SIST EN ISO 8847:2017
(Main)Small craft - Steering gear - Cable and pulley systems (ISO 8847:2004)
Small craft - Steering gear - Cable and pulley systems (ISO 8847:2004)
This International Standard specifies the minimum level of requirements for operation, construction and
installation of cable and pulley steering systems on sailing craft of hull length up to 24 m, with or without an
auxiliary engine.
This International Standard sets requirements for the design and construction of all components of a steering
system from the wheel to, and including, the steering arm. It applies only to cable and pulley steering systems,
whether for pedestal or bulkhead types.
The design and specifications for the rudder shaft and rudder blade are within the province of the naval
architect and are assumed to be appropriate to the size and speed of the boat.
Kleine Wasserfahrzeuge - Steuerungssystem - Kabel- und Seilzugsteuerung (ISO 8847:2004)
Petits navires - Appareils à gouverner - Systèmes à drosses et réas (ISO 8847:2004)
Mala plovila - Krmilni mehanizem - Sistemi s kabli in škripčevjem (ISO 8847:2004)
Ta mednarodni standard določa minimalno raven zahtev za delovanje, konstrukcijo in vgradnjo kablov in krmilnih sistemov na plovilih dolžine trupa do 24 m, s pomožnim motorjem ali brez njega.
Ta mednarodni standard določa zahteve za načrtovanje in konstrukcijo vseh komponent krmilnega sistema od krmila do vključno krmilne roke. Uporablja se samo za krmilne sisteme s kabli in škripčevjem, bodisi na stojalu ali s pregrado.
Zasnova in specifikacije za gred in krmilo sta v domeni pomorskega
arhitekta ter morata ustrezati velikosti in hitrosti čolna.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 8847:2017
01-oktober-2017
1DGRPHãþD
SIST EN ISO 8847:2004
SIST EN ISO 8847:2004/AC:2006
0DODSORYLOD.UPLOQLPHKDQL]HP6LVWHPLVNDEOLLQãNULSþHYMHP ,62
Small craft - Steering gear - Cable and pulley systems (ISO 8847:2004)
Kleine Wasserfahrzeuge - Steuerungssystem - Kabel- und Seilzugsteuerung (ISO
8847:2004)
Petits navires - Appareils à gouverner - Systèmes à drosses et réas (ISO 8847:2004)
Ta slovenski standard je istoveten z: EN ISO 8847:2017
ICS:
47.020.70 Navigacijska in krmilna Navigation and control
oprema equipment
47.080 ýROQL Small craft
SIST EN ISO 8847:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 8847:2017
---------------------- Page: 2 ----------------------
SIST EN ISO 8847:2017
EN ISO 8847
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2017
EUROPÄISCHE NORM
ICS 47.080 Supersedes EN ISO 8847:2004
English Version
Small craft - Steering gear - Cable and pulley systems (ISO
8847:2004)
Petits navires - Appareils à gouverner - Systèmes à Kleine Wasserfahrzeuge - Steuerungssystem - Kabel-
drosses et réas (ISO 8847:2004) und Seilzugsteuerung (ISO 8847:2004)
This European Standard was approved by CEN on 10 July 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8847:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 8847:2017
EN ISO 8847:2017 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2013/53/EU . 4
2
---------------------- Page: 4 ----------------------
SIST EN ISO 8847:2017
EN ISO 8847:2017 (E)
European foreword
The text of ISO 8847:2004 has been prepared by Technical Committee ISO/TC 188 “Small craft” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 8847:2017.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2018, and conflicting national standards
shall be withdrawn at the latest by February 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8847:2004.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 8847:2004 has been approved by CEN as EN ISO 8847:2017 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 8847:2017
EN ISO 8847:2017 (E)
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 2013/53/EU
This European standard has been prepared under a mandate given to CEN by the European Commission
to provide one means of conforming to Essential Requirements of the New Approach Directive
2013/53/EU.
Once this standard is cited in the Official Journal of the European Union under that Directive and has
been implemented as a national standard in at least one member state, compliance with the normative
clauses of this standard given in Table ZA.1 confers, within the limits of the scope of this standard, a
presumption of conformity with the relevant Essential Requirements of that Directive and associated
EFTA regulations.
Table ZA.1: Correspondence between this European Standard and Directive 2013/53/EU
Clauses/sub-clauses of Corresponding Comments
this standard annexes/paragraphs of
Directive 2013/53/EU
All Clauses Annex I, Clause 5.4.1 - The correspondence between this
European Standard and Directive
Steering system, general but
2013/53/EU is in respect of cable and
excluding propulsion control
pulley steering systems on sailing craft
systems
from the wheel to, and including, the
steering arm only. Rudder shafts and
rudder blades are excluded.
This scope of this standard is restricted
to sailing craft only.
This Standard does not address an
emergency means of steering.
This standard does not include
propulsion control systems within its
scope.
8; 9 Annex 1.A.2.5 – Owner’s Include the maximum wheel diameter
Manual in the Owner’s Manual.
All Clauses Annex II, Components of This Standard applies to the
watercraft, paragraph (3) - components of cable and pulley
steering systems for sailing craft from
Steering wheels, steering
the wheel to, and including, the
mechanisms and cable
steering arm only.
assemblies.
Rudder shafts and rudder blades are
excluded.
4
---------------------- Page: 6 ----------------------
SIST EN ISO 8847:2017
INTERNATIONAL ISO
STANDARD 8847
Second edition
2004-05-01
Small craft — Steering gear — Cable and
pulley systems
Petits navires — Appareils à gouverner — Systèmes à drosses et réas
Reference number
ISO 8847:2004(E)
©
ISO 2004
---------------------- Page: 7 ----------------------
SIST EN ISO 8847:2017
ISO 8847:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2004 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 8847:2017
ISO 8847:2004(E)
Contents Page
Foreword. iv
1 Scope. 1
2 Normative references . 1
3 Terms and definitions. 1
4 Conditions of use. 2
5 Constructional requirements. 2
6 Gear marking . 5
7 General installation requirements. 5
8 Owner’s manual . 7
9 Installation manual. 7
© ISO 2004 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 8847:2017
ISO 8847:2004(E)
Foreword
ISO
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.