kSIST FprEN ISO 8655-9:2020
(Main)Piston-operated volumetric apparatus - Part 9: Manually operated precision laboratory syringes (ISO/DIS 8655-9:2020)
Piston-operated volumetric apparatus - Part 9: Manually operated precision laboratory syringes (ISO/DIS 8655-9:2020)
This part of ISO 8655 specifies
- metrological requirements,
- maximum permissible errors,
- requirements for marking and
- information to be provided for users,
for manually operated precision laboratory syringes. It applies to syringes with nominal volumes up to 200 ml, designed to deliver their volume (Ex).
Manually operated precision laboratory syringes are instruments used for delivering liquids and gases.
The barrel is typically made of glass and the plunger and the needle are typically made of metal.
NOTE General requirements and definitions of terms for piston-operated volumetric apparatus are given in ISO 8655-1. The gravimetric reference measurement procedure for the determination of volume is given in ISO 8655-6. A photometric reference measurement procedure for the determination of is given in ISO 8655-8. Alternative methods for the determination of volume are described in ISO 8655-7.
Volumenmessgeräte mit Hubkolben - Teil 9: Manuell betätigte Präzisionslaborspritzen (ISO/DIS 8655-9:2020)
Dieses Dokument trifft Festlegungen hinsichtlich
- messtechnischer Anforderungen,
- Fehlergrenzen,
- Anforderungen an die Kennzeichnung und
- Benutzerinformation
für manuell betätigte Präzisionslaborspritzen aus Glas oder Glas und Metall, die für die Abgabe ihres gewählten Volumens (Ex) ausgelegt sind.
Manuell betätigte Präzisionslaborspritzen sind Geräte für die Dosierung von Flüssigkeiten und Gasen. Der Zylinder besteht in der Regel aus Glas und der Kolbenstopfen und die Nadel sind üblicherweise aus Metall.
Appareils volumétriques à piston - Partie 9: [Titre manque] (ISO/DIS 8655-9:2020)
Le présent document spécifie:
— les exigences métrologiques;
— les erreurs maximales tolérées;
— les exigences relatives au marquage; et
— les informations à fournir aux utilisateurs;
pour les seringues de laboratoire haute précision pour utilisation manuelle constituées de verre ou de verre et de métal, conçues pour distribuer leur volume sélectionné (Ex).
Les seringues de laboratoire haute précision pour utilisation manuelle sont des instruments utilisés pour distribuer des liquides et des gaz. Le corps est généralement en verre et le piston et l’aiguille sont généralement en métal.
Volumetrične naprave, delujoče na bat - 9. del: Ročno upravljanje natančne laboratorijske brizgalke (ISO/DIS 8655-9:2020)
General Information
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN ISO 8655-9:2020
01-oktober-2020
Volumetrične naprave, delujoče na bat - 9. del: Ročno upravljanje natančne
laboratorijske brizgalke (ISO/DIS 8655-9:2020)
Piston-operated volumetric apparatus - Part 9: Manually operated precision laboratory
syringes (ISO/DIS 8655-9:2020)Volumenmessgeräte mit Hubkolben - Teil 9: Manuell betätigte Präzisionslaborspritzen
(ISO/DIS 8655-9:2020)Appareils volumétriques à piston - Partie 9: [Titre manque] (ISO/DIS 8655-9:2020)
Ta slovenski standard je istoveten z: prEN ISO 8655-9ICS:
17.060 Merjenje prostornine, mase, Measurement of volume,
gostote, viskoznosti mass, density, viscosity
71.040.20 Laboratorijska posoda in Laboratory ware and related
aparati apparatus
oSIST prEN ISO 8655-9:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN ISO 8655-9:2020
---------------------- Page: 2 ----------------------
oSIST prEN ISO 8655-9:2020
DRAFT INTERNATIONAL STANDARD
ISO/DIS 8655-9
ISO/TC 48 Secretariat: DIN
Voting begins on: Voting terminates on:
2020-07-29 2020-10-21
Piston-operated volumetric apparatus —
Part 9:
Manually operated precision laboratory syringes
ICS: 17.060; 71.040.20
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 8655-9:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020
---------------------- Page: 3 ----------------------
oSIST prEN ISO 8655-9:2020
ISO/DIS 8655-9:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 8655-9:2020
ISO/DIS 8655-9:2020(E)
Contents Page
Foreword ........................................................................................................................................................................................................................................iv
Introduction ..................................................................................................................................................................................................................................v
1 Scope ................................................................................................................................................................................................................................. 1
2 Normative references ...................................................................................................................................................................................... 1
3 Terms and definitions ..................................................................................................................................................................................... 2
4 Principle of operation ..................................................................................................................................................................................... 2
5 Design .............................................................................................................................................................................................................................. 3
5.1 Materials ....................................................................................................................................................................................................... 3
5.2 Construction requirements .......................................................................................................................................................... 3
5.3 Reading of the scale ............................................................................................................................................................................ 4
6 Metrological performance requirements ................................................................................................................................... 4
6.1 General ........................................................................................................................................................................................................... 4
6.2 Calculation of maximum permissible errors not given in Table 2 .............................................................. 5
7 User information .................................................................................................................................................................................................. 5
8 Marking .......................................................................................................................................................................................................................... 6
Bibliography ................................................................................................................................................................................................................................ 7
© ISO 2020 – All rights reserved iii---------------------- Page: 5 ----------------------
oSIST prEN ISO 8655-9:2020
ISO/DIS 8655-9:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/ iso/ foreword .html.This document was prepared by Technical Committee ISO/TC 48, Laboratory equipment.
A list of all parts in the ISO 8655 series can be found on the ISO website.Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.iv © ISO 2020 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 8655-9:2020
ISO/DIS 8655-9:2020(E)
Introduction
ISO 8655 addresses the needs of:
— manufacturers, as a basis for quality control including, where appropriate, the issuance of
manufacturer’s declarations;— calibration laboratories, test houses, users of the equipment and other bodies as a basis for
independent calibration, verification, and routine checking.The tests specified in the ISO 8655 series are intended to be carried out by trained personnel.
Some definitions of ISO 7886-1 are included in this standard.© ISO 2020 – All rights reserved v
---------------------- Page: 7 ----------------------
oSIST prEN ISO 8655-9:2020
---------------------- Page: 8 ----------------------
oSIST prEN ISO 8655-9:2020
DRAFT INTERNATIONAL STANDARD ISO/DIS 8655-9:2020(E)
Piston-operated volumetric apparatus —
Part 9:
Manually operated precision laboratory syringes
1 Scope
This part of ISO 8655 specifies
— metrological requirements,
— maximum permissible errors,
— requirements for marking and
— information to be provided for users,
for manually operated precision laboratory syringes made of glass or glass and metal designed to
deliver their selected volume (Ex).Manually operated precision laboratory syringes are instruments used for delivering liquids and gases.
The barrel is typically made of glass and the plunger and the needle are typically made of metal.
NOTE General requirements and definitions of terms for piston-operated volumetric apparatus are given
in ISO 8655-1. The gravimetric reference measurement procedure for the determination of volume is given in
ISO 8655-6. The photometric reference measurement procedure for the determination of volume is given in
ISO 8655-8. Alternative measurement procedures for the determination of volume are given in ISO 8655-7.
2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 384:2015, Laboratory glass and plastics ware — Principles of design and construction of volumetric
instrumentsISO 4787:2010, Laboratory glassware — Volumetric instruments — Methods for testing of capacity
and for useISO 7886-1:2017, Sterile hypodermic syringes for single
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.