iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 10077-2:2012/AC:2012

(Corrigendum)

Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames - Technical Corrigendum 1 (ISO 10077-2:2012/Cor 1:2012)

Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames - Technical Corrigendum 1 (ISO 10077-2:2012/Cor 1:2012)

This European Standard specifies a method and gives reference input data for the calculation of the thermal transmittance of frame profiles and of the linear thermal transmittance of their junction with glazings or opaque panels.
The method can also be used to evaluate the thermal resistance of shutter profiles and the thermal characteristics of roller shutter boxes.
This European Standard also gives criteria for the validation of numerical methods used for the calculation.
This European Standard does not include effects of solar radiation, heat transfer caused by air leakage or three-dimensional heat transfer such as pin point metallic connections. Thermal bridge effects between the frame and the building structure are not included.

Wärmetechnisches Verhalten von Fenstern, Türen und Abschlüssen - Berechnung des Wärmedurchgangskoeffizienten - Teil 2: Numerisches Verfahren für Rahmen (ISO 10077-2:2012/Cor 1:2012)

Performance thermique des fenêtres, portes et fermetures - Calcul du coefficient de transmission thermique - Partie 2: Méthode numérique pour les encadrements - Rectificatif technique 1 (ISO 10077-2:2012/Cor 1:2012)

Toplotne lastnosti oken, vrat in polken - Izračun toplotne prehodnosti - 2. del: Računska metoda za okvirje - Tehnični popravek 1 (ISO 10077-2:2012/Cor 1:2012)

Ta evropski standard določa metodo in podaja referenčne vhodne podatke za izračun toplotne prehodnosti profilov okvirjev in linearne toplotne prehodnosti njihovega spoja z zasteklitvijo ali prosojnimi ploščami. Metodo je mogoče uporabiti tudi za oceno toplotne upornosti profilov polken in toplotnih značilnosti roletnih škatel. Ta evropski standard določa tudi merila za ovrednotenje računskih metod za izračun. Ta evropski standard ne zajema učinkov sončnega sevanja, prenosa toplote zaradi puščanja zraka ali tridimenzionalnega prenosa toplote, kot so točkaste kovinske povezave. Učinki toplotnih mostov med okvirjem in strukturo stavbe niso zajeti.

General Information

Status
Withdrawn
Publication Date
18-Oct-2012
Withdrawal Date
10-Aug-2017
ICS
91.060.50 - Doors and windows
91.120.10 - Thermal insulation of buildings
Technical Committee
TOP - Thermal insulation
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
11-Aug-2017
Due Date
03-Sep-2017
Completion Date
11-Aug-2017
Directive
89/106/EEC - Construction products
Mandate
M/122 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on roof coverings, rooflights, roof windows and ancillary products
Ref Project
EN ISO 10077-2:2012/AC:2012 - Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames - Technical Corrigendum 1 (ISO 10077-2:2012/Cor 1:2012)

Relations

Corrects
SIST EN ISO 10077-2:2012 - Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames (ISO 10077-2:2012)
Effective Date
01-Nov-2012
Replaced By
SIST EN ISO 10077-2:2017 - Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames (ISO 10077-2:2017)
Effective Date
01-Sep-2017
Corrects
SIST EN ISO 10077-2:2012 - Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames (ISO 10077-2:2012)
Effective Date
08-Jun-2022

Buy Standard

EN ISO 10077-2:2012/AC:2012EN ISO 10077-2:2012/AC:2012
PreviousNext
Corrigendum
EN ISO 10077-2:2012/AC:2012
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Wärmetechnisches Verhalten von Fenstern, Türen und Abschlüssen - Berechnung des Wärmedurchgangskoeffizienten - Teil 2: Numerisches Verfahren für Rahmen (ISO 10077-2:2012/Cor 1:2012)Performance thermique des fenêtres, portes et fermetures - Calcul du coefficient de transmission thermique - Partie 2: Méthode numérique pour les encadrements - Rectificatif technique 1 (ISO 10077-2:2012/Cor 1:2012)Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames - Technical Corrigendum 1 (ISO 10077-2:2012/Cor 1:2012)91.120.10Toplotna izolacija stavbThermal insulation91.060.50Vrata in oknaDoors and windowsICS:Ta slovenski standard je istoveten z:EN ISO 10077-2:2012/AC:2012SIST EN ISO 10077-2:2012/AC:2012en,fr,de01-november-2012SIST EN ISO 10077-2:2012/AC:2012SLOVENSKI
STANDARD



