SIST EN 301 004-2 V1.1.2:2005

• Abstract:

  PICS for published part 1. Supporting members: Alcatel, Swisscom, BT, OTE.

• Status: Published
• Publication Date: 31-Dec-2004
• ICS: 33.080 - Integrated Services Digital Network (ISDN)
• Technical Committee: SPN - Services and Protocols for Networks
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jan-2005
• Due Date: 01-Jan-2005
• Completion Date: 01-Jan-2005
• Ref Project: ETSI EN 301 004-2 V1.1.2 (2000-01) - Broadband Integrated Services Digital Network (B-ISDN); Signalling System No.7; Message Transfer Part (MTP) level 3 functions and messages to support international interconnection; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification

SIST EN 301 004-2 V1.1.2:2005 is the PICS proforma standard for Broadband Integrated Services Digital Network (B-ISDN) Signalling System No.7 Message Transfer Part (MTP) level 3. Published by ETSI and adopted by SIST, it tells a supplier how to document which MTP level 3 functions, timers, messages and maintenance procedures an implementation supports when claiming conformance to EN 301 004-1.

What does SIST EN 301 004-2 V1.1.2:2005 specify?

SIST EN 301 004-2 V1.1.2:2005 specifies the Protocol Implementation Conformance Statement (PICS) proforma for MTP level 3 functions and messages used for international interconnection. It is the companion to the protocol specification in EN 301 004-1 and follows the PICS guidance of ISO/IEC 9646-7.

The document is organized into four clauses and one normative annex:

• Scope
• References
• Definitions, symbols and abbreviations
• Conformance
• Annex A - PICS proforma for EN 301 004-1 based on ETS 300 008-1

Annex A is the practical heart of the document. It is the form a supplier completes to identify the implementation, state supported capabilities, and record conformance.

What are the key requirements of SIST EN 301 004-2 V1.1.2:2005?

Completing the PICS

Annex A requires the supplier to fill in identification data for the Implementation Under Test (IUT), the System Under Test (SUT), the product supplier, the client if different, and a PICS contact person. In practice, this lets a test lab or buyer link the statement to one specific product build and configuration.

Clause 4 requires a conforming PICS to be technically equivalent to Annex A and to keep the numbering and order of the items. This matters because the form is meant to be comparable across suppliers and usable as a structured conformance record.

Stating conformance clearly

Annex A asks a direct global question: are all mandatory capabilities implemented? A negative answer means non-conformance to the protocol specification, and any unsupported mandatory capability must be identified and explained. This makes the result unambiguous for audits, acceptance testing, and procurement checks.

Marking capability status correctly

The tables in Annex A use status codes such as mandatory, optional, not applicable, excluded, and conditional. The supplier marks each item as supported or not supported and may add comments where needed. This is what turns the questionnaire into a readable statement of actual product behavior.

Covering the right MTP level 3 functions

Annex A groups the PICS around major MTP level 3 capability areas: signalling message handling, signalling network management, signalling traffic management, changeover, changeback, forced rerouting, controlled rerouting, MTP restart, management inhibiting, signalling traffic flow control, signalling link management, signalling route management, spare field handling, testing and maintenance procedures, and protocol error handling. For a reader, this shows the exact operational areas that must be checked before claiming support.

Recording timers, messages, and maintenance behavior

Annex A also asks the supplier to state support for MTP level 3 timers and their supported values or ranges, plus support for MTP level 3 messages in sending and receiving directions. It further covers testing and maintenance procedures and the associated SLTM and SLTA messages. That gives testers concrete items to verify, rather than a general claim of compatibility.

Handling conditional and option-dependent items

Some items in Annex A are conditional on other choices, using the document’s own predicates and selection rules. In practice, this avoids forcing answers for features that only apply when another option is enabled, which is important when one implementation supports multiple profiles or configurations.

What terms does SIST EN 301 004-2 V1.1.2:2005 define?

