SIST EN 60244-12-2:1999

Methods of measurement for radio transmitters -- Part 12: Guideline for drawing up descriptive leaflets for transmitters and transposers for sound and television broadcasting -- Specification sheets

Contains the specification sheets described in EN 60244-12-1.

Meßverfahren für Funksender -- Teil 12: Anleitung zur Erstellung von Datenblättern für Funksender und Umsetzer für Fernseh- und Tonrundfunk -- Spezifikationen

Méthodes de mesure applicables aux émetteurs radiorélectriques -- Partie 12: Guide de rédaction des feuilles de spécification des émetteurs et des réémetteurs de télévision et de radiodiffusion sonore -- Feuilles de spécification

Contient les feuilles de spécification décrites dans la EN 60244-12-1.

Methods of measurement for radio transmitters - Part 2: Guideline for drawing up descriptive leaflets for transmitters and and transposers for sound and television broadcasting - Specification sheets (IEC 60244-12-2:1989)

General Information

• Status: Published
• Publication Date: 31-Dec-1998
• ICS: 33.060.20 - Receiving and transmitting equipment
• Technical Committee: RZV - Radiocommunication
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jan-1999
• Due Date: 01-Jan-1999
• Completion Date: 01-Jan-1999
• Ref Project: EN 60244-12-2:1993 - Methods of measurement for radio transmitters - Part 12: Guideline for drawing up descriptive leaflets for transmitters and transposers for sound and television broadcasting - Specification sheets

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60244-12-2:1999
01-januar-1999
Methods of measurement for radio transmitters - Part 2: Guideline for drawing up
descriptive leaflets for transmitters and and transposers for sound and television
broadcasting - Specification sheets (IEC 60244-12-2:1989)
Methods of measurement for radio transmitters -- Part 12: Guideline for drawing up
descriptive leaflets for transmitters and transposers for sound and television
broadcasting -- Specification sheets
Meßverfahren für Funksender -- Teil 12: Anleitung zur Erstellung von Datenblättern für
Funksender und Umsetzer für Fernseh- und Tonrundfunk -- Spezifikationen
Méthodes de mesure applicables aux émetteurs radiorélectriques -- Partie 12: Guide de
rédaction des feuilles de spécification des émetteurs et des réémetteurs de télévision et
de radiodiffusion sonore -- Feuilles de spécification
Ta slovenski standard je istoveten z: EN 60244-12-2:1993
ICS:
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
SIST EN 60244-12-2:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60244-12-2:1999

---------------------- Page: 2 ----------------------

SIST EN 60244-12-2:1999

---------------------- Page: 3 ----------------------

SIST EN 60244-12-2:1999

---------------------- Page: 4 ----------------------

SIST EN 60244-12-2:1999

---------------------- Page: 5 ----------------------

SIST EN 60244-12-2:1999

---------------------- Page: 6 ----------------------

SIST EN 60244-12-2:1999
NORME CEI
INTERNATIONALE IEC
INTERNATIONAL 60244-12-2
Première édition
STAN DARD
First edition
1989-07
Méthodes de mesure applicables aux
émetteurs radioélectriques
Douzième partie:
Guide de rédaction des feuilles de spécification
des émetteurs et des réémetteurs de télévision
et de radiodiffusion sonore
Feuilles de spécification
Methods of measurement for radio transmitters
Part 12:
Guideline for drawing up descriptive leaflets
for transmitters and transposers for sound
and television broadcasting —
Specification sheets
© IEC 1989 Droits de reproduction réservés — Copyright - all rights reserved
No part of this publication may be reproduced or utilized in
Aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris la photo- including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
PRICE CODE
International Electrotechnical Commission
IEC MeminyHapojaHaR 3neKTpoTexHH4ecIaR
HOMHCCHR
Pour prix, voir catalogue en vigueur
• •
For price, see current catalogue

---------------------- Page: 7 ----------------------

SIST EN 60244-12-2:1999
244-12-2 ©I EC — 3 —
CONTENTS
Page
FOREWORD 5
PREFACE 5
INTRODUCTION 9
TABLE I — General characteristics for transmitters and transposers for sound and television
11
broadcasting
TABLE II — Performance characteristics for television transmitters 17
TABLE III — Performance characteristics for television transposers 19
21
TABLE IV — Performance characteristics for FM sound transmitters
23
TABLE V — Performance characteristics for AM sound transmitters
VI — Performance characteristics for transposers for FM sound broadcasting 25
TABLE

