kSIST FprEN ISO 9073-5:2025

Nonwovens - Test methods - Part 5: Determination of resistance to mechanical penetration (ball burst procedure) (ISO/FDIS 9073-5:2025)

This document specifies a method for determining the resistance to mechanical penetration of nonwoven fabrics by a ball of a given diameter.
The method is primarily designed to be used on nonwovens with some degree of elasticity, for which a regular burst test does not apply.

Vliesstoffe - Prüfverfahren - Teil 5: Bestimmung des Widerstandes gegen mechanische Durchdringung (Kugeldruckversuch) (ISO/FDIS 9073-5:2025)

Dieses Dokument legt ein Prüfverfahren zur Bestimmung der Beständigkeit gegen mechanische Penetration von Flächengebilden aus Vliesstoffen durch eine Kugel mit festgelegtem Durchmesser fest.
Das vorliegende Verfahren ist vorrangig so gestaltet, dass es bei Vliesstoffen mit einer gewissen Elastizität angewendet werden kann, bei denen der reguläre Berstversuch nicht anwendbar ist.

Nontissés - Méthodes d’essai - Partie 5: Détermination de la résistance à la pénétration mécanique (méthode d'éclatement à la bille) (ISO/FDIS 9073-5:2025)

Le présent document spécifie une méthode de détermination de la résistance à la pénétration mécanique des étoffes non tissées par une bille d’un diamètre donné.
Cette méthode est essentiellement destinée à être utilisée sur des nontissés ayant un certain degré d’élasticité, pour lesquels un essai d’éclatement normal ne s’applique pas.

Vlaknovine - Preskusne metode - 5. del: Ugotavljanje odpornosti proti mehanski penetraciji (preskus s kroglico) (ISO/FDIS 9073-5:2025)

General Information

• Status: Not Published
• Public Enquiry End Date: 25-Sep-2024
• ICS: 59.080.30 - Textile fabrics
• Technical Committee: ITEK - Textile and textile products
• Current Stage: 5020 - Formal vote (FV) (Adopted Project)
• Start Date: 06-Feb-2025
• Due Date: 27-Mar-2025
• Completion Date: 06-Feb-2025
• Ref Project: FprEN ISO 9073-5 - Nonwovens - Test methods - Part 5: Determination of resistance to mechanical penetration (ball burst procedure) (ISO/FDIS 9073-5:2025)

Relations

• Revises: SIST EN ISO 9073-5:2009 - Textiles - Test methods for nonwovens - Part 5: Determination of resistance to mechanical penetration (ball burst procedure) (ISO 9073-5:2008)
• Effective Date: 25-Oct-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 9073-5:2024
01-september-2024
Vlaknovine - Preskusne metode - 5. del: Ugotavljanje odpornosti proti mehanski
penetraciji (preskus s kroglico) (ISO/DIS 9073-5:2024)
Nonwovens - Test methods - Part 5: Determination of resistance to mechanical
penetration (ball burst procedure) (ISO/DIS 9073-5:2024)
Vliesstoffe - Prüfverfahren - Teil 5: Bestimmung des Widerstandes gegen mechanische
Durchdringung (Kugeldruckversuch) (ISO/DIS 9073-5:2024)
Nontissés - Méthodes d’essai - Partie 5: Détermination de la résistance à la pénétration
mécanique (méthode d'éclatement à la bille) (ISO/DIS 9073-5:2024)
Ta slovenski standard je istoveten z: prEN ISO 9073-5
ICS:
59.080.30 Tkanine Textile fabrics
oSIST prEN ISO 9073-5:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN ISO 9073-5:2024
oSIST prEN ISO 9073-5:2024
DRAFT
International
Standard
ISO/DIS 9073-5
ISO/TC 38
Nonwovens — Test methods —
Secretariat: JISC
Part 5:
Voting begins on:
Determination of resistance to 2024-07-04
mechanical penetration (ball burst
Voting terminates on:
2024-09-26
procedure)
Nontissés — Méthodes d’essai —
Partie 5: Détermination de la résistance à la pénétration
mécanique (méthode d'éclatement à la bille)
ICS: 59.080.30
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 9073-5:2024(en)
oSIST prEN ISO 9073-5:2024
DRAFT
ISO/DIS 9073-5:2024(en)
International
Standard
ISO/DIS 9073-5
ISO/TC 38
Nonwovens — Test methods —
Secretariat: JISC
Part 5:
Voting begins on:
Determination of resistance to
mechanical penetration (ball burst
Voting terminates on:
procedure)
Nontissés — Méthodes d’essai —
Partie 5: Détermination de la résistance à la pénétration
mécanique (méthode d'éclatement à la bille)
ICS: 59.080.30
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: [phone]
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: [e-mail]
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 9073-5:2024(en)
ii
oSIST prEN ISO 9073-5:2024
ISO/DIS 9073-5:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
6 Procedure . 3
7 Test report . 4
Annex A (informative) General information regarding precision. 5
Annex B (informative) General information regarding causes for low precisionwhen ball burst
testing . 6
Bibliography . 7

iii
oSIST prEN ISO 9073-5:2024
ISO/DIS 9073-5:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent
rights identified during the development of the document will be in the Introduction and/or on the ISO list of
patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 38, Textiles, in collaboration with the European
Committee for Standardization (CEN) Technical Committee CEN/TC 248, Textiles and textile products, in
accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 9073-5:2008), which has been technically
revised.
The main changes are as follows:
— the foreword has been updated;
— the title has been changed from "Textiles — Test methods for nonwovens — Part 5: Determination of
resistance to mechanical penetration (ball burst procedure) to "Nonwovens — Test methods — Part 5
Determination of resistance to mechanical penetration (ball burst procedure);
— clause 1, the scope has been corrected;
— clause 3, the normative reference has been updated;
— the sentence regarding to SI values has been added in Clause 7.
A list of all parts in the ISO 9073 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html

iv
oSIST prEN ISO 9073-5:2024
DRAFT International Standard ISO/DIS 9073-5:2024(en)
Nonwovens — Test methods —
Part 5:
Determination of resistance to mechanical penetration (ball
burst procedure)
1 Scope
This document specifies a method for determining the resistance to mechanical penetration of nonwoven
fabrics by a ball of a given diameter.
The method is primarily designed to be used on nonwovens with some degree of elasticity, for which a
regular burst test is not applicable.
2 Normative references
The following referenced documents are indispensable for the application
...