• Implementation Conformance Statement (ICS) - a supplier’s statement of which capabilities an implementation supports against a specification.
• Protocol Implementation Conformance Statement (PICS) - an ICS for a claimed-conforming protocol implementation.
• PICS proforma - the questionnaire that becomes a PICS when completed for a specific implementation.
• Implementation Under Test (IUT) - the implementation being described or tested.
• System Under Test (SUT) - the system that contains the IUT.
• Message Transfer Part (MTP) level 3 - the SS7 layer covered here, responsible for routing, discrimination, distribution, network management, and related procedures.

Who uses SIST EN 301 004-2 V1.1.2:2005?

SIST EN 301 004-2 V1.1.2:2005 is used by suppliers of SS7 or B-ISDN signalling equipment, especially when they claim conformance to EN 301 004-1. It is also used by conformance test labs, integrators, network operators, and quality or procurement teams that need a structured way to compare supported functions, timers, and messages.

What changed in SIST EN 301 004-2 V1.1.2:2005 from the previous edition?

The document history shows V1.1.2 as the publication version and V1.1.1 as the earlier version in August 1999. This issue is the published V1.1.2 edition of the PICS proforma.

Which standards are used with SIST EN 301 004-2 V1.1.2:2005?

Reference	What it contributes
EN 301 004-1	The base protocol specification that the PICS describes.
ETS 300 008-1	The earlier SS7 MTP specification on which EN 301 004-1 is based.
ISO/IEC 9646-1	General conformance testing concepts and framework.
ISO/IEC 9646-7	The rules for PICS and other implementation conformance statements.
ITU-T Recommendation Q.701	Functional description of MTP and error handling.
ITU-T Recommendation Q.704	Signalling network functions, messages, timers, and major procedures.
CCITT Recommendation Q.707	Testing and maintenance procedures and related timers/messages.
ITU-T Recommendation Q.2210	MTP level 3 functions and messages using ITU-T Recommendation Q.2140 services.

What does the SIST EN 301 004-2 V1.1.2:2005 document contain?

Annex A is a reusable questionnaire with identification fields, a global conformance question, and detailed capability tables. Those tables cover MTP level 3 functions, timers, message support, testing and maintenance, and protocol error handling.

The annex uses support columns, allowed-value fields, and comment spaces so the completed PICS can record exactly what the implementation supports. That structure is useful for design verification, conformance testing, certification evidence, and supplier comparison.

The document also gives the completion rules and notation, including how to treat mandatory, optional, conditional, excluded, and not-applicable items. In practice, that helps the person completing the form answer consistently and helps the reviewer interpret the result.

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VNODGQRVWLBroadband Integrated Services Digital Network (B-ISDN); Signalling System No.7; Message Transfer Part (MTP) level 3 functions and messages to support international interconnection; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:EN 301 004-2 Version 1.1.2SIST EN 301 004-2 V1.1.2:2005en01-januar-2005SIST EN 301 004-2 V1.1.2:2005SLOVENSKI
STANDARD
ETSIEN301004-2V1.1.2(2000-01)EuropeanStandard(Telecommunicationsseries)BroadbandIntegratedServicesDigitalNetwork(B-ISDN);SignallingSystemNo.7;MessageTransferPart(MTP)level3functionsandmessagestosupportinternationalinterconnection;Part2:ProtocolImplementationConformanceStatement(PICS)proformaspecificationSIST EN 301 004-2 V1.1.2:2005

ETSIETSIEN301004-2V1.1.2(2000-01)2ReferenceDEN/SPS-01075-2KeywordsB-ISDN,PICS,MTP,SS7ETSIPostaladdressF-06921SophiaAntipolisCedex-FRANCEOfficeaddress650RoutedesLucioles-SophiaAntipolisValbonne-FRANCETel.:[phone]Fax:[phone]SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/[e-mail]ETSIdeliverablecanbedownloadedfromhttp://www.etsi.orgIfyoufinderrorsinthepresentdocument,sendyourcommentto:[e-mail]Ideliverablemaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.CopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2000.Allrightsreserved.SIST EN 301 004-2 V1.1.2:2005

