SIST EN 60076-5:2006
(Main)Power transformers -- Part 5: Ability to withstand short-circuit
Power transformers -- Part 5: Ability to withstand short-circuit
This part of IEC 60076 identifies the requirements for power transformers to sustain without damage the effects of overcurrents originated by external short circuits. It describes the calculation procedures used to demonstrate the thermal ability of a power transformer to withstand such overcurrents and both the special test and the theoretical evaluation method used to demonstrate the ability to withstand the relevant dynamic effects. The requirements apply to transformers as defined in the scope of IEC 60076-1.
Leistungstransformatoren -- Teil 5: Kurzschlussfestigkeit
Transformateurs de puissance -- Partie 5: Tenue au court-circuit
Identifie les exigences pour les transformateurs de puissance pour résister sans dommage aux effets des surcharges occasionnées par des courts-circuits externes. Décrit les procédés de calcul utilisés pour démontrer l'aptitude thermique d'un transformateur de puissance à supporter de telles surcharges ainsi que l'essai spécial et la méthode de calcul utilisée pour démontrer son aptitude à résister aux effets mécaniques afférents.
Močnostni transformatorji – 5. del: Kratkostična zmogljivost (IEC 60076-5:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60076-5:2006
STANDARD
oct 2006
Močnostni transformatorji – 5. del: Kratkostična zmogljivost (IEC 60076-
5:2006)
Power transformers – Part 5: Ability to withstand short-circuit (IEC 60076-5:2006)
ICS 29.180 Referenčna številka
SIST EN 60076-5:2006(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 60076-5
NORME EUROPÉENNE
June 2006
EUROPÄISCHE NORM
ICS 29.180 Supersedes EN 60076-5:2000
English version
Power transformers
Part 5: Ability to withstand short-circuit
(IEC 60076-5:2006)
Transformateurs de puissance Leistungstransformatoren
Partie 5: Tenue au court-circuit Teil 5: Kurzschlussfestigkeit
(CEI 60076-5:2006) (IEC 60076-5:2006)
This European Standard was approved by CENELEC on 2006-04-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60076-5:2006 E
---------------------- Page: 2 ----------------------
EN 60076-5:2006 - 2 -
Foreword
The text of document 14/518/FDIS, future editio
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.