kSIST FprEN 303 883-2 V2.1.1:2024
(Main)Short Range Devices (SRD) and Ultra Wide Band (UWB) - Part 2: Measurement techniques for receiver requirements
Short Range Devices (SRD) and Ultra Wide Band (UWB) - Part 2: Measurement techniques for receiver requirements
REN/ERM-TGUWB-619
Naprave kratkega dosega (SRD) in ultra širokopasovna (UWB) tehnologija - 2. del: Merilne tehnike za zahteve sprejemnika
General Information
Buy Standard
Standards Content (Sample)
Draft ETSI EN 303 883-2 V2.1.0 (2024-01)
EUROPEAN STANDARD
Short Range Devices (SRD)
and Ultra Wide Band (UWB);
Part 2: Measurement techniques
for receiver requirements
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 303 883-2 V2.1.0 (2024-01)
Reference
REN/ERM-TGUWB-619
Keywords
measurement, receiver, testing, UWB
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
https://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2024.
All rights reserved.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 303 883-2 V2.1.0 (2024-01)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 6
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 8
3 Definition of terms, symbols and abbreviations . 9
3.1 Terms .
...
SLOVENSKI STANDARD
oSIST prEN 303 883-2 V2.1.0:2024
01-marec-2024
Naprave kratkega dosega (SRD) in ultra širokopasovna (UWB) tehnologija - 2. del:
Merilne tehnike za zahteve sprejemnika
Short Range Devices (SRD) and Ultra Wide Band (UWB) - Part 2: Measurement
techniques for receiver requirements
Ta slovenski standard je istoveten z: ETSI EN 303 883-2 V2.1.0 (2024-01)
ICS:
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
oSIST prEN 303 883-2 V2.1.0:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 303 883-2 V2.1.0:2024
---------------------- Page: 2 ----------------------
oSIST prEN 303 883-2 V2.1.0:2024
Draft ETSI EN 303 883-2 V2.1.0 (2024-01)
EUROPEAN STANDARD
Short Range Devices (SRD)
and Ultra Wide Band (UWB);
Part 2: Measurement techniques
for receiver requirements
---------------------- Page: 3 ----------------------
oSIST prEN 303 883-2 V2.1.0:2024
2 Draft ETSI EN 303 883-2 V2.1.0 (2024-01)
Reference
REN/ERM-TGUWB-619
Keywords
measurement, receiver, testing, UWB
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
https://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2024.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
oSIST prEN 303 883-2 V2.1.0:2024
3 Draft ETSI EN 303 883-2 V2.1.0 (2024-01)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 6
Introduction . 7
1 Scope .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.