ETSIETSIEN301004-2V1.1.2(2000-01)3ContentsIntellectualPropertyRights.4Foreword.4Introduction.41Scope.52References.53Definitions,symbolsandabbreviations.63.1Definitions.63.2Symbols.63.3Abbreviations.64Conformance.6AnnexA(normative):PICSproformaforEN301004-1basedonETS300008-1.7A.1GuidanceforcompletingthePICSproforma.7A.1.1Purposesandstructure.7A.1.2Abbreviationsandconventions.7A.1.3InstructionsforcompletingthePICSproforma.9A.2Identificationoftheimplementation.9A.2.1Dateofthestatement.9A.2.2ImplementationUnderTest(IUT)identification.9A.2.3SystemUnderTest(SUT)identification.10A.2.4Productsupplier.10A.2.5Client(ifdifferentfromproductsupplier).10A.2.6PICScontactperson.11A.3Identificationoftheprotocol.11A.4Globalstatementofconformance.12A.5Capabilities.12A.5.1Majorcapabilities-MTPlevel3.12A.5.2TimersusedinMTPlevel3.18A.5.3MessagesusedinMTPlevel3.18A.5.4Testingandmaintenanceprocedures.20A.5.4.1Majorcapabilitiesintestingandmaintenanceprocedures.20A.5.4.2Timersusedintestingandmaintenanceprocedures.20A.5.4.3Messagesusedintestingandmaintenanceprocedures.20A.5.5Protocolerrorhandling.21History.22SIST EN 301 004-2 V1.1.2:2005

ETSIETSIEN301004-2V1.1.2(2000-01)4IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinSR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinSR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSITechnicalCommitteeServicesProtocolsforAdvancedNetworks(SPAN).Thepresentdocumentispart2ofamulti-partENcoveringtheBroadbandIntegratedServicesDigitalNetwork(B-ISDN);SignallingSystemNo.7;MessagesTransferPart(MTP)level3functionsandmessagestosupportinternationalinterconnection,asidentifiedbelow:Part1:"Protocolspecification[ITU-TRecommendationQ.2210(1996),modified]";Part2:"ProtocolImplementationConformanceStatement(PICS)proformaspecification".NationaltranspositiondatesDateofadoptionofthisEN:17December1999DateoflatestannouncementofthisEN(doa):31March2000DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):30September2000DateofwithdrawalofanyconflictingNationalStandard(dow):30September2000IntroductionToevaluateconformanceofaparticularimplementation,itisnecessarytohaveastatementofwhichcapabilitiesandoptionshavebeenimplementedforagivenOSIprotocol.SuchastatementiscalledaProtocolImplementationConformanceStatement(PICS).SIST EN 301 004-2 V1.1.2:2005