---------------------- Page: 8 ----------------------

SIST EN 60244-12-2:1999
244-12-2 ©IEC — 5 —
INTERNATIONAL ELECTROTECHNICAL COMMISSION
METHODS OF MEASUREMENT FOR RADIO TRANSMITTERS
Part 12: Guideline for drawing up descriptive leaflets for
transmitters and transposers for sound and television broadcasting
Specification sheets
FOREWORD
I) The formal decisions or agreements of the I EC on technical matters, prepared by Technical Committees on which all the National
Committees having a special interest therein are represented, express, as nearly as possible, an international consensus of opinion
on the subjects dealt with.
They have the form of recommendations for international use and they are accepted by the National Committees in that
2)
sense.
In order to promote international unification, the I EC expresses the wish that all National Committees should adopt the text of
3)
the I EC recommendation for their national rules in so far as national conditions will permit. Any divergence between the I EC
recommendation and the corresponding national rules should, as far as possible, be clearly indicated in the latter.
4) The IEC has not laid down any procedure concerning marking as an indication of approval and has no responsibility when an
item of equipment is declared to comply with one of its recommendations.
PREFACE
This standard has been prepared by Sub-Committee 12C: Transmitting Equipment, of I EC Technical
Committee No. 12: Radiocommunications.
The text of this standard is based on the following documents:
Six Months' Rule Report on Voting Two Months' Procedure Report on Voting
I2C(CO)202
12C(CO)185 12C(CO)194 12C(CO)196
12C(CO)204 l2C(CO)208
l2C(CO)188 ' 12C(CO)198
12C(CO)189 12C(CO) l99
12C(CO)190 12C(CO)200
12C(CO)201
12C(CO)191
12C(CO)205 12C(CO)210
s
Full information on the voting for the approval of this standard can be found in the Voting Repo rt
indicated in the above table.
The folloring I EC publications are quoted in this standard:
Publications Nos. 244: Methods of measurement for radio transmitters.
244-1 (1968):
Part 1: General conditions of measurement, frequency, output power and power con-
sumption.
244-2 (1969): Part 2: Bandwidth, out-of-band power and power of non-essential oscillations.
244-2B (1969): Second supplement: Modulating signals for the measurement of bandwidth and out-
of-band power of transmitters for telephony and sound broadcasting.
244-3 (1972): Part 3: Wanted and unwanted modulation.
244-3B (1972): Second supplement: -Unwanted modulation, including hum and noise modulation.

---------------------- Page: 9 ----------------------

SIST EN 60244-12-2:1999
244-12-2 © IEC
- 7 -
244-4 (1973): Part 4: Amplitude/frequency characteristics and non-linearity distortion in transmitters
for radiotelephony and sound broadcasting.
244-4A (1976): First supplement: Section Three.
244-5 (1971): Measurements particular to transmitters and transposers for monochrome and colour
television.
244-SB (1975): Second supplement: Sections Five and Six.
244-5C (1977):
Third Supplement: Section Seven — Unwanted modulation, including hum, noise and
intermodulation.
244-9 (1982): Part 9: Transposers for monochrome and colour television.
244-10 (1986):
Part 10: Methods of measurement for television transmitters and transposers employing
insertion test signals.
244-11 (1989): rt
Pa 11: Transposers for FM sound broadcasting.
244-12-1 (1989):
Part 12: Guideline for drawing up descriptive leaflets for transmitters and transposers for
sound and television broadcasting — Characteristics to be specified.

---------------------- Page: 10 ----------------------

SIST EN 60244-12-2:1999
244-12-2 © I EC
INTERNATIONAL ELECTROTECHNICAL COMMISSION
METHODS OF MEASUREMENT FOR RADIO TRANSMITTERS
Part 12: Guideline for drawing up descriptive leaflets for
transmitters and transposers for sound and television broadcasting
Specification sheets
INTRODUCTION
This standard is one of a series of pa rts of I EC Publication 244.
This standard shall be used in conjunction with Publication 244-12-1. Its updated issue will be pub-
lished while the parts of IEC Publication 244 dealing with methods of measurement of characteristics
listed in these tables are being revised.
It is advisable to check if this is the latest issue.

---------------------- Page: 11 ----------------------

SIST EN 60244-12-2:1999
244-12-2 © I E C
— 11 —
TABLE I
General characteristics for transmitters and transposers for sound and television broadcasting
Sub-clause
Method of measurement
of IEC
Characteristic Values Statements and remarks
Publication
I EC Clause or
244-12-1
Publication sub-clause
5.1 Transmission system(s)
Class of emission and —
system(s) in accordance
with CCIR Recommenda-
tions
5.2 Frequency range(s) . to . kHz or — Replacement compo- Any suitable
MHz nents Method. See also:
— External drive
— For transposers, fre- 244-5 11
quency range for recep-
tion .:
— Switching time .
5.3 Carrier frequency stability
... Hz 244-1 Sect on Two
244-5
10
244-9 11
5.4 Intermediate frequency —
... MHz
5.5 Rated output power . W or kW For SSB transmissions 244-1 Sect on Three
Carrier reduction . dB 244-5 8
244-9 9
5.6
Nominal load impedance . S2 —
5.7 Load impedance mismatch . a) For operation within the —
performance specifica-
tions
b) For operation without —
intervention of protec-
tive devices
5.8
Nominal input impedance . f2 Audio input, balanced or —
unbalanced
... S2 Video input
52
... RF input (for transposers) — —
5.9
Input impedance mismatch . dB Audio input
... dB Video input 244-5 7.2
... dB RF input (for transposers) 244-9 8
5.10 Nominal input voltage and . mV or dB (mV) + . dB
dB }Audio input*
at . Hz —
5.11 Input voltage range Vpp J+ . dB 244-5 7.3
}video input*
1 dB
... mV or dB (mV) 244-9 6.4
+ . dB 1r f. input*
at.
MHz — . dB
5.12 Spurious emissions . dB or 244-2 11
... pW or mW 244-5 12
5.13 Out-of-band emission See relevant section of I EC
Publication 244-12-1
5.14 Cabinet radiation
a) Harmful radiation
... Under consideration
b) Interfering radiation . Under consideration
* Note Sub-clause 5.10

---------------------- Page: 12 ----------------------

SIST EN 60244-12-2:1999
244-12-2 © IEC — 13 —
(continued)
TABLE I
General characteristics for transmitters and transposers for sound and television broadcasting
Method of measurement
Sub-clause
of I EC
Statements and remarks
Characteristic Values
I EC Clause or
Publication
sub-clause
Publication
244-12-1
Environmental conditions
5.15
Within performance speci- —
a) Ambient temperature + . °C to — . °C
ficatio
...