SIST EN ISO 6874:2015
(Main)Dentistry - Polymer-based pit and fissure sealants (ISO 6874:2015)
Dentistry - Polymer-based pit and fissure sealants (ISO 6874:2015)
This International Standard specifies requirements and test methods for polymer-based materials
intended for sealing pits and fissures in teeth.
This International Standard covers both self-curing and external-energy-activated materials.
Zahnheilkunde - Versiegelungskunststoffe für Grübchen und Fissuren (ISO 6874:2015)
Médecine bucco-dentaire - Produits dentaires à base de polymères pour comblement des puits et fissures (ISO 6874:2015)
L'ISO 6874:2015 fixe les exigences et spécifie les méthodes d'essai des produits à base de polymères destinés au scellement des puits et fissures des dents.
Elle couvre à la fois les produits autopolymérisables et les produits activés par une source externe d'énergie.
Zobozdravstvo - Tesnilna sredstva na osnovi polimerov za otiske in razpoke (ISO 6874:2015)
Ta mednarodni standard določa zahteve in preskusne metode za materiale na osnovi polimerov,
ki se uporabljajo kot tesnilna sredstva za otiske in razpoke v zobeh.
Ta mednarodni standard zajema tako samoozdravljive materiale, kot materiale, ki za aktivacijo potrebujejo zunanjo energijo.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 6874:2015
01-december-2015
1DGRPHãþD
SIST EN ISO 6874:2005
Zobozdravstvo - Tesnilna sredstva na osnovi polimerov za otiske in razpoke (ISO
6874:2015)
Dentistry - Polymer-based pit and fissure sealants (ISO 6874:2015)
Zahnheilkunde - Versiegelungskunststoffe für Grübchen und Fissuren (ISO 6874:2015)
Médecine bucco-dentaire - Produits dentaires à base de polymères pour comblement
des puits et fissures (ISO 6874:2015)
Ta slovenski standard je istoveten z: EN ISO 6874:2015
ICS:
11.060.10 =RERWHKQLþQLPDWHULDOL Dental materials
SIST EN ISO 6874:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 6874:2015
---------------------- Page: 2 ----------------------
SIST EN ISO 6874:2015
EN ISO 6874
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2015
EUROPÄISCHE NORM
ICS 11.060.10 Supersedes EN ISO 6874:2005
English Version
Dentistry - Polymer-based pit and fissure sealants (ISO
6874:2015)
Médecine bucco-dentaire - Produits dentaires à base de Zahnheilkunde - Versiegelungskunststoffe für
polymères pour comblement des puits et fissures (ISO Grübchen und Fissuren (ISO 6874:2015)
6874:2015)
This European Standard was approved by CEN on 10 July 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6874:2015 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 6874:2015
EN ISO 6874:2015 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 6874:2015
EN ISO 6874:2015 (E)
European foreword
This document (EN ISO 6874:2015) has been prepared by Technical Committee ISO/TC 106 "Dentistry"
in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which is held by
DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2016, and conflicting national standards shall
be withdrawn at the latest by March 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 6874:2005.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 6874:2015 has been approved by CEN as EN ISO 6874:2015 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 6874:2015
---------------------- Page: 6 ----------------------
SIST EN ISO 6874:2015
INTERNATIONAL ISO
STANDARD 6874
Third edition
2015-09-01
Dentistry — Polymer-based pit and
fissure sealants
Médecine bucco-dentaire — Produits dentaires à base de polymères
pour comblement des puits et fissures
Reference number
ISO 6874:2015(E)
©
ISO 2015
---------------------- Page: 7 ----------------------
SIST EN ISO 6874:2015
ISO 6874:2015(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 6874:2015
ISO 6874:2015(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Classification . 1
4 Requirements . 1
4.1 Biocompatibility . 1
4.2 Physical properties . 1
4.2.1 Working time, Class 1 sealant . 1
4.2.2 Setting time, Class 1 sealant . 1
4.2.3 Depth of cure, Class 2 sealant . 1
5 Sampling . 2
6 Test methods . 2
6.1 Inspection . 2
6.2 Test conditions . 2
6.3 Preparation of test specimens . 2
6.4 Working time, Class 1 sealant . 2
6.4.1 Apparatus . 2
6.4.2 Procedure . 4
6.4.3 Treatment of results. 4
6.5 Setting time, Class 1 sealant . 5
6.5.1 Apparatus . 5
6.5.2 Procedure . 5
6.5.3 Treatment of results. 5
6.6 Depth of cure, Class 2 sealant . 6
6.6.1 Apparatus . 6
6.6.2 Procedure . 6
6.6.3 Treatment of results. 6
7 Packaging, marking and instructions and information to be supplied by
the manufacturer . 6
7.1 Packaging . 7
7.2 Marking . 7
7.2.1 Capsule or single dose container . 7
7.2.2 Outer pack . 7
7.3 Manufacturer’s instructions and information for the user . 7
Bibliography . 9
© ISO 2015 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 6874:2015
ISO 6874:2015(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 106, Dentistry, Subcommittee SC1, Filling and
restorative materials.
This third edition cancels and replaces the second edition (ISO 6874:2005), of which it constitutes a
minor revision.
iv © ISO 2015 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 6874:2015
ISO 6874:2015(E)
Introduction
The efficacy of pit and fissure sealants for the prevention of dental caries is widely accepted. The
polymer-based materials intended for this purpose and covered by th
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.