iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 14420-8:2013/kFprA1:2015

(Amendment)

Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system)

Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system)

This European Standard specifies dimensions, types of connections, quality of materials, marking requirements and testing requirements for hose fittings with symmetrical half couplings (Guillemin system), with mobile locking ring, for hose assemblies with a maximum working pressure of up to 10 bar1) with hose tails according to EN 14420-2 and clamp units according to EN 14420-3. Couplings in accordance with this document serve as link between hoses and connections to transport liquids, solids (e.g. powders, granules) except steam and liquid gas. The working temperature range is -20 °C up to +65 °C. With the Amendment 1 a cross-reference will be added regarding the permissible working pressures and temperature stated in EN 14420-1, 4.3. Furthermore, Figure 1 will be updated.
1) 1 bar = 0,1 MPa

Schlaucharmaturen mit Klemmfassungen - Teil 8: Symmetrische Kupplungen (System Guillemin)

Raccords pour flexibles avec demi-coquille - Partie 8: Demi raccords symétriques (système Guillemin)

Cevni fitingi z objemkami - 8. del: Simetrična spojka (sistem Guillemin)

General Information

Status
Not Published
Public Enquiry End Date
09-Dec-2015
ICS
23.040.60 - Flanges, couplings and joints
Technical Committee
IPMA - Polimer materials and products
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
17-Feb-2016
Due Date
22-Feb-2016
Completion Date
17-Feb-2016
Ref Project
EN 14420-8:2013/FprA1:2015 - Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system)

Relations

Consolidated By
SIST EN 14420-8:2013+A1:2016 - Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system)
Effective Date
18-Jan-2023
Amends
SIST EN 14420-8:2013 - Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system)
Effective Date
01-Nov-2015
Consolidated By
SIST EN 14420-8:2013+A1:2016 - Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system)
Effective Date
19-Jan-2023
Consolidated By
SIST EN 14420-8:2013+A1:2016 - Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system)
Effective Date
01-Apr-2016

Buy Standard

EN 14420-8:2013/kFprA1:2015EN 14420-8:2013/kFprA1:2015
PreviousNext
Draft
EN 14420-8:2013/kFprA1:2015
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14420-8:2013/kFprA1:2015
01-november-2015
&HYQLILWLQJL]REMHPNDPLGHO6LPHWULþQDVSRMND VLVWHP*XLOOHPLQ
Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system)
Schlaucharmaturen mit Klemmfassungen - Teil 8: Symmetrische Kupplungen (System
Guillemin)
Raccords pour flexibles avec demi-coquille - Partie 8: Demi raccords symétriques
(système Guillemin)
Ta slovenski standard je istoveten z: EN 14420-8:2013/FprA1:2015
ICS:
23.040.60 Prirobnice, oglavki in spojni Flanges, couplings and joints
elementi
SIST EN 14420-8:2013/kFprA1:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14420-8:2013/kFprA1:2015

---------------------- Page: 2 ----------------------

SIST EN 14420-8:2013/kFprA1:2015

EUROPEAN STANDARD
FINAL DRAFT
EN 14420-8:2013
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
August 2015
ICS 23.040.70
English Version
Hose fittings with clamp units - Part 8: Symmetrical half coupling
(Guillemin system)
Raccords pour flexibles avec demi-coquille - Partie 8: Demi Schlaucharmaturen mit Klemmfassungen - Teil 8:
raccords symétriques (système Guillemin) Symmetrische Kupplungen (System Guillemin)
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 218.