ETSIETSIEN301004-2V1.1.2(2000-01)51ScopeThepresentdocumentprovidestheProtocolImplementationConformanceStatement(PICS)proformaforMessageTransferPart(MTP)level3functionsandmessages,signallingprotocolofSignallingSystemNo.7forusebetweenand,optionally,inpublicnetworksasspecifiedinEN301004-1[1]basedonETS300008-1[2]incompliancewiththerelevantrequirementsandinaccordancewiththerelevantguidancegiveninISO/IEC9646-7[4].ThesupplierofaprotocolimplementationthatisclaimedtoconformtoEN301004-1[1]basedonETS300008-1[2]isrequiredtocompleteacopyofthePICSproformaprovidedinannexAofthepresentdocumentandisrequiredtoprovidetheinformationnecessarytoidentifyboththesupplierandtheimplementation.2ReferencesThefollowingdocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthepresentdocument.•Referencesareeitherspecific(identifiedbydateofpublication,editionnumber,versionnumber,etc.)ornon-specific.•Foraspecificreference,subsequentrevisionsdonotapply.•Foranon-specificreference,thelatestversionapplies.•Anon-specificreferencetoanETSshallalsobetakentorefertolaterversionspublishedasanENwiththesamenumber.[1]EN301004-1(V1.1):"BroadbandIntegratedServicesDigitalNetwork(B-ISDN);SignallingSystemNo.7;MessageTransferPart(MTP)level3functionsandmessagestosupportinternationalinterconnection;Part1:Protocolspecification[ITU-TRecommendationQ.2210(1996),modified]".[2]ETS300008-1:"IntegratedServicesDigitalNetwork(ISDN);SignallingSystemNo.7;MessageTransferPart(MTP)tosupportinternationalinterconnection;Part1:Protocolspecification[ITU-TRecommendationsQ.701(1993),Q.702(1988),Q.703toQ.706(1993),modified]".[3]ISO/IEC9646-1(1994):"Informationtechnology;OpenSystemsInterconnection;Conformancetestingmethodologyandframework;Part1:Generalconcepts".[4]ISO/IEC9646-7(1995):"Informationtechnology;OpenSystemsInterconnection;Conformancetestingmethodologyandframework;Part7:ImplementationConformanceStatements".[5]ITU-TRecommendationQ.701(1993):"Functionaldescriptionofthemessagetransferpart(MTP)ofSignallingSystemNo.7".[6]ITU-TRecommendationQ.704(1996):"Signallingnetworkfunctionsandmessages".[7]CCITTRecommendationQ.707(1988):"Testingandmaintenance".[8]ITU-TRecommendationQ.2210(1996):"Messagetransferpartlevel3functionsandmessagesusingtheservicesofITU-TRecommendationQ.2140".SIST EN 301 004-2 V1.1.2:2005

ETSIETSIEN301004-2V1.1.2(2000-01)63Definitions,symbolsandabbreviations3.1DefinitionsForthepurposesofthepresentdocument,thedefinitionsinEN301004-1[1],ISO/IEC9646-1[3]andSO/IEC9646-7[4]apply.Inparticular,thefollowingtermsdefinedinISO/IEC9646-1[3]apply:ImplementationConformanceStatement(ICS):statementmadebythesupplierofanimplementationorsystemclaimedtoconformtoagivenspecification,statingwhichcapabilitieshavebeenimplemented.TheICScantakeseveralforms:protocolICS(PICS),profileICS,profilespecificICS,andinformationobjectICS.ProtocolImplementationConformanceStatement(PICS):ICSforanimplementationorsystemclaimedtoconformtoagivenprotocolspecification.PICSproforma:document,intheformofaquestionnaire,whichwhencompletedforanimplementationorsystembecomesaPICS.3.2SymbolsForthepurposesofthepresentdocument,thefollowingsymbolsapply:cConditionaln/aNotApplicableoOptionalo.Optional,but,ifchosen,supportisrequiredforeitheratleastoneoronlyoneoftheoptionsinthegrouplabelledbythesamenumeralxExcluded3.3AbbreviationsForthepurposesofthepresentdocument,thefollowingabbreviationsapply:B-ISDNBroadbandIntegratedServicesDigitalNetworkDPCDestinationPointCodeICSImplementationConformanceStatementMTPMessagesTransferPartOPCOriginatingPointCodeOSIOpenSystemInterconnectionPICSProtocolImplementationConformanceStatement4ConformanceAPICSproformathatconformstothisPICSproformaspecificationshallbetechnicallyequivalenttoannexA,andshallpreservethenumberingandorderingoftheitemsinannexA.APICSthatconformstothisPICSproformaspecificationshall:a)describeanimplementationwhichconformstoEN301004-1[1]basedonETS300008-1[2];b)beaconformingPICSproforma,whichhasbeencompletedinaccordancewiththeinstructionsforcompletiongiveninclauseA.1;c)includetheinformationnecessarytouniquelyidentifyboththesupplierandtheimplementation.SIST EN 301 004-2 V1.1.2:2005

