SIST EN 300 440-2 V3.1.1:2025

Short Range Devices (SRD) operating in 1 GHz to 40 GHz - Harmonised Standard for access to radio spectrum - Part 2: Radiodetermination equipment for location tracking applications operating in the frequency range 2,4 GHz to 2,4835 GHz

The present document specifies technical requirements, limits, and test methods for radiodetermination equipment for location tracking applications operating in the frequency range 2,4 GHz to 2,4835 GHz.
Further details of the covered equipment can be found in clause 4.2 of the present document.
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive 2014/53/EU [i.3] is given in annex A.

Naprave kratkega dosega (SRD), ki delujejo v frekvenčnem območju od 1 GHz do 40 GHz - Harmonizirani standard za dostop do radijskega spektra - 2. del: Radiodoločilna oprema za aplikacije za sledenje lokaciji, ki deluje v frekvenčnem območju od 2,4 GHz do 2,4835 GHz

General Information

• Status: Published
• Public Enquiry End Date: 16-Sