SIST EN 3475-405:2004
(Main)Aerospace series - Cables, electrical, aircraft use - Test methods - Part 405: Bending at ambient temperature
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 405: Bending at ambient temperature
This standard specifies a method of determining the behaviour of a cable after a bend test at ambient temperature.
It shall be used together with EN 3475-100.
Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrt, Verwendung - Prüfverfahren - Teil 405: Biegen bei Raumtemperatur
Diese Norm legt ein Verfahren zur Bestimmung des Verhaltens einer Leitung nach einer Biegeprüfung bei Raumtemperatur fest.
Sie ist in Verbindung mit EN 3475-100 anzuwenden.
Série aérospatiale - Câbles électriques a usage aéronautique - Méthodes d'essai - Partie 405: Courbure a la température ambiante
Cette norme définit une méthode pour déterminer le comportement d'un câble apres un essai de courbure a la température ambiante.
Elle doit etre utilisée conjointement avec EN 3475-100.
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 405: Bending at ambient temperature
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Cables, electrical, aircraft use - Test methods - Part 405: Bending at ambient temperatureLuft- und Raumfahrt - Elektrische Leitungen für Luftfahrt, Verwendung - Prüfverfahren - Teil 405: Biegen bei RaumtemperaturSérie aérospatiale - Câbles électriques a usage aéronautique - Méthodes d'essai - Partie 405: Courbure a la température ambianteAerospace series - Cables, electrical, aircraft use - Test methods - Part 405: Bending at ambient temperature49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3475-405:2002SIST EN 3475-405:2004en01-maj-2004SIST EN 3475-405:2004SLOVENSKI
STANDARD
SIST EN 3475-405:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3475-405January 2002ICS 49.060English versionAerospace series - Cables, electrical, aircraft use - Testmethods - Part 405: Bending at ambient temperatureSérie aérospatiale - Câbles électriques à usageaéronautique - Méthodes d'essai - Partie 405: Courbure àla température ambianteLuft- und Raumfahrt - Elektrische Leitungen für Luftfahrt,Verwendung - Prüfverfahren - Teil 405: Biegen beiRaumtemperaturThis European Standard was approved by CEN on 6 August 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3475-405:2002 ESIST EN 3475-405:2004
EN 3475-405:2002 (E)2ForewordThis document (EN 3475-405:2002) has been prepared by the European Associati
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.