iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN ISO 11908:2024

(Main)

Binders for paints and varnishes - Amino resins - General methods of test (ISO/DIS 11908:2024)

Binders for paints and varnishes - Amino resins - General methods of test (ISO/DIS 11908:2024)

Describes general test methods for amino resins and solutions of amino resins intended for use as binders in paints, varnishes and related products.

Bindemittel für Beschichtungsstoffe - Aminharze - Allgemeine Prüfverfahren (ISO/DIS 11908:2024)

Liants pour peintures et vernis - Résines aminoplastes - Méthodes générales d'essai (ISO/DIS 11908:2024)

Veziva za barve in lake - Amino smole - Splošne preskusne metode (ISO/DIS 11908:2024)

General Information

Status
Not Published
Public Enquiry End Date
02-Jul-2024
ICS
87.060.20 - Binders
Technical Committee
IBLP - Paints and varnishes
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
06-May-2024
Due Date
23-Sep-2024
Ref Project
prEN ISO 11908 - Binders for paints and varnishes - Amino resins - General methods of test (ISO/DIS 11908:2024)

Relations

Revises
SIST EN ISO 11908:1998 - Binders for paints and varnishes - Amino resins - General methods of test (ISO 11908:1996)
Effective Date
01-Jun-2024

Buy Standard

prEN ISO 11908:2024prEN ISO 11908:2024
PreviousNext
Draft
prEN ISO 11908:2024
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 11908:2024
01-junij-2024
Veziva za barve in lake - Amino smole - Splošne preskusne metode (ISO/DIS
11908:2024)
Binders for paints and varnishes - Amino resins - General methods of test (ISO/DIS
11908:2024)
Bindemittel für Beschichtungsstoffe - Aminharze - Allgemeine Prüfverfahren (ISO/DIS
11908:2024)
Liants pour peintures et vernis - Résines aminoplastes - Méthodes générales d'essai
(ISO/DIS 11908:2024)
Ta slovenski standard je istoveten z: prEN ISO 11908
ICS:
87.060.20 Veziva Binders
oSIST prEN ISO 11908:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 11908:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 11908:2024
DRAFT
International
Standard
ISO/DIS 11908
ISO/TC 35
Binders for paints and varnishes —
Secretariat: NEN
Amino resins — General methods of
Voting begins on:
test
2024-04-30
Liants pour peintures et vernis — Résines aminoplastes —
Voting terminates on:
Méthodes générales d'essai
2024-07-23
ICS: 87.060.20
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 11908:2024(en)
© ISO 2024

---------------------- Page: 3 ----------------------
oSIST prEN ISO 11908:2024
DRAFT
ISO/DIS 11908:2024(en)
International
Standard
ISO/DIS 11908
ISO/TC 35
Binders for paints and
Secretariat: NEN
varnishes — Amino resins —
Voting begins on:
General methods of test
Liants pour peintures et vernis — Résines aminoplastes —
Voting terminates on:
Méthodes générales d'essai
ICS: 87.060.20
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 11908:2024(en)
© ISO 2024
© ISO 2024 – All rights reserved
ii

---------------------- Page: 4 ----------------------
oSIST prEN ISO 11908:2024
ISO/DIS 11908:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Properties and test methods .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 7142:2023(Main)
Binders for paints and varnishes - Epoxy resins - General methods of test (ISO 7142:2023)
EN ISO 7142:2023

ISO 7142:2007 specifies general methods of test for epoxy resins for use in paints, varnishes and similar products. It is also applicable to those solutions made from epoxy resins that are intended for use as binders for paints and varnishes.
The test methods described are not intended for epoxy esters.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13885-2:2021(Main)
Gel permeation chromatography (GPC) - Part 2: N,N-Dimethylacetamide (DMAC) as eluent (ISO 13885-2:2020)
EN ISO 13885-2:2021

This document specifies the determination of the molar-mass distribution and the average molar mass values Mn (number average) and Mw (weight average) of polymers that are soluble in DMAC (N,N-Dimethylacetamide) by gel permeation chromatography (GPC).
NOTE   Also known as size exclusion chromatography (SEC).
Even though the chromatograms obtained show good repeatability, it is possible that this method cannot be used with certain polymer types because of specific interactions (e.g. adsorption) within the sample/eluent/column system.
The conditions specified in this document are not applicable to the GPC analysis of polymer samples with Mw values greater than 106 g/mol and/or polymers with elution limits outside the calibration range (see 7.6 and Annex C).
This document includes no correction method (e.g. for the elimination of peak broadening). If absolute molar mass values are required, an absolute method (e.g. membrane osmometry for Mn or light scattering for Mw) can be used.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13885-1:2021(Main)
Gel permeation chromatography (GPC) - Part 1: Tetrahydrofuran (THF) as eluent (ISO 13885-1:2020)
EN ISO 13885-1:2021