SIST EN ISO 10077-2:2012/AC:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 10077-2:2012/AC
July 2012
Juillet 2012
Juli 2012 ICS 91.060.50; 91.120.10 English version Version Française Deutsche Fassung
Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames - Technical Corrigendum 1 (ISO 10077-2:2012/Cor 1:2012)
Performance thermique des fenêtres, portes et fermetures - Calcul du coefficient de transmission thermique - Partie 2: Méthode numérique pour les encadrements - Rectificatif technique 1 (ISO 10077-2:2012/Cor 1:2012)
Wärmetechnisches Verhalten von Fenstern, Türen und Abschlüssen - Berechnung des Wärmedurchgangskoeffizienten - Teil 2: Numerisches Verfahren für Rahmen (ISO 10077-2:2012/Cor 1:2012) This corrigendum becomes effective on 15 July 2012 for incorporation in the three official language versions of the EN.
Ce corrigendum prendra effet le 15 juillet 2012 pour incorporation dans les trois versions linguistiques officielles de la EN.
Die Berichtigung tritt am 15. Juli 2012 zur Einarbeitung in die drei offiziellen Sprachfassungen der ENin Kraft.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit rés
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 10077-1:2017(Main)
Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General (ISO 10077-1:2017, Corrected version 2020-02)
EN ISO 10077-1:2017

This document specifies methods for the calculation of the thermal transmittance of windows and
pedestrian doors consisting of glazed and/or opaque panels fitted in a frame, with and without shutters.
This document allows for
— different types of glazing (glass or plastic; single or multiple glazing; with or without low emissivity
coatings, and with spaces filled with air or other gases),
— opaque panels within the window or door,
— various types of frames (wood, plastic, metallic with and without thermal barrier, metallic with
pinpoint metallic connections or any combination of materials), and
— where appropriate, the additional thermal resistance introduced by different types of closed shutter
or external blind, depending on their air permeability.
The thermal transmittance of roof windows and other projecting windows can be calculated according
to this document, provided that the thermal transmittance of their frame sections is determined by
measurement or by numerical calculation.
Default values for glazing, frames and shutters are given in the annexes. Thermal bridge effects at the
rebate or joint between the window or door frame and the rest of the building envelope are excluded
from the calculation.
The calculation does not include
— effects of solar radiation (see standards under M2-8),
— heat transfer caused by air leakage (see standards under M2-6),
— calculation of condensation,
— ventilation of air spaces in double and coupled windows, and
— surrounding parts of an oriel window.
The document is not applicable to
— curtain walls and other structural glazing (see other standards under M2-5), and
— industrial, commercial and garage doors.
NOTE Table 1 in the Introduction shows the relative position of this document within the set of EPB
standards in the context of the modular structure as set out in ISO 52000-1.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10077-2:2017(Main)
Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames (ISO 10077-2:2017)
EN ISO 10077-2:2017

Revision of EN ISO 10077-2:2012
This part of ISO 10077 specifies a method and gives reference input data for the calculation of the thermal transmittance of frame profiles and of the linear thermal transmittance of their junction with glazing or opaque panels.
The method can also be used to evaluate the thermal resistance of shutter profiles and the thermal characteristics of roller shutter boxes and similar components (e.g. blinds).
This part of ISO 10077 also gives criteria for the validation of numerical methods used for the calculation.
This part of ISO 10077 does not include effects of solar radiation, heat transfer caused by air leakage or three-dimensional heat transfer such as pin point metallic connections. Thermal bridge effects between the frame and the building structure are not included.
No change to the scope is expected. There will be editorial revision (new structure) in the context of Mandat M/480 and also technical revison of the existing standard.

  • Standard
    83 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12567-1:2010/AC:2011(Corrigendum)
Thermal performance of windows and doors - Determination of thermal transmittance by the hot-box method - Part 1: Complete windows and doors - Technical Corrigendum 1 (ISO 12567-1:2010/Cor 1:2010)
EN ISO 12567-1:2010/AC:2010

This part of ISO 12567 specifies a method to measure the thermal transmittance of a door or window system. It is applicable to all effects of frames, sashes, shutters, blinds, screens, panels, door leaves and fittings. It is not applicable to - edge effects occurring outside the perimeter of the specimen, - energy transfer due to solar radiation on the specimen, - effects of air leakage through the specimen, and - roof windows and projecting products, where the external face projects beyond the cold side roof surface.

