SIST EN 13141-8:2006

Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room

This European Standard specifies the laboratory test methods and test requirements for the testing of aerodynamic, thermal and acoustic performance, and the electrical power of a un-ducted mechanical supply and exhaust ventilation unit used in a single room.
In general, such a unit contains:
- supply and exhaust air fans;
- air filters;
- air to air heat exchanger for exhaust air heat recovery;
- control system.
Such equipment can be provided in more than one assembly, the separate assemblies of which are designed to be used together.
This European Standard does not deal with ducted units or units with heat pumps.
Safety requirements are given in EN 60335-2-80.

Lüftung von Gebäuden - Leistungsprüfung von Bauteilen/Produkten für die Lüftung von Wohnungen - Teil 8: Leistungsprüfung von mechanischen Zuluft- und Ablufteinheiten ohne Luftführung (einschließlich Wärmerückgewinnung) für ventilatorgestützte Lüftungsanlagen von einzelnen Räumen

Dieser Teil von prEN 13141 legt die Laborverfahren für und die Anforderungen an die Prüfung des aerodynamischen, wärmetechnischen und akustischen Verhaltens sowie die elektrische Leistung einer mechanischen Zuluft- und Ablufteinheit ohne Luftführung in einem einzelnen Raum fest.
Im Allgemeinen besteht eine derartige Einheit aus:
- Zuluft- und Fortluftventilatoren;
- Luftfiltern;
- einem Luft-zu-Luft-Wärmeübertrager für die Wärmerückgewinnung aus der Fortluft;
- einer Steuer- und Regeleinrichtung.
Eine derartige Ausstattung kann in mehr als einer Baugruppe zur Verfügung gestellt werden, wobei die einzelnen Baugruppen so ausgelegt sind, dass sie zusammen verwendet werden können.
Einheiten mit Luftführung oder mit Wärmepumpen sind in dieser Norm nicht behandelt.
Die Sicherheitsanforderungen sind in EN 60335-2-80 angegeben.

Ventilation des bâtiments - Essais des performances des composants/produits pour la ventilation des logements - Partie 8 : Essais des performances des bouches de soufflage et d'extraction (y compris la récupération de chaleur) pour les systemes de ventilation mécaniques non raccordés prévus pour une piece

La présente Norme européenne spécifie des méthodes d’essai de laboratoire ainsi que les exigences
relatives aux essais des performances aérauliques, thermiques et acoustiques et de la puissance électrique
d’une bouche de soufflage ou d’extraction pour systeme de ventilation mécanique non raccordé prévu pour
une piece.
D’une maniere générale, ce type d’unité comprend :
- des ventilateurs de soufflage et d’extraction ;
- des filtres a air ;
- un échangeur thermique air/air pour la récupération de la chaleur de l’air rejeté ;
- un systeme de régulation.
Cet équipement peut se composer de plusieurs assemblages conçus pour etre utilisés ensemble.
La présente Norme européenne ne traite pas des bouches raccordées ou équipées de pompes a chaleur.
Les exigences de sécurité sont données dans l’EN 60335-2-80.

Prezračevanje stavb - Preskušanje lastnosti komponent/proizvodov za prezračevanje stanovanj - 8. del: Preskušanje lastnosti mehanskih brezkanalnih dovodnih in odvodnih prezračevalnih enot (vključno z vračanjem toplote) za mehanske prezračevalne sisteme za mehansko prezračevanje posameznih prostorov

General Information

• Status: Withdrawn
• Publication Date: 31-May-2006
• Withdrawal Date: 09-Jul-2014
• ICS: 91.140.30 - Ventilation and air-conditioning systems
• Technical Committee: OGS - Heating for buildings
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 09-Jul-2014
• Due Date: 01-Aug-2014
• Completion Date: 10-Jul-2014
• Ref Project: EN 13141-8:2006 - Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room

Relations

• Replaced By: SIST EN 13141-8:2014 - Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room
• Effective Date: 01-Sep-2014

