oSIST prEN 4700-006:2024

Aerospace series - Steel and heat-resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings

This document specifies the requirements for the ordering, manufacture, testing, inspection and delivery of pre-production and production forgings in steel and heat-resisting alloys.

Luft- und Raumfahrt - Stahl und Hochwarmfesten Legierungen - Umgeformte Erzeugnisse - Technische Lieferbedingungen - Teil 006: Ausfallmuster und Serienschmiedestücke

Série aérospatiale - Aciers et alliages résistant à chaud - Produits corroyés - Spécification technique - Partie 006 : Pièces types et pièces de série

Le présent document spécifie les exigences relatives aux commandes, à la fabrication, aux essais, aux contrôles et à la livraison des pièces types et pièces de série en acier et alliages résistant à chaud.

Aeronavtika - Jeklo in zlitine, odporne proti vročini - Gneteni izdelki - Tehnična specifikacija - 006. del: Vzorci in izkovki za proizvodnjo

General Information

• Status: Not Published
• Public Enquiry End Date: 30-May-2024
• ICS: 49.025.10 - Steels
• ICS: 77.140.85 - Iron and steel forgings
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 25-Mar-2024
• Due Date: 12-Aug-2024
• Ref Project: prEN 4700-006 - Aerospace series - Steel and heat-resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings

Relations

• Revises: SIST EN 4700-006:2011 - Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings
• Effective Date: 30-Aug-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 4700-006:2024
01-maj-2024
Aeronavtika - Jeklo in zlitine, odporne proti vročini - Gneteni izdelki - Tehnična
specifikacija - 006. del: Vzorci in izkovki za proizvodnjo
Aerospace series - Steel and heat-resisting alloys - Wrought products - Technical
specification - Part 006: Pre-production and production forgings
Luft- und Raumfahrt - Stahl und Hochwarmfesten Legierungen - Umgeformte
Erzeugnisse - Technische Lieferbedingungen - Teil 006: Ausfallmuster und
Serienschmiedestücke
Série aérospatiale - Aciers et alliages résistant à chaud - Produits corroyés -
Spécification technique - Partie 006 : Pièces types et pièces de série
Ta slovenski standard je istoveten z: prEN 4700-006
ICS:
49.025.10 Jekla Steels
77.140.85 Železni in jekleni kovani Iron and steel forgings
izdelki
oSIST prEN 4700-006:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 4700-006:2024

---------------------- Page: 2 ----------------------
oSIST prEN 4700-006:2024


DRAFT
EUROPEAN STANDARD
prEN 4700-006
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2024
ICS 49.025.10 Will supersede EN 4700-006:2010
English Version

Aerospace series - Steel and heat-resisting alloys -
Wrought products - Technical specification - Part 006: Pre-
production and production forgings
Série aérospatiale - Aciers et alliages résistant à chaud - Luft- und Raumfahrt - Stahl und Hochwarmfesten
Produits corroyés - Spécification technique - Partie 006 Legierungen - Umgeformte Erzeugnisse - Technische
: Pièces types et pièces de série Lieferbedingungen - Teil 006: Ausfallmuster und
Serienschmiedestücke
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4700-006:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 4700-006:2024
prEN 4700-006:2024 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 7
4 Wording of order . 7
5 Health and safety . 7
6 Technical requirements .
...