EN ISO 8655-9:2022
(Main)Piston-operated volumetric apparatus - Part 9: Manually operated precision laboratory syringes (ISO 8655-9:2022)
Piston-operated volumetric apparatus - Part 9: Manually operated precision laboratory syringes (ISO 8655-9:2022)
This document specifies
— metrological requirements,
— maximum permissible errors,
— requirements for marking and
— information to be provided for users,
for manually operated precision laboratory syringes made of glass or glass and metal designed to deliver their selected volume (Ex).
Manually operated precision laboratory syringes are instruments used for delivering liquids and gases. The barrel is typically made of glass and the plunger and the needle are typically made of metal.
Volumenmessgeräte mit Hubkolben - Teil 9: Manuell betätigte Präzisionslaborspritzen (ISO 8655-9:2022)
Dieses Dokument trifft Festlegungen hinsichtlich
— metrologischer Anforderungen,
— Fehlergrenzen,
— Anforderungen an die Kennzeichnung und
— Benutzerinformation
für manuell betätigte Präzisionslaborspritzen aus Glas oder Glas und Metall, die für die Abgabe (Ex) ihres gewählten Volumens ausgelegt sind.
Manuell betätigte Präzisionslaborspritzen sind Geräte für die Dosierung von Flüssigkeiten und Gasen. Der Zylinder besteht in der Regel aus Glas und der Kolbenstopfen und die Nadel sind üblicherweise aus Metall.
Appareils volumétriques à piston - Partie 9: Seringues de laboratoire haute précision pour utilisation manuelle (ISO 8655-9:2022)
Le présent document spécifie:
— les exigences métrologiques;
— les erreurs maximales tolérées;
— les exigences relatives au marquage; et
— les informations à fournir aux utilisateurs;
pour les seringues de laboratoire haute précision pour utilisation manuelle constituées de verre ou de verre et de métal, conçues pour distribuer leur volume sélectionné (Ex).
Les seringues de laboratoire haute précision pour utilisation manuelle sont des instruments utilisés pour distribuer des liquides et des gaz. Le corps est généralement en verre et le piston et l’aiguille sont généralement en métal.
Volumetrične naprave, delujoče na bat - 9. del: Ročno upravljanje natančne laboratorijske brizgalke (ISO 8655-9:2022)
Ta del standarda ISO 8655 določa:
– meroslovne zahteve;
– največje dopustne pogreške;
– zahteve za označevanje; in
– informacije, predvidene za uporabnike
za natančne laboratorijske brizge z ročnim upravljanjem. Uporablja se za brizge z nazivnimi prostorninami do 200 ml, ki so zasnovane za dovajanje ustreznega odmerka (Ex).
Natančne laboratorijske brizge z ročnim upravljanjem so instrumenti, ki se uporabljajo za dovajanje tekočin in plinov.
Njihovi tulci so običajno izdelani iz stekla, bat in igla pa iz kovine.
OPOMBA: Splošne zahteve in definicije izrazov za volumetrične naprave, delujoče na bat, so podane v standardu ISO 8655-1. Gravimetrični referenčni postopek merjenja za določanje prostornine je podan v standardu ISO 8655-6. Postopek fotometričnega referenčnega merjenja za določanje prostornine je podan v standardu ISO 8655-8. Nadomestne metode za določanje prostornine so opisane v standardu ISO 8655-7.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 8655-9:2022
01-julij-2022
Volumetrične naprave, delujoče na bat - 9. del: Ročno upravljanje natančne
laboratorijske brizgalke (ISO 8655-9:2022)
Piston-operated volumetric apparatus - Part 9: Manually operated precision laboratory
syringes (ISO 8655-9:2022)
Volumenmessgeräte mit Hubkolben - Teil 9: Manuell betätigte Präzisionslaborspritzen
(ISO 8655-9:2022)
Appareils volumétriques à piston - Partie 9: Seringues de laboratoire haute précision
pour utilisation manuelle (ISO 8655-9:2022)
Ta slovenski standard je istoveten z: EN ISO 8655-9:2022
ICS:
17.060 Merjenje prostornine, mase, Measurement of volume,
gostote, viskoznosti mass, density, viscosity
71.040.20 Laboratorijska posoda in Laboratory ware and related
aparati apparatus
SIST EN ISO 8655-9:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 8655-9:2022
---------------------- Page: 2 ----------------------
SIST EN ISO 8655-9:2022
EN ISO 8655-9
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2022
EUROPÄISCHE NORM
ICS 17.060; 71.040.20
English Version
Piston-operated volumetric apparatus - Part 9: Manually
operated precision laboratory syringes (ISO 8655-9:2022)
Appareils volumétriques à piston - Partie 9: Seringues Volumenmessgeräte mit Hubkolben - Teil 9: Manuell
de laboratoire haute précision pour utilisation betätigte Präzisionslaborspritzen (ISO 8655-9:2022)
manuelle (ISO 8655-9:2022)
This European Standard was approved by CEN on 13 February 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8655-9:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 8655-9:2022
EN ISO 8655-9:2022 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 8655-9:2022
EN ISO 8655-9:2022 (E)
European foreword
This document (EN ISO 8655-9:2022) has been prepared by Technical Committee ISO/TC 48
"Laboratory equipment" in collaboration with Technical Committee CEN/TC 332 “Laboratory
equipment” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2022, and conflicting national standards
shall be withdrawn at the latest by November 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 8655-9:2022 has been approved by CEN as EN ISO 8655-9:2022 without any
modification.
3
---
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.