iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 16583:2022/oprA1:2024

(Amendment)

Heat exchangers - Hydronic room fan coils units - Determination of the sound power level

Heat exchangers - Hydronic room fan coils units - Determination of the sound power level

This document is applicable to hydronic fan coil units (FCU) as factory-made single assemblies which provide the functions of cooling and/or heating but do not include the source of cooling or heating.
This document is applicable to both air free delivery and air ducted units with a maximum external static pressure due to duct resistance of 300 Pa max.
This document specifies methods for the determination of the acoustical performance of fan coil units, defining standard working condition and installation.
It is not the purpose of this document to specify the tests used for production or field testing.
NOTE   For the purpose of remaining clauses, the term "unit" is used to mean "fan coil unit".

Wärmeübertrager - Wasser-Luft-Ventilatorkonvektoren - Bestimmung des Schallleistungspegels

Échangeurs thermiques - Ventilo-convecteurs à eau - Détermination du niveau de puissance acoustique

Prenosniki toplote - Ventilatorski konvektorji voda/zrak - Ugotavljanje ravni zvočne moči

General Information

Status
Not Published
Public Enquiry End Date
26-Jun-2024
ICS
27.060.30 - Boilers and heat exchangers
Technical Committee
OGS - Heating for buildings
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
09-Apr-2024
Due Date
27-Aug-2024
Directive
2016/2281 - Commission Regulation (EU) 2016/2281 of 30 November 2016 implementing Directive 2009/125/EC of the European Parliament and of the Council establishing a framework for the setting of ecodesign requirements for energy-related products, with regard to ecodesign requirements for air heating products, cooling products, high temperature process chillers and fan coil units
Mandate
M/560 - [C(2019) 1725 final] Ecodesign requirements for air heating products, cooling products, high temperature process chillers and fan coils in support of Commission Regulation (EU) 2016/2281
Ref Project
EN 16583:2022/prA1 - Heat exchangers - Hydronic room fan coils units - Determination of the sound power level

Relations

Amends
SIST EN 16583:2022 - Heat exchangers - Hydronic room fan coils units - Determination of the sound power level
Effective Date
19-Apr-2023

Buy Standard

EN 16583:2022/oprA1:2024EN 16583:2022/oprA1:2024
PreviousNext
Draft
EN 16583:2022/oprA1:2024
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 16583:2022/oprA1:2024
01-junij-2024
Prenosniki toplote - Ventilatorski konvektorji voda/zrak - Ugotavljanje ravni zvočne
moči
Heat exchangers - Hydronic room fan coils units - Determination of the sound power
level
Wärmeübertrager - Wasser-Luft-Ventilatorkonvektoren - Bestimmung des
Schallleistungspegels
Échangeurs thermiques - Ventilo-convecteurs à eau - Détermination du niveau de
puissance acoustique
Ta slovenski standard je istoveten z: EN 16583:2022/prA1
ICS:
27.060.30 Grelniki vode in prenosniki Boilers and heat exchangers
toplote
SIST EN 16583:2022/oprA1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 16583:2022/oprA1:2024

---------------------- Page: 2 ----------------------
SIST EN 16583:2022/oprA1:2024


DRAFT
EUROPEAN STANDARD
EN 16583:2022
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
April 2024
ICS 27.060.30
English Version

Heat exchangers - Hydronic room fan coils units -
Determination of the sound power level
Échangeurs thermiques - Ventilo-convecteurs à eau - Wärmeübertrager - Wasser-Luft-
Détermination du niveau de puissance acoustique Ventilatorkonvektoren - Bestimmung des
Schallleistungspegels
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 113.