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13141-8:2006
01-junij-2006
3UH]UDþHYDQMHVWDYE3UHVNXãDQMHODVWQRVWLNRPSRQHQWSURL]YRGRY]D
SUH]UDþHYDQMHVWDQRYDQMGHO3UHVNXãDQMHODVWQRVWLPHKDQVNLKEUH]NDQDOQLK
GRYRGQLKLQRGYRGQLKSUH]UDþHYDOQLKHQRWYNOMXþQR]YUDþDQMHPWRSORWH]D
PHKDQVNHSUH]UDþHYDOQHVLVWHPH]DPHKDQVNRSUH]UDþHYDQMHSRVDPH]QLK
SURVWRURY
Ventilation for buildings - Performance testing of components/products for residential
ventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaust
ventilation units (including heat recovery) for mechanical ventilation systems intended for
a single room
Lüftung von Gebäuden - Leistungsprüfung von Bauteilen/Produkten für die Lüftung von
Wohnungen - Teil 8: Leistungsprüfung von mechanischen Zuluft- und Ablufteinheiten
ohne Luftführung (einschließlich Wärmerückgewinnung) für ventilatorgestützte
Lüftungsanlagen von einzelnen Räumen
Ventilation des bâtiments - Essais des performances des composants/produits pour la
ventilation des logements - Partie 8 : Essais des performances des bouches de soufflage
et d'extraction (y compris la récupération de chaleur) pour les systemes de ventilation
mécaniques non raccordés prévus pour une piece
Ta slovenski standard je istoveten z: EN 13141-8:2006
ICS:
91.140.30 3UH]UDþHYDOQLLQNOLPDWVNL Ventilation and air-
VLVWHPL conditioning
SIST EN 13141-8:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13141-8:2006

---------------------- Page: 2 ----------------------

SIST EN 13141-8:2006
EUROPEAN STANDARD
EN 13141-8
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2006
ICS 91.140.30

English Version
Ventilation for buildings - Performance testing of
components/products for residential ventilation - Part 8:
Performance testing of un-ducted mechanical supply and
exhaust ventilation units (including heat recovery) for
mechanical ventilation systems intended for a single room
Ventilation des bâtiments - Essais des performances des Lüftung von Gebäuden - Leistungsprüfung von
composants/produits pour la ventilation des logements - Bauteilen/Produkten für die Lüftung von Wohnungen - Teil
Partie 8 : Essais des performances des bouches de 8: Leistungsprüfung von mechanischen Zuluft- und
soufflage et d'extraction (y compris la récupération de Ablufteinheiten ohne Luftführung (einschließlich
chaleur) pour les systèmes de ventilation mécaniques non Wärmerückgewinnung) für ventilatorgestützte
raccordés prévus pour une pièce Lüftungsanlagen von einzelnen Räumen
This European Standard was approved by CEN on 20 January 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13141-8:2006: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13141-8:2006
EN 13141-8:2006 (E)
Contents
Page
Foreword.3
Introduction .5
1 Scope.6
2 Normative references.6
3 Terms, definitions and classification .6
3.1 Terms and definitions .6
3.2 Classification.7
4 Symbols and abbreviations .8
5 Requirements.9
6 Test methods.9
6.1 General.9
6.2 Performance testing of aerodynamic characteristics.9
6.2.1 Leakages and mixing.9
6.2.2 Air flow.10
6.2.3 Filter bypass leakage (not applicable to filter classes G1 to G4) .10
6.3 Performance testing of thermal characteristics .11
6.3.1 Temperature ratios.11
6.3.2 Operation at low outdoor temperatures .11
6.4 Performance testing of acoustic characteristics .11
6.4.1 General.11
6.4.2 Radiative sound power in the indoor or outdoor space.11
6.5 Effective power input .12
7 Test results.12
7.1 Test report.12
7.2 Product specifications.13
7.3 Leakages.13
7.4 Air flow.14
7.5 Effective power input .14
7.6 Temperature ratios.14
7.7 Derived results.15
7.8 Acoustic characteristics.15
Annex A (informative) Test layouts .16
Bibliography .18


2

---------------------- Page: 4 ----------------------

SIST EN 13141-8:2006
EN 13141-8:2006 (E)
Foreword
This European Standard (EN 13141-8:2006) has been prepared by Technical Committee CEN/TC 156 “Ventilation
for buildings”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by September 2006, and conflicting national standards shall be withdrawn at the
latest by September 2006.
The European Standard is one of a series of standards on residential ventilation. The performance characteristics
of the components/products for residential ventilation are given in EN 13142.
The position of this European Standard in the field of standards for the mechanical building services is shown in
Figure 1.
3

---------------------- Page: 5 ----------------------

SIST EN 13141-8:2006
EN 13141-8:2006 (E)

    Mechanical building services


    Ventilation and air conditioning
Control systems systems Heating systems


    Mechanical and Design criteria
Ductwork Air terminal
Air handling natural powered for the indoor System Installation
devices units residential environment performance
ventilation


