SIST EN 2591-218:2004
(Main)Aerospace series - Elements of electrical and optical connection - Test methods - Part 218: Ageing of terminal lugs and in-line splices by temperature and current cycling
Aerospace series - Elements of electrical and optical connection - Test methods - Part 218: Ageing of terminal lugs and in-line splices by temperature and current cycling
This standard specifies a method for ageing terminal lugs and in-line splices by temperature and current cycling.
It shall be used together with EN 2591-100.
Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 218: Alterung von Kabelschuhen und Stoßverbindern durch zyklische Temperatur- und Strombelastung
Diese Norm legt ein Verfahren zur Alterung von Kabelschuhen und Stoßverbindern durch zyklische Temperatur- und Strombelastung fest.
Sie ist in Verbindung mit EN 2591-100 anzuwenden.
Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 218: Vieillissement des cosses et des prolongateurs par cyclage en température et en courant
Aerospace series - Elements of electrical and optical connection - Test methods - Part 218: Ageing of terminal lugs and in-line splices by temperature and current cycling
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Elements of electrical and optical connection - Test methods - Part 218: Ageing of terminal lugs and in-line splices by temperature and current cyclingLuft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 218: Alterung von Kabelschuhen und Stoßverbindern durch zyklische Temperatur- und StrombelastungSérie aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 218: Vieillissement des cosses et des prolongateurs par cyclage en température et en courantAerospace series - Elements of electrical and optical connection - Test methods - Part 218: Ageing of terminal lugs and in-line splices by temperature and current cycling49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2591-218:2002SIST EN 2591-218:2004en01-maj-2004SIST EN 2591-218:2004SLOVENSKI
STANDARD
SIST EN 2591-218:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2591-218June 2002ICS 49.060English versionAerospace series - Elements of electrical and optical connection- Test methods - Part 218: Ageing of terminal lugs and in-linesplices by temperature and current cyclingSérie aérospatiale - Organes de connexion électrique etoptique - Méthodes d'essais - Partie 218: Vieillissementdes cosses et des prolongateurs par cyclage entempérature et en courantLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Prüfverfahren - Teil 218: Alterungvon Kabelschuhen und Stoßverbindern durch zyklischeTemperatur- und StrombelastungThis European Standard was approved by CEN on 8 February 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2591-218:2002 ESIST EN 2591-218:2004
EN 2591-218:2002 (E)2ForewordThis document (EN 2591-218:2002) has been prepared by the European Association of AerospaceManufacturers (AECMA).After enquiries and votes carried out in accordance with the rules of this Association, this Standard hasreceived the approval of the National Associations and the Official Services of the member countries ofAECMA, prior to its presentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by December 2002, and conflicting national standards shall bewithdrawn at the latest by December 2002.According to the CEN/CENELEC Internal Regulations, th
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.