This draft amendment A1, if approved, will modify the European Standard EN 16583:2022. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 16583:2022(Main)
Heat exchangers - Hydronic room fan coils units - Determination of the sound power level
EN 16583:2022

This European Standard applies to hydronic fan coil units (FCU) as factory-made single assemblies which provide the functions of cooling and/or heating but do not include the source of cooling or heating.
The standard covers both air free delivery and air ducted units with a maximum external static pressure due to duct resistance of 120 Pa max.
This European Standard provides methods for the determination of the acoustical performance of fan coil units, defining standard working condition and installation.
It is not the purpose of this standard to specify the tests used for production or field testing.
NOTE   For the purpose of remaining clauses, the term “unit” is used to mean “fan coil unit” as defined in 3.1 of FprEN 1397:2015.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 308:2022(Main)
Heat exchangers - Test procedures for establishing performance of air to air heat recovery components
EN 308:2022

This European Standard specifies methods to be used for testing of air-to-air heat recovery components (HRC). The main purpose of the HRC shall be to
- preheat or heat and/or
- precool or cool
supply air in ventilation systems or air conditioning systems. Optional HRC can exchange air humidity between exhaust and supply air. The HRC contain the heat exchangers and all necessary features and auxiliary devices for the exchange of sensible heat and (if available) air humidity between exhaust air and supply air. The HRC will be installed in casings or air ducts. If fans are part of the test unit, the effect of the fan power on the measured values shall be corrected.
This European Standard specifies procedures and input criteria required for tests to determine the performance of a HRC at one or several test conditions, each of them with continuous air flows, air temperatures and humidities at both inlet sides. Three different test types are covered:
- Laboratory testing of HRC
- Laboratory testing of HRC installed in non-residential air handling
units (definition according Commission Regulation(EU) No 1253/2014) in design configuration
- On-site (field) testing of HRC in non-residential air handling units
or systems in operation configuration.
This European Standard is applicable to recuperators and regenerators intended for exchange of sensible heat and optionally for exchange of air humidity.
This European Standard prescribes test methods for determining:
1. the temperature and humidity efficiency
2. the pressure drop of exhaust air and supply air sides
3. possible internal leakages; exhaust air transfer ratio (EATR) and
outdoor air correction factor (OACF)and
4. auxiliary energy used for the operation of the HRC.
HRC using heat pumps are not covered by this standard.

  • Standard
    86 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1397:2021(Main)
Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance
EN 1397:2021

This European Standard applies to hydronic fan coil units (FCU) as factory-made single assemblies which provide the functions of cooling and/or heating but do not include the source of cooling or heating.
The standard covers both air free delivery and air ducted units with a maximum external static pressure due to duct resistance of 120 Pa max.
The standard applies to all types of fan speed control of a fan coil unit (variable speed, multispeed).
This standard deals with the cooling and heating functions of the FCU considered as an emitter for cooling/heating of a room/space. It does not cover any ventilation function of the unit.
If the FCU can also provide fresh air, this function is not considered and the fresh air inlet closed during testing.
This European Standard provides a method for the determination of the thermal performance of fan coil units in standard conditions, for the use with hot or chilled water or water mixtures. The test procedures given in this standard may additionally be used for determining performance at other conditions.
It also provides the method for the determination of the air flow rate supplied by the fan coil unit.
The standard does not cover the rating of heating or cooling from direct expansion coils or heating from electric resistance elements.
The standard does not cover acoustic performance of fan coil units which is dealt with in EN 16583.
It is not the purpose of this standard to specify the tests used for production or field testing.
NOTE   For the purpose of remaining clauses, the term “unit” is used to mean “fan coil unit” as defined in 3.1.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13487:2019(Main)
Heat exchangers - Forced convection air cooled refrigerant condensers and dry coolers - Sound measurement
EN 13487:2019

This European Standard is one of a series of European Standards dedicated to air-cooled heat exchangers.
   forced convection air cooled refrigerant condensers as specified in EN 327;
   forced convection unit air coolers for refrigeration as specified in EN 328;
   air cooled liquid coolers "dry coolers" as specified in EN 1048.
This standard provides information for assessing and presenting the acoustic emission characteristics of heat exchangers under stationary operating conditions.
This European Standard is applicable to selfstanding forced convection air cooled refrigerant condensers and air cooled liquid coolers "dry coolers" and air coolers.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1048:2014(Main)
Heat exchangers - Air cooled liquid coolers ('dry coolers') - Test procedures for establishing performance
EN 1048:2014

