SIST EN 62875:2015
(Main)Multimedia systems and equipment - Printing specification of a texture map for auditory presentation of printed texts (IEC 62875:2015)
Multimedia systems and equipment - Printing specification of a texture map for auditory presentation of printed texts (IEC 62875:2015)
The texture map for auditory presentation of printed texts is printed on paper or shown on
display devices. This International Standard specifies the printing quality of this texture map
on paper.
In order to ensure an interoperability of the texture map specified in IEC 62665, a printing
specification based on the quality of this International Standard should be employed.
Multimediasysteme und -geräte - Druckfestlegung der Textur-Abbildung für die auditive Umsetzung von gedruckten Texte (IEC 62875:2015)
Systèmes et appareils multimédia - Technologies de L'édition électronique multimédia et des livres électroniques - Spécification d'impression de la carte de texture pour la présentation auditive de textes imprimés (IEC 62875:2015)
L'IEC 62875:2015 spécifie la qualité d'impression de cette carte de texture sur papier. La carte de texture pour la présentation auditive de textes imprimés est imprimée sur papier ou présentée sur des dispositifs d'affichage.
Večpredstavnostni sistemi in oprema - Specifikacija tiskanja teksture za karto za zvočno predstavitev tiskanih besedil (IEC 62875:2015)
Besedno vodilo za predstavitev natisnjenih besedil slušateljem je natisnjeno na papirju ali prikazano na prikazovalnikih. Ta mednarodni standard določa kakovost tiska tega besednega vodila na papirju. Za zagotavljanje interoperabilnosti teksture za karto, navedene v standardu IEC 62665, je priporočljiva uporaba specifikacije tiskanja, ki je osnovana na tem mednarodnem standardu.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62875:2015
01-september-2015
9HþSUHGVWDYQRVWQLVLVWHPLLQRSUHPD6SHFLILNDFLMDWLVNDQMDWHNVWXUH]DNDUWR]D
]YRþQRSUHGVWDYLWHYWLVNDQLKEHVHGLO ,(&
Multimedia systems and equipment - Printing specification of a texture map for auditory
presentation of printed texts (IEC 62875:2015)
Multimediasysteme und -geräte - Druckfestlegung der Textur-Abbildung für die auditive
Umsetzung von gedruckten Texte (IEC 62875:2015)
Systèmes et appareils multimédia - Technologies de L'édition électronique multimédia et
des livres électroniques - Spécification d'impression de la carte de texture pour la
présentation auditive de textes imprimés (IEC 62875:2015)
Ta slovenski standard je istoveten z: EN 62875:2015
ICS:
33.160.60 9HþSUHGVWDYQL PXOWLPHGLMVNL Multimedia systems and
VLVWHPLLQRSUHPD]D teleconferencing equipment
WHOHNRQIHUHQFH
SIST EN 62875:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62875:2015
---------------------- Page: 2 ----------------------
SIST EN 62875:2015
EUROPEAN STANDARD EN 62875
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2015
ICS 33.160
English Version
Multimedia systems and equipment - Multimedia e-publishing
and e-book technologies - Printing specification of texture map
for auditory presentation of printed texts
(IEC 62875:2015)
Systèmes et appareils multimédia - Technologies de Multimediasysteme und -geräte - Druckfestlegung der
L'édition électronique multimédia et des livres électroniques Textur-Abbildung für die auditive Umsetzung von
- Spécification d'impression de la carte de texture pour la gedruckten Texte
présentation auditive de textes imprimés (IEC 62875:2015)
(IEC 62875:2015)
This European Standard was approved by CENELEC on 2015-03-31. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62875:2015 E
---------------------- Page: 3 ----------------------
SIST EN 62875:2015
EN 62875:2015 - 2 -
Foreword
The text of document 100/2292/CDV, future edition 1 of IEC 62875, prepared by IEC/TC 100, "Audio,
video and multimedia systems and equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 62875:2015.
The following dates are fixed:
(dop) 2015-12-31
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2018-03-31
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 62875:2015 was approved by CENELEC as a European
Standard without any modification.
---------------------- Page: 4 ----------------------
SIST EN 62875:2015
- 3 - EN 62875:2015
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 62665 - Multimedia systems and equipment - EN 62665 -
Multimedia e-publishing and e-books
technologies - Texture map for auditory
presentation of printed texts
---------------------- Page: 5 ----------------------
SIST EN 62875:2015
---------------------- Page: 6 ----------------------
SIST EN 62875:2015
IEC 62875
®
Edition 1.0 2015-02
INTERNATIONAL
STANDARD
colour
inside
Multimedia systems and equipment – Multimedia e-publishing and e-book
technologies – Printing specification of texture map for auditory presentation of
printed texts
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.160 ISBN 978-2-8322-2271-3
Warning! Make sure that you obtained this publication from an authorized distributor.
® Registered trademark of the International Electrotechnical Commission
---------------------- Page: 7 ----------------------
SIST EN 62875:2015
– 2 – IEC 62875:2015 © IEC 2015
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative reference . 5
3 Terms and definitions . 5
4 Printing specification . 6
4.1 General . 6
4.2 Size of a texture map . 6
4.3 Printing quality of a texture map . 6
4.3.1 Printing quality . 6
4.3.2 Sampling line . 7
4.3.3 Quality measure . 8
4.4 Location of a texture map. 11
4.5 Location of a notch . 11
Annex A (informative) Examples of visible quality of a texture map . 13
Annex B (informative) Creating process of printed matter including a texture map . 15
Figure 1 – Sampling lines in case of size M texture map . 7
Figure 2 – Reflectance pattern of cells on scanning the sampling lines . 8
Figure 3 – Length between end points of tick marks on a horizontal sampling line . 9
Figure 4 – Location of a texture map . 11
Figure 5 – Location of a single notch . 12
Figure 6 – Location of double notches . 12
Figure A.1 – Texture map with high printing quality . 13
Figure A.2 – Texture map including low contrast cells and non-square cells. 13
Figure A.3 – Texture map with low sharpness . 14
Figure A.4 – Texture map processed by non-preserving data compression . 14
Figure B.1 – Creating process of printed matter including a texture map . 15
Table 1 – Sizes of a texture map . 6
Table 2 – Printing quality of a texture map . 7
Table 3 – Value of print contrast . 8
Table 4 – Value of symmetry of cell pattern . 9
Table 5 – Value of squareness . 9
Table 6 – Value of size accuracy . 10
Table 7 – Value of tick mark identification . 10
Table 8 – Value of quiet zone sufficiency . 10
Table 9 – Value of uselessness of error correction . 11
Table 10 – Value of decodability . 11
---------------------- Page: 8 ----------------------
SIST EN 62875:2015
IEC 62875:2015 © IEC 2015 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MULTIMEDIA SYSTEMS AND EQUIPMENT –
MULTIMEDIA E-PUBLISHING AND E-BOOK TECHNOLOGIES –
PRINTING SPECIFICATION OF TEXTURE MAP FOR AUDITORY
PRESENTATION OF PRINTED TEXTS
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) A
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.