This document specifies the determination of the molar-mass distribution and the average molar mass values Mn (number average) and Mw (weight average) of polymers that are soluble in tetrahydrofuran (THF) by gel permeation chromatography (GPC).
NOTE   Also known as size exclusion chromatography (SEC).
Even though the chromatograms obtained show good repeatability, it is possible that this method cannot be used with certain polymer types because of specific interactions (e.g. adsorption) within the sample/eluent/column system.
The conditions specified in this document are not applicable to the GPC analysis of polymer samples with Mw values greater than 106 g/mol and/or of polymers with elution limits outside the calibration range (see 7.6 and Annex C).
This document includes no correction method (e.g. for the elimination of peak broadening. If absolute molar-mass values are required, an absolute method (e.g. membrane osmometry for Mn or light scattering for Mw) can be used.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13885-3:2021(Main)
Gel permeation chromatography (GPC) - Part 3: Water as eluent (ISO 13885-3:2020)
EN ISO 13885-3:2021

This document specifies the determination of the molar-mass distribution and the average molar mass values Mn (number average) and Mw (weight average) of polymers that are soluble in water by gel permeation chromatography (GPC).
NOTE   Also known as size exclusion chromatography (SEC).
This method is applicable to neutral polymers and polyanions (e.g. polycarboxylates, polysaccharides, fully hydrolyzed polyvinyl alcohols and high-molecular polyethylene oxides). It is not applicable to polycations [e.g. polyvinylpyrrolidone, polyvinylpyridine, salts of poly(diallyl N,N dimethyl azacyclopentane), chitosan].
Despite good solubility in the mobile phase and even though the chromatograms obtained show good repeatability, it is possible that this method cannot be used with certain polymer types because of specific interactions (e.g. adsorption) within the sample/eluent/column system (see also Clause 12).
The conditions specified in this document are not applicable to the GPC analysis of polymer samples with Mw values greater than 106 g/mol and/or polymers with elution limits outside the calibration range (see 7.6 and Annex C).
This document includes no correction methods (e.g. for the elimination of peak broadening). If absolute molar mass values are required, an absolute method (e.g. membrane osmometry for Mn or light scattering for Mw) can be used.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 276:2021(Main)
Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test (ISO 276:2019)
EN ISO 276:2021

This document specifies the requirements and the corresponding test methods for five types of linseed
stand oil suitable for paints and varnishes.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4629-3:2020(Main)
Binders for paints and varnishes - Determination of hydroxyl value - Part 3: Rapid test (ISO 4629-3:2018)
EN ISO 4629-3:2020

This document specifies a titrimetric method for determining the hydroxyl groups in resins and binders for paints and varnishes.
This method is primarily suitable for neutral media. Acidic products provide higher values; neutral products provide, through neutralization of the acidic carbamates, lower values. For these products, preliminary tests are performed to ensure the applicability of the method.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4625-1:2020(Main)
Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method (ISO 4625-1:2020)
EN ISO 4625-1:2020

This document specifies the test methods for determining the softening point of resins (including rosin)
and similar materials by means of ring-and-ball apparatus.
Both manual and automated methods are specified, the automated method being the reference method.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3681:2019(Main)
Binders for paints and varnishes - Determination of saponification value - Titrimetric method (ISO 3681:2018)
EN ISO 3681:2018

This document specifies a titrimetric method for determining the esterified-acid content in binders for
paints and varnishes, free acids and acid anhydrides being necessarily included in the result obtained.
Because different binders vary in their resistance to saponification, this document is of limited
applicability. If necessary, completeness of saponification can be checked by repeating the test under
more severe conditions achieved by the use of longer saponification time, more concentrated potassium
hydroxide solution, or a higher-boiling alcohol as solvent.
Annex A specifies a procedure suitable for binders that saponify with difficulty.
The method is not applicable to those materials that show further reaction with alkalis beyond normal
saponification.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4629-2:2016(Main)
Binders for paints and varnishes - Determination of hydroxyl value - Part 2: Titrimetric method using a catalyst (ISO 4629-2:2016)
EN ISO 4629-2:2016

This International Standard specifies a titrimetric method for determining the hydroxyl value of resins, binders for paints and varnishes, primary alcohols, glycols and fats. Wheter it can be applied for hydrocarboxylic acids, phenolic hydroxyl groups, polyols such as trimethyl propane and substances containing aromatic groups have been activated for Friedel-Crafts acylation shall be decided on case-to-case basis.
Under the right conditions, the method is also applicable for determining the hydroxyl value of castor oil and its derivates.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4629-1:2016(Main)
Binders for paints and varnishes - Determination of hydroxyl value - Titrimetric method - Part 1: Titrimetric method without using a catalyst (ISO 4629-1:2016)
EN ISO 4629-1:2016

This part of ISO 4629 specifies a titrimetric method for determining the free hydroxyl groups in binders
and binder solutions for paints and varnishes. The hydroxyl groups may be present as polyhydric
alcohols, partial esters, polyester end groups or hydroxylated fatty acids.
This method is not applicable to resins containing both hydroxyl groups and epoxy groups, because
the latter will also be included in the result. Also the method is not applicable to cellulose nitrate or to
phenolic resins.
NOTE 1 If, in the case of binder solutions, the hydroxyl value of the binder only is to be determined, the
possibility that other constituents of the binder solution may contain hydroxyl groups has to be taken into
account.
NOTE 2 A method for the determination of the hydroxyl value of epoxy resins is specified in ISO 7142[1].

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day