SIST EN ISO 23328-2:2009
(Main)Breathing system filters for anaesthetic and respiratory use - Part 2: Non-filtration aspects (ISO 23328-2:2002)
Breathing system filters for anaesthetic and respiratory use - Part 2: Non-filtration aspects (ISO 23328-2:2002)
This part of ISO 23328 specifies requirements for non-filtration aspects of breathing system filters (BSF) intended
for anaesthetic and respiratory use, and addresses connection ports, leakage, resistance to flow, packaging,
marking and information supplied. The test method is intended for BSF used with a clinical breathing system.
It is not applicable to other types of filter, e.g. those designed to protect vacuum sources or gas sample lines, to
filter compressed gases, or to protect test equipment for physiological respiratory measurements.
NOTE A method for assessing filtration performance of BSF is given in ISO 23328-1.
Filter für Atemsysteme zur Anwendung bei Anästhesie und Beatmung - Teil 2: Aspekte, die nicht die Filtration betreffen (ISO 23328-2:2002)
Filtres pour matériel d'anesthésie et de réanimation respiratoire - Partie 2: Aspects autres que la filtration (ISO 23328-2:2002)
L'ISO 23328-2:2002 spécifie les exigences s'appliquant aux aspects autres que la filtration des filtres pour systèmes respiratoires (BSF) pour matériel d'anesthésie et de réanimation. Elle traite des orifices de raccordement, des fuites, de la résistance au débit, de l'emballage, du marquage et des informations fournies. La méthode d'essai est destinée aux BSF utilisés avec un système respiratoire clinique.
L'ISO 23328-2:2002 ne s'applique pas aux autres types de filtres, par exemple ceux conçus pour protéger les sources de vide ou les lignes de prélèvement de gaz, pour filtrer les gaz comprimés ou pour protéger le matériel d'essai utilisé pour les mesurages respiratoires physiologiques.
Sistem dihalnih filtrov za anestezijsko in dihalno uporabo - 2. del: Nefiltracijski vidiki (ISO 23328-2:2002)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 23328-2:2009
01-julij-2009
1DGRPHãþD
SIST EN ISO 23328-2:2008
Sistem dihalnih filtrov za anestezijsko in dihalno uporabo - 2. del: Nefiltracijski
vidiki (ISO 23328-2:2002)
Breathing system filters for anaesthetic and respiratory use - Part 2: Non-filtration
aspects (ISO 23328-2:2002)
Filter für Atemsysteme zur Anwendung bei Anästhesie und Beatmung - Teil 2: Aspekte,
die nicht die Filtration betreffen (ISO 23328-2:2002)
Filtres pour matériel d'anesthésie et de réanimation respiratoire - Partie 2: Aspects
autres que la filtration (ISO 23328-2:2002)
Ta slovenski standard je istoveten z: EN ISO 23328-2:2009
ICS:
11.040.10 Anestezijska, respiratorna in Anaesthetic, respiratory and
reanimacijska oprema reanimation equipment
SIST EN ISO 23328-2:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 23328-2:2009
---------------------- Page: 2 ----------------------
SIST EN ISO 23328-2:2009
EUROPEAN STANDARD
EN ISO 23328-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2009
ICS 11.040.10 Supersedes EN ISO 23328-2:2008
English Version
Breathing system filters for anaesthetic and respiratory use -
Part 2: Non-filtration aspects (ISO 23328-2:2002)
Filtres pour matériel d'anesthésie et de réanimation Filter für Atemsysteme zur Anwendung bei Anästhesie und
respiratoire - Partie 2: Aspects autres que la filtration (ISO Beatmung - Teil 2: Aspekte, die nicht die Filtration betreffen
23328-2:2002) (ISO 23328-2:2002)
This European Standard was approved by CEN on 24 February 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 23328-2:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 23328-2:2009
EN ISO 23328-2:2009 (E)
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 93/42/EEC .4
2
---------------------- Page: 4 ----------------------
SIST EN ISO 23328-2:2009
EN ISO 23328-2:2009 (E)
Foreword
The text of ISO 23328-2:2002 has been prepared by Technical Committee ISO/TC 121 “Anaesthetic and
respiratory equipment” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 23328-2:2009 by Technical Committee CEN/TC 215 “Respiratory and anaesthetic equipment” the
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2009, and conflicting national standards shall be
withdrawn at the latest by March 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 23328-2:2008.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive.
For relationship with EC Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Fra
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.