This draft amendment A1, if approved, will modify the European Standard EN 14420-8:2013. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, I
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 14420-4:2022(Main)
Hose fittings with clamp units - Part 4: Flange connections
EN 14420-4:2022

This document specifies requirements for hose tails according to EN 14420-2, with flanges of mating dimensions PN 10/PN 16/PN 25/PN 40 (according to nominal size and pressure stage) according to EN 1092 1, on hose fittings with clamp units according to EN 14420-3.
Maximum working pressure is 25 bar ); maximum working temperature is 65 °C.
Additionally, flanges are also usable according to EN 14422.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14420-7:2022(Main)
Hose fittings with clamp units - Part 7: Cam locking couplings
EN 14420-7:2022

This document specifies the design, materials, dimensions and marking requirements for cam locking couplings that serve as the link between hoses and connections to transport liquids, solids and gases, except liquid gas and steam. The couplings are capable of operating within the pressure range −0,8 bar1 to 16 bar and in a working temperature range of −20 °C up to +65 °C. For all sizes of aluminium-cast-material couplings and for all couplings size DN 100 the pressure range is from −0,8 bar to 10 bar.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14420-2:2022(Main)
Hose fittings with clamp units - Part 2: Hose side parts of hose tail
EN 14420-2:2022

This European Standard specifies requirements for the hose tail of hose fittings according to EN 14420 1 for use with clamp units according to EN 14420 3. Furthermore, it specifies materials for hose fittings with clamp units according to EN 14420-4 to EN 14420-8.
Maximum working pressure is 25 bar;  maximum working temperature is 65 °C.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14420-8:2013+A1:2016(Main)
Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system)
EN 14420-8:2013+A1:2016

This European Standard specifies dimensions, types of connections, quality of materials, marking requirements and testing requirements for hose fittings with symmetrical half couplings (Guillemin system), with mobile locking ring, for hose assemblies with a maximum working pressure of up to 10 bar ) with hose tails according to EN 14420 2 and clamp units according to EN 14420 3. Couplings in accordance with this document serve as link between hoses and connections to transport liquids, solids (e.g. powders, granules) except steam and liquid gas. The working temperature range is -20 °C up to +65 °C.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14420-6:2013(Main)
Hose fittings with clamp units - Part 6: TW tank truck couplings
EN 14420-6:2013

This European Standard specifies the fitting combinations, design, materials and dimensions for hose fittings with couplings for tank trucks (TW couplings). Couplings for tank trucks in accordance with this document are intended to link hoses with connections for the transport of liquids, solid matters and gases with the exception of liquid gas and steam. They can be employed in a working pressure range of -0,8 bar1) up to 16 bar at working temperatures of -20 °C up to +65 °C. Couplings for tank trucks for other operating conditions are subject to agreement.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14420-3:2013(Main)
Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned
EN 14420-3:2013

This European Standard specifies requirements for clamp units for hose couplings according to EN 14420-1 for use with hose tails according to EN 14420-2. Maximum working pressure is 25 bar; maximum working temperature is 65 °C.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14420-1:2013(Main)
Hose fittings with clamp units - Part 1: Requirements, survey, designation and testing
EN 14420-1:2013

This European Standard specifies requirements for hose fittings with clamp units for hoses made of rubber/plastics or thermoplastics preferably for use with flammable and non-flammable products. It contains requirements for hose fittings to ensure that, when used appropriately, the user or third persons are not exposed to hazards from fire, explosions or acid burns, for example from mineral oils or chemicals, and that the environment is protected from pollution and other detriments. The use of non-asbestos materials for gaskets in hose fittings is recommended in this series of standards. For maximum working pressure (WP) and temperature see 4.3.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14420-5:2013(Main)
Hose fittings with clamp units - Part 5: Threaded connections
EN 14420-5:2013

This European Standard specifies requirements for hose fittings with clamp units according to EN 14420-1 with union nut and pipe thread according to EN ISO 228-1 as well as for hose tails according to EN 14420-2 with male pipe thread according to EN ISO 228-1. Maximum working pressure is 25 bar1); maximum working temperature is 65 °C.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14525:2022(Main)
Ductile iron and steel wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, steel, PVC-U, PVC-O, PE, fibre-cement
EN 14525:2022

