oSIST prEN 4165-025:2022
(Main)Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 025: Single module receptacle - Product standard
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 025: Single module receptacle - Product standard
This document defines the single module receptacle used in the family of rectangular electrical connectors. The plug corresponding to this receptacle is defined in EN 4165-024. Accessories and protective cover corresponding to those plugs are defined in EN 4165-026. The cavity of this connector is uncoded, so it can accept polarized modules N, A, B, C and D as defined in EN 4165-002.
Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise - Betriebstemperatur 175 °C konstant - Teil 025: Fester Steckverbinder für Einzelmodul - Produktnorm
Série aérospatiale - Connecteurs électriques rectangulaires modulaires - Température d'utilisation 175 °C continu - Partie 025 : Embase mono module - Norme de produit
Le présent document définit les embases mono-modules, utilisées dans la famille des connecteurs électriques rectangulaires modulaires, température d'utilisation 175 °C continu. Les fiches correspondant à ces embases sont définies dans l’EN 4165-024. Les accessoires et bouchons de vol correspondant à ces fiches sont définis dans l’EN 4165-026. La cavité de ce connecteur n'est pas codée. Ainsi, il peut accepter les modules détrompés N, A, B, C et D comme défini dans l'EN 4165-002.
Aeronavtika - Konektorji, električni, pravokotni, modularni - Stalna delovna temperatura 175 °C - 025. del: Enojna modulna priključna doza - Standard za proizvod
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 4165-025:2022
01-februar-2022
Aeronavtika - Konektorji, električni, pravokotni, modularni - Stalna delovna
temperatura 175 °C - 025. del: Enojna modulna priključna doza - Standard za
proizvod
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature
175 °C continuous - Part 025: Single module receptacle - Product standard
Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise -
Betriebstemperatur 175 °C konstant - Teil 025: Fester Steckverbinder für Einzelmodul -
Produktnorm
Série aérospatiale - Connecteurs électriques rectangulaires modulaires - Température
d'utilisation 175 °C continu - Partie 025 : Embase mono module - Norme de produit
Ta slovenski standard je istoveten z: prEN 4165-025
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 4165-025:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 4165-025:2022
---------------------- Page: 2 ----------------------
oSIST prEN 4165-025:2022
DRAFT
EUROPEAN STANDARD
prEN 4165-025
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2021
ICS 49.060 Will supersede EN 4165-025:2017
English Version
Aerospace series - Connectors, electrical, rectangular,
modular - Operating temperature 175 °C continuous -
Part 025: Single module receptacle - Product standard
Série aérospatiale - Connecteurs électriques Luft- und Raumfahrt - Elektrischer
rectangulaires modulaires - Température d'utilisation Rechtecksteckverbinder in modularer Bauweise -
175 °C continu - Partie 025 : Embase mono module - Betriebstemperatur 175 °C konstant - Teil 025: Fester
Norme de produit Steckverbinder für Einzelmodul - Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N
EUROPÄISCHES KOMITEE FÜR NORMUN G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4165-025:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 4165-025:2022
prEN 4165-025:2021 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
4.1 Single module flange receptacle design (short receptacle) Type 0 . 4
4.2 Single module jack receptacle (extender) design (long receptacle) Type 7 . 9
4.3 Single module extender rear accessory attachment design for Type 7 only . 14
4.4 Class . 17
4.5 Panel cut-out . 17
4.6 Additional parts . 20
4.6.1 Colour coding plate (Type code C) . 20
4.6.2 Nut plate (Type code D) . 23
4.6.3 Sealing gasket (Type code E) . 24
5 Designation . 25
5.1 Designation of receptacle . 25
5.2 Designation of colour coding plate . 26
5.3 Designation of nut plate . 26
5.4 Designation of sealing gasket . 26
6 Marking . 27
7 Technical specification . 27
8 Mounting example . 27
Bibliography . 28
2
---------------------- Page: 4 ----------------------
oSIST prEN 4165-025:2022
prEN 4165-025:2021 (E)
European foreword
This document (prEN 4165-025:2021) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 4165-025:2017.
3
---------------------- Page: 5 ----------------------
oSIST prEN 4165-025:2022
prEN 4165-025:2021 (E)
1 Scope
This document defines the single module receptacle used in the family of rectangular electrical
connectors. The plug corresponding to this receptacle is defined in EN 4165-024. Accessories and
protective cover corresponding to those plugs are defined in EN 4165-026. The cavity of this connector
is uncoded, so it can accept polarized modules N, A, B, C and D as defined in EN 4165-002.
2 Normative references
The following documents are referred to in the text in such a way that some or a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.