXHH4eCHan HoMHCCHA
Pour prix, voir catalogue en vigueur
• • For price, see current catalogue

---------------------- Page: 7 ----------------------

SIST EN 60835-2-3:2002
835-2-3 © IEC — 3 —
CONTENTS
Page
FOREWORD 5
Clause
1 Scope 7
Definition and general considerations 7
2
9
Return-loss/frequency characteristic 3
4 In-band characteristics 9
4.1 Insertion loss 9
4.2 Amplitude/frequency characteristic 9
11
4.3 Group-delay/frequency characteristic
11 5 Isolation
Multi-carrier intermodulation products 11
6
11
6.1 Definition and general considerations
11
6.2 Method of measurement
13
6.3 Presentation of results
13
6.4 Details to be specified
14
Figure

---------------------- Page: 8 ----------------------

SIST EN 60835-2-3:2002
835-2-3 © IEC - 5 -
INTERNATIONAL ELECTROTECHNICAL COMMISSION
METHODS OF MEASUREMENT FOR EQUIPMENT
USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS
Part 2: Measurements on terrestrial radio-relay systems
Section 3: RF branching networks
FOREWORD
1) The formal decisions or agreements of the IEC on technical matters, prepared by Technical Committees on
which all the National Committees having a special interest therein are represented, express, as nearly as
possible, an international consensus of opinion on the subjects dealt with.
2) They have the form of recommendations for international use and they are accepted by the National
Committees in that sense.
3) In order to promote international unification, the IEC expresses the wish that all National Committees
should adopt the text of the IEC recommendation for their national rules in so far as national conditions will
permit. Any divergence between the IEC recommendation and the corresponding national rules should, as
far as possible, be clearly indicated in the latter.
This section of the International Standard IEC 835-2 has been prepared by Sub-
Committeel2E: Radio relay and fixed satellite communications systems, of IEC Technical
Committee No. 12: Radiocommunications.
The text of this section is based on the following documents:
DIS Report on Voting
12E(CO)129 12E(CO)134
Full information on the voting for the approval of this section can be found in the Voting
Report indicated in the above table.
The following IEC publications are quoted in this section:
IEC 835-1-2: 1992, Methods of measurement for equipment used in digital microwave
radio transmission systems - Part 1: Measurements common to terrestrial radio-relay
systems and satellite earth stations - Section 2: Basic characteristics.
IEC 835-1-3: 1992, Methods of measurement for equipment used in digital microwave
radio transmission systems - Part 1: Measurements common to terrestrial radio-relay
systems and satellite earth stations - Section 3: Transmission characteristics.

---------------------- Page: 9 ----------------------

SIST EN 60835-2-3:2002
835-2-3 © IEC – 7 –
METHODS OF MEASUREMENT FOR EQUIPMENT
USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS
Part 2: Measurements on terrestrial radio-relay systems
Section 3: RF
branching networks
1 Scope
This section of IEC 835-2 deals with methods of measurement for branching networks
used in digital radio-relay systems.
2 Definition and general considerations
A branching network is a multi-port network which provides the means to connect several
transmitters and receivers, operating at different frequencies, to a common antenna
feeder. An example of a branching network is shown in figure 1, where it will be seen that
the network is made up of a transmit branching assembly, a receive branching assembly,
and a transmit-receive coupler. The paths from T
n to C and from C to R n have pass-
band and stop-band characteristics, and usually need unidirec
...