This document specifies the requirements and associated test methods applicable to wide tolerance ductile iron and steel couplings, stepped/reducing couplings and flange adaptors intended for use with pipe components made from a number of pipe materials (ductile iron, grey iron, PE in conformity with EN 12201-1 to EN 12201-5, PVC-U in conformity with EN ISO 1452-1 to EN ISO 1452-5, steel, fibre-cement), for providing a leak tight seal over a wide range of pipe outside diameters:
-   to convey water (e.g. water intended for human consumption );
-   with or without pressure;
-   to be installed below or above ground, inside or outside buildings.
This document is not intended to cover sewerage or gas applications, where additional requirements may be necessary.
This document specifies requirements for materials, dimensions and tolerances, mechanical properties and standard coatings of products.
This document covers wide tolerance couplings, stepped/reducing couplings and flange adaptors:
-   Manufactured with socketed or flanged ends;
-   Supplied externally and internally coated;
-   Suitable for ductile iron in conformity with EN 545, grey iron, PE in conformity with EN 12201-1 to EN 12201-5, PVC-U in conformity with EN ISO 1452-1 to EN ISO 1452-5, steel, fibre-cement in a size range extending from DN 40 to DN 700, for an allowable operating pressure (PFA) up to 16 bar, for fluid temperatures between 0 °C and 25 °C excluding frost. For higher temperatures, (up to 45 °C for PVC-U or 40 °C for PE) the PFA is derated as given in EN ISO 1452 and EN 12201;
-   Not intended for use in areas subjected to reaction to fire regulations.
NOTE 1   This does not preclude special arrangements for the products to be used at higher temperatures. Temperature limitations and pressure limitations are those coming from the PVC-U or PE pipes.
This document covers ductile iron couplings, stepped/reducing couplings and flange adaptors cast by any type of foundry process or manufactured by fabrication of cast components, as well as corresponding joints, in a size range extending from DN 40 to DN 700, to be used with pipes of external diameter from 40 mm to 710 mm.
As long as no equivalent European Standard exists for steel accessories, this document also covers couplings and flange adaptors which are fabricated partly or entirely from steel as well as corresponding joints, in a size range extending from DN 60 to DN 700, to be used with pipes of external diameter from 63 mm to 710 mm.
This document specifies requirements for materials, dimensions and tolerances, mechanical properties and standard coatings. It also gives minimum performance requirements for all components, including restrained and non-restrained flexible joints. Joint design and gasket shapes are outside the scope of this document.
NOTE 2   PFA can be limited depending on pipe materials effectively connected.
NOTE 3   In this document, if not specified, all pressures are relative gauge pressures, expressed in bars (100 kPa = 1 bar).

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1515-4:2021/AC:2022(Corrigendum)
Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU
EN 1515-4:2021/AC:2022

This document is applicable to the selection of bolting for flanged joints on equipment subject to the Pressure Equipment Directive 2014/68/EU.
It specifies standards and additional requirements for dimensions, material properties and technical conditions of delivery for bolting.
NOTE 1   Washers are not within the scope of this document.
The selection is based on commonly used bolting. It covers common temperature ranges of the general service of flanges.
When selecting bolting according to this document it is essential to take into account environmental conditions and other parameters including type of fluids, corrosion hazards, sour service, low temperature brittle failure and relaxation at elevated temperatures.
The purpose of this document is to provide a selection of most commonly used bolting types and bolting material combinations.
It is not the intention to specify all possible applications but to give guidance on the most common applications. For example, application limits for material in the creep range are not explicitly covered in this document. Where material standard provides mechanical properties for the creep range respective reference is made in Table 3.
NOTE 2   Special services and ambient conditions may require the application of coatings. It is the purchaser’s option to decide on this. Depending on the coating used, a verification of the temperature ranges given in Table 3 and Table 4 may be required.
NOTE 3   In Annex B there are bolting types and bolting material combinations according to commonly used national standards other than those listed in Table 2, Table 3 and Table 4.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day