Components/products Components/products Simplified calculation Design and  Performance testing
for residential ventilation for residential ventilation methods dimensioning for residential
Performance Performance testing for residential for residential ventilation system
characteristics ventilation system ventilation system

  Part 1: Externally and internally mounted air transfer devices


  Part 2: Exhaust and supply air terminal devices


  Part 3: Range hoods for residential use


  Part 4: Fans used in residential ventilation systems


  Part 5: Cowls and roof outlet terminal devices


  Part 6: Exhaust ventilation system packages used in a single dwelling


  Part 7: Performance testing and mechanical supply and recovery)

exhaust ventilation units (including heat recovery) for mechanical
  ventilation systems intended for single family dwellings

  Part 8: Performance testing of un-ducted mechanical supply and
  exhaust ventilation units (including heat recovery) for mechanical
  ventilation systems intended for a single room
Figure 1 — Position of EN 13141-8 in the field of the mechanical building services

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United
Kingdom.


4

---------------------- Page: 6 ----------------------

SIST EN 13141-8:2006
EN 13141-8:2006 (E)
Introduction
This European Standard specifies methods for the performance testing of components used in residential
ventilation systems to establish the main characteristics as identified in EN 13142.
Part 1 and Part 2 relate respectively to the externally/internally mounted air transfer devices and the exhaust/supply
air terminal devices, which are used in the residential ventilation.
Part 3 considers performance testing of range hoods for residential use, and is based on an IEC standard.
Part 4 consists in some special measurement conditions for fans to be used in the residential systems, when
applying the general ISO methods (as ISO 5801).
Part 5 gives test methods for cowls and other roof outlets.
Part 6 gives test methods for exhaust ventilation system packages used in a single dwelling.
Part 7 gives test methods for supply and exhaust ventilation unit used in a single dwelling.
Part 8 gives test methods for un-ducted supply and exhaust ventilation unit used in a single room.
The standard incorporates many references to other European and International Standards, especially on
characteristics other than the aerodynamic characteristics, for instance on acoustic characteristics.
In most cases some additional tests or some additional conditions are given for the specific use in residential
ventilation systems.
The standard can be used for the following applications:
 laboratory testing;
 attestation purposes.
5

---------------------- Page: 7 ----------------------

SIST EN 13141-8:2006
EN 13141-8:2006 (E)
1 Scope
This European Standard specifies the laboratory test methods and test requirements for the testing of
aerodynamic, thermal and acoustic performance, and the electrical power of a un-ducted mechanical supply and
exhaust ventilation unit used in a single room.
In general, such a unit contains:
 supply and exhaust air fans;
 air filters;
 air to air heat exchanger for exhaust air heat recovery;
 control system.
Such equipment can be provided in more than one assembly, the separate assemblies of which are designed to be
used together.
This European Standard does not deal with ducted units or units with heat pumps.
Safety requirements are given in EN 60335-2-80.
2 Normative references
The following referenced documents are indispensable for the application of this European Standard. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
EN 308, Heat exchangers — Test procedures for establishing performance of air to air and flue gases heat
recovery devices
EN 1886:1998, Ventilation for buildings — Air handling units — Mechanical performance
EN 12792:2003, Ventilation for buildings — Symbols, terminology and graphical symbols
EN 13141-4, Ventilation for buildings — Performance testing of components/products for residential ventilation —
Part 4: Fans used in residential ventilation systems
EN ISO 3743-2: 1996, Acoustics — Determination of sound power levels of noise sources using sound pressure —
Engineering methods for small, moveable sources in reverberant fields — Part 2: Methods for special reverberation
test rooms (ISO 3743-2:1994)
EN ISO 3744, Acoustics — Determination of sound power levels of noise sources using sound pressure —
Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994)
3 Terms, definitions and classification
3.1 Terms and definitions
For the purposes of this European Standard, the terms and definitions given in EN 12792:2003 and the following
apply.
3.1.1
external leakage
leakage to or from the air flowing inside the casing of the unit to or from the air external to the equipment under test
6

---------------------- Page: 8 ----------------------

SIST EN 13141-8:2006
EN 13141-8:2006 (E)
3.1.2
internal leakage
leakage inside the unit between the exhaust and the supply air flows
3.1.3
mixing
short circuiting
mixing of the two airflows external to the equipment under test between discharge and intake ports at both indoor
and outdoor terminal points
3.1.4
filter bypass leakage
air bypass around filter cells
3.1.5
declared maximum air volume flow
air flow corresponding to that at the maximum setting.
If the supply and exhaust air volume flows are different, then the declared maxi
...