ETSIETSIEN301004-2V1.1.2(2000-01)7AnnexA(normative):PICSproformaforEN301004-1basedonETS300008-1Notwithstandingtheprovisionsofthecopyrightclauserelatedtothetextofthepresentdocument,ETSIgrantsthatusersofthepresentdocumentmayfreelyreproducethePICSproformainthisannexsothatitcanbeusedforitsintendedpurposesandmayfurtherpublishthecompletedPICS.A.1GuidanceforcompletingthePICSproformaA.1.1PurposesandstructureThepurposeofthisPICSproformaistoprovideamechanismwherebyasupplierofanimplementationoftherequirementsdefinedinEN301004-1basedonETS300008-1mayprovideinformationabouttheimplementationinastandardizedmanner.ThePICSproformaissubdividedintosubclausesforthefollowingcategoriesofinformation:-guidanceforcompletingthePICSproforma;-identificationoftheimplementation;-identificationoftheETS;-globalstatementofconformance;-capabilities.A.1.2AbbreviationsandconventionsThePICSproformacontainedinthisannexiscomprisedofinformationintabularforminaccordancewiththeguidelinespresentedinISO/IEC9646-7.ItemcolumnTheitemcolumncontainsanumberwhichidentifiestheiteminthetable.ItemdescriptioncolumnTheitemdescriptioncolumndescribesinfreetexteachrespectiveitem(e.g.parameters,timers,etc.).Itimplicitlymeans"issupportedbytheimplementation?".StatuscolumnThefollowingnotations,definedinISO/IEC9646-7,areusedforthestatuscolumn:mmandatory-thecapabilityisrequiredtobesupported;ooptional-thecapabilitymaybesupportedornot;n/anotapplicable-inthegivencontext,itisimpossibletousethecapability;xprohibited(excluded)-thereisarequirementnottousethiscapabilityinthegivencontext;ioutofscope("i"standsforirrelevant)-thiscapabilityisoutsidethescopeofthegivenbasestandardandhenceirrelevantandnotsubjecttoconformancetesting.Noanswerisrequestedfromthesupplier;SIST EN 301 004-2 V1.1.2:2005

ETSIETSIEN301004-2V1.1.2(2000-01)8o.iqualifiedoptional-formutuallyexclusiveorselectableoptionsfromaset."i"isanintegerwhichidentifiesanuniquegroupofrelatedoptionalitemsandthelogicoftheirselectionwhichisdefinedimmediatelyfollowingthetable;ciconditional-therequirementonthecapability("m","o","x"or"n/a")dependsonthesupportofotheroptionalorconditionalitems."i"isanintegeridentifyinganuniqueconditionalstatusexpressionwhichisdefinedimmediatelyfollowingthetable.ReferencecolumnThereferencecolumnmakesreferencetoEN301004-1basedonETS300008-1,exceptwhereexplicitlystatedotherwise.SupportcolumnThesupportcolumnshallbefilledinbythesupplieroftheimplementation.Thefollowingcommonnotations,definedinISO/IEC9646-7,areusedforthesupportcolumn:Yorysupportedbytheimplementation;Nornnotsupportedbytheimplementation;N/A,n/aor-noanswerrequired(allowedonlyifthestatusisn/a,directlyorafterevaluationofaconditionalstatus).IfthisPICSproformaiscompletedinordertodescribeamultiple-profilesupportinasystem,itisnecessarytobeabletoanswerthatacapabilityissupportedforoneprofileandnotsupportedforanother.Inthatcase,thesuppliershallentertheuniquereferencetoaconditionalexpression,precededby"?"(e.g.?3).Thisexpressionshallbegiveninthespaceforcommentsprovidedatthebottomofthetable.ItusespredicatesdefinedintheSCS,eachofwhichreferstoasingleprofileandwhichtakesthevalueTRUEifandonlyifthatprofileistobeused.EXAMPLE:?3:IFprof1THENYELSEN.Itisalsopossibletoprovideacommenttoananswerinthespaceprovidedatthebottomofthetable.NOTE:AsstatedinISO/IEC9646-7,supportforareceivedPDUrequirestheabilitytoparseallvalidparametersofthatPDU.SupportingaPDUwhilehavingnoabilitytoparseavalidparameterisnon-conformant.SupportforaparameteronaPDUmeansthatthesemanticsofthatparameteraresupported.UnlessspecificallycoveredbyatablelistingPDUparametersandgivingdetailsregardingtheirstatus,allparametersofaPDUarerequiredtobefullysupportedonsending.SupportofaPDUthereforeimpliesfullsupportofallrequiredPDUparameters.ValuesallowedcolumnThevaluesallowedcolumncontainsthetype,thelist,therange,orthelengthofvaluesallowed.Thefollowingnotationsareused:-rangeofvalues:.;example:5.20;-listofvalues:,,.,;example:2,4,6,8,9;example:'1101'B,'1011'B,'1111'B;example:'0A'H,'34'H,'2F'H;-listofnamedvalues:(),(),.,(;example:reject(1),accept(2);-length:size(.);example:size(1.8).SIST EN 301 004-2 V1.1.2:2005

