Pneumatic fluid power - Connections - Ports and stud ends - Amendment 1

Transmissions pneumatiques — Raccordements — Orifices et éléments mâles — Amendement 1

Fluidna tehnika – Pnevmatika – Priključki – Odprtine in konci navojnih priključkov – Dopolnilo 1

General Information

Status
Withdrawn
Publication Date
31-Oct-2005
Withdrawal Date
05-Mar-2023
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
06-Mar-2023
Due Date
29-Mar-2023
Completion Date
06-Mar-2023

Relations

Buy Standard

Standard
ISO 16030:2001/Amd 1:2005
English language
1 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 16030:2001/Amd 1:2005
French language
1 pages
sale 15% off
Preview
sale 15% off
Preview
Amendment
ISO 16030:2002/AMD 1:2005
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 16030
First edition
2001-12-15
AMENDMENT 1
2005-04-01
Pneumatic fluid power — Connections —
Ports and stud ends
AMENDMENT 1
Transmissions pneumatiques — Raccordements — Orifices et
éléments mâles
AMENDEMENT 1




Reference number
ISO 16030:2001/Amd.1:2005(E)
©
ISO 2005

---------------------- Page: 1 ----------------------
ISO 16030:2001/Amd.1:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2005 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 16030:2001/Amd.1:2005(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
t
...

NORME ISO
INTERNATIONALE 16030
Première édition
2001-12-15
AMENDEMENT 1
2005-04-01

Transmissions pneumatiques —
Raccordements — Orifices et éléments
mâles
AMENDEMENT 1
Pneumatic fluid power — Connections — Ports and stud ends
AMENDMENT 1




Numéro de référence
ISO 16030:2001/Amd.1:2005(F)
©
ISO 2005

---------------------- Page: 1 ----------------------
ISO 16030:2001/Amd.1:2005(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.


©  ISO 2005
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse

ii © ISO 2005 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 16030:2001/Amd.1:2005(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'I
...

SLOVENSKI STANDARD
SIST ISO 16030:2002/AMD 1:2005
01-november-2005
)OXLGQDWHKQLND±3QHYPDWLND±3ULNOMXþNL±2GSUWLQHLQNRQFLQDYRMQLKSULNOMXþNRY
±'RSROQLOR
Pneumatic fluid power - Connections - Ports and stud ends - Amendment 1
Ta slovenski standard je istoveten z: ISO 16030:2001/Amd 1:2005
ICS:
23.100.40 Cevna napeljava in sklopke Piping and couplings
SIST ISO 16030:2002/AMD 1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 16030:2002/AMD 1:2005

---------------------- Page: 2 ----------------------

SIST ISO 16030:2002/AMD 1:2005


INTERNATIONAL ISO
STANDARD 16030
First edition
2001-12-15
AMENDMENT 1
2005-04-01
Pneumatic fluid power — Connections —
Ports and stud ends
AMENDMENT 1
Transmissions pneumatiques — Raccordements — Orifices et
éléments mâles
AMENDEMENT 1




Reference number
ISO 16030:2001/Amd.1:2005(E)
©
ISO 2005

---------------------- Page: 3 ----------------------

SIST ISO 16030:2002/AMD 1:2005
ISO 16030:2001/Amd.1:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switz
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.