EN 1048 applies to remote forced convection air cooled liquid coolers, within which no change in the liquid phase occurs. This European Standard does not apply to liquid coolers, designed primarily for installation within the machinery compartment of packaged products. Its purpose is to establish uniform methods to test and ascertain the following: - Product identification; - Capacity; - Air flow rate; - Liquid side pressure drop; - Energy requirements. This European Standard does not cover technical safety aspects.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 327:2014(Main)
Heat exchangers - Forced convection air cooled refrigerant condensers - Test procedures for establishing performance
EN 327:2014

This European Standard applies to non-ducted forced convection air cooled refrigerant condensers/gas coolers with dry air side surface within which the refrigerant changes phases or is cooled. Its purpose is to establish uniform methods of performance assessment. It does not deal with evaluation of conformity. This European Standard does not apply to air cooled condensers/gas coolers, designed primarily for installation within the machinery compartment of packaged products or in factory-assembled condensing/gas cooling units. This European Standard does not apply to condensers with an integral subcooling part. This European Standard specifies methods to test and ascertain the following:
— product identification;
— standard capacity;
— nominal air flow rate;
— nominal fan power.
This European Standard does not cover technical safety aspects.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 328:2014(Main)
Heat exchangers - Forced convection unit air coolers for refrigeration - Test procedures for establishing the performance
EN 328:2014

This European Standard is applicable to non-ducted unit air coolers for refrigeration operating:
a) with direct dry expansion of a refrigerant;
b) with liquid overfeed by pump circulation of a refrigerant;
c) with a liquid.
This standard specifies uniform methods of performance assessment to test and ascertain the following:
— product identification;
— standard capacity;
— standard liquid pressure drop;
— standard refrigerant pressure drop (for operation with liquid overfeed by pump circulation only);
— nominal air flow rate;
— nominal fan power.
It does not cover evaluation of conformity. It is not applicable to air coolers for duct mounting or with natural air convection. This standard does not cover technical safety aspects.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1148:1999/A1:2005(Main)
Heat exchangers - Water to water heat exchangers for district heating - Test procedures for establishing the performance data - Amendment A1
EN 1148:1998/A1:2005

UAP of 4 months (TC Res 147/1998) (CC/001115)

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14705:2005(Main)
Heat exchangers - Method of measurement and evaluation of thermal performances of wet cooling towers
EN 14705:2005

This European Standard specifies requirements, test methods and acceptance tests for thermal performances pumping head verification of wet cooling towers and plume abatement for wet/dry cooling towers.
This European Standard is applicable to natural draught wet cooling towers (see in 3.1.2.2) fan assisted natural draught cooling tower (see 3.1.2.3), wet/dry cooling towers (see 3.1.2.4) and "Mechanical draught cooling towers", except series ones.
It specifies the test methods, the apparatus required, the limitation of errors and the method for results examination.
The acceptance testing covers the verification of the thermal performance data and pumping head of the cooling tower as specified in the contract between the supplier and the purchaser. If these tests are required then this should be recognized at the time of the contract, as additional fittings, and preparations for the test may be required.
Deviations from the rules laid down below as well as additions need special agreement between purchaser and supplier and should be documented.
This standard does not apply to mechanical draught series wet cooling towers which are dealt with in prEN 13741.
NOTE   Terms like "design", "values", "guarantee" and "acceptance" used in this standard should be understood in a technical but not in a legal or commercial sense.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1216:1999/A1:2004(Amendment)
Heat exchangers - Forced circulation air-cooling and air-heating coils - Test procedures for establishing the performance
EN 1216:1998/A1:2002

UAP of 4 months (TC Res 146e/1998) (CC/001115)

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day