  • Corrigendum
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12567-1:2010(Main)
Thermal performance of windows and doors - Determination of thermal transmittance by the hot-box method - Part 1: Complete windows and doors (ISO 12567-1:2010)
EN ISO 12567-1:2010

This part of ISO 12567 specifies a method to measure the thermal transmittance of a door or window system. It is applicable to all effects of frames, sashes, shutters, blinds, screens, panels, door leaves and fittings. It is not applicable to - edge effects occurring outside the perimeter of the specimen, - energy transfer due to solar radiation on the specimen, - effects of air leakage through the specimen, and - roof windows and projecting products, where the external face projects beyond the cold side roof surface.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12567-2:2006(Main)
Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 2: Roof windows and other projecting windows (ISO 12567-2:2005)
EN ISO 12567-2:2005

This part of ISO 12567 specifies a method to measure the thermal transmittance of roof windows and projecting windows. It does not include: - edge effects occurring outside the perimeter of the specimen; - energy transfer due to solar radiation on the specimen; - effects of air leakage through the specimen.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12412-4:2003(Main)
Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Part 4: Roller shutter boxes
EN 12412-4:2003

This European Standard specifies a method, based on EN ISO 8990 and EN ISO 12567-1, to measure the overall thermal transmittance of a roller shutter box in a hot box. This includes all effects of geometrical and material characteristics in a test specimen.
Edge effects occurring outside of the perimeter of the specimen are excluded. Furthermore, energy transfer due to solar radiation is not taken into account, and air leakage is excluded.
The method is designed to provide both standardised tests which enable a fair comparison of different products to be made, and specific tests on products for practical application purposes. The former includes window standardised specimen sizes and applied test criteria.
The determination of the overall thermal transmittance is performed for conditions which will correspond to a similar situation of the roller shutter box in practice.
Information on the design of the calibration transfer standard is given in EN ISO 12567-1.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12412-2:2003(Main)
Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Part 2: Frames
EN 12412-2:2003

This European Standard specifies a method, based on EN ISO 8990 and EN ISO 12567-1, to measure the thermal transmittance of frame and sash components of windows and doors, including mullions and transoms.
The thermal bridging effect of window or door components (handles, hinges, closing devices, etc.) is included.
The test procedure is designed to take into account the whole developed area of the frame or sash surface, but excludes the influence of the thermal bridge introduced through the spacer in sealed glazing units.
Edge effects occurring outside of the perimeter of the specimen are excluded. Furthermore, energy transfer due to solar radiation is not taken into account, and air leakage is excluded.
The measurements are performed under defined conditions to facilitate the comparison of measured values.
Information on the design of the calibration transfer standard is given in EN ISO 12567-1.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10077-2:2017/oprA1:2023(Amendment)
Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames - Amendment 1 (ISO 10077 2:2017/DAM 1:2023)
EN ISO 10077-2:2017/prA1
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10077-1:2017(Main)
Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General (ISO 10077-1:2017, Corrected version 2020-02)
EN ISO 10077-1:2017

This document specifies methods for the calculation of the thermal transmittance of windows and
pedestrian doors consisting of glazed and/or opaque panels fitted in a frame, with and without shutters.
This document allows for
— different types of glazing (glass or plastic; single or multiple glazing; with or without low emissivity
coatings, and with spaces filled with air or other gases),
— opaque panels within the window or door,
— various types of frames (wood, plastic, metallic with and without thermal barrier, metallic with
pinpoint metallic connections or any combination of materials), and
— where appropriate, the additional thermal resistance introduced by different types of closed shutter
or external blind, depending on their air permeability.
The thermal transmittance of roof windows and other projecting windows can be calculated according
to this document, provided that the thermal transmittance of their frame sections is determined by
measurement or by numerical calculation.
Default values for glazing, frames and shutters are given in the annexes. Thermal bridge effects at the
rebate or joint between the window or door frame and the rest of the building envelope are excluded
from the calculation.
The calculation does not include
— effects of solar radiation (see standards under M2-8),
— heat transfer caused by air leakage (see standards under M2-6),
— calculation of condensation,
— ventilation of air spaces in double and coupled windows, and
— surrounding parts of an oriel window.
The document is not applicable to
— curtain walls and other structural glazing (see other standards under M2-5), and
— industrial, commercial and garage doors.
NOTE Table 1 in the Introduction shows the relative position of this document within the set of EPB
standards in the context of the modular structure as set out in ISO 52000-1.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10077-2:2017(Main)
Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames (ISO 10077-2:2017)
EN ISO 10077-2:2017

Revision of EN ISO 10077-2:2012
This part of ISO 10077 specifies a method and gives reference input data for the calculation of the thermal transmittance of frame profiles and of the linear thermal transmittance of their junction with glazing or opaque panels.
The method can also be used to evaluate the thermal resistance of shutter profiles and the thermal characteristics of roller shutter boxes and similar components (e.g. blinds).
This part of ISO 10077 also gives criteria for the validation of numerical methods used for the calculation.
This part of ISO 10077 does not include effects of solar radiation, heat transfer caused by air leakage or three-dimensional heat transfer such as pin point metallic connections. Thermal bridge effects between the frame and the building structure are not included.
No change to the scope is expected. There will be editorial revision (new structure) in the context of Mandat M/480 and also technical revison of the existing standard.

  • Standard
    83 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day