ETSIETSIEN301004-2V1.1.2(2000-01)9ValuessupportedcolumnThevaluessupportedcolumnshallbefilledinbythesupplieroftheimplementation.Inthiscolumn,thevaluesortherangesofvaluessupportedbytheimplementationshallbeindicated.ReferencestoitemsForeachpossibleitemanswer(answerinthesupportcolumn)withinthePICSproformaauniquereferenceexists,used,forexample,intheconditionalexpressions.Itisdefinedasthetableidentifier,followedbyasolidscharacter"/",followedbytheitemnumberinthetable.Ifthereismorethanonesupportcolumninatable,thecolumnsarediscriminatedbyletters(a,b,etc.),respectively.EXAMPLE1:A.5/4isthereferencetotheanswerofitem4intable5ofannexA.EXAMPLE2:A.6/3bisthereferencetothesecondanswer(i.e.inthesecondsupportcolumn)ofitem3intable6ofannexA.PrerequisitelineAprerequisitelinetakestheform:Prerequisite:.AprerequisitelineafteraclauseortabletitleindicatesthatthewholeclauseorthewholetableisnotrequiredtobecompletedifthepredicateisFALSE.A.1.3InstructionsforcompletingthePICSproformaThesupplieroftheimplementationshallcompletethePICSproformaineachofthespacesprovided.Inparticular,anexplicitanswershallbeentered,ineachofthesupportorsupportedcolumnboxesprovided,usingthenotationdescribedinsubclauseA.1.2.Ifnecessary,thesuppliermayprovideadditionalcommentsinspaceatthebottomofthetables,orseparatelyonsheetsofpaper.MoredetailedinstructionsaregivenatthebeginningofthedifferentsubclausesofthePICSproforma.A.2IdentificationoftheimplementationIdentificationoftheImplementationUnderTest(IUT)andthesysteminwhichitresides(theSystemUnderTest(SUT)shouldbefilledinsoastoprovideasmuchdetailaspossibleregardingversionnumbersandconfigurationoptions.Theproductsupplierinformationandclientinformationshouldbothbefillediniftheyaredifferent.ApersonwhocananswerqueriesregardinginformationsuppliedinthePICSshouldbenamedasthecontactperson.A.2.1Dateofthestatement.A.2.2ImplementationUnderTest(IUT)identificationIUTname:.IUTversion:.SIST EN 301 004-2 V1.1.2:2005

ETSIETSIEN301004-2V1.1.2(2000-01)10A.2.3SystemUnderTest(SUT)identificationSUTname:.Hardwareconfiguration:.Operatingsystem:.A.2.4ProductsupplierName:.Address:.Telephonenumber:.Facsimilenumber:.E-mailaddress:.Additionalinformation:.A.2.5Client(ifdifferentfromproductsupplier)Name:.Address:.SIST EN 301 004-2 V1.1.2:2005

ETSIETSIEN301004-2V1.1.2(2000-01)11Telephonenumber:.Facsimilenumber:.E-mailaddress:.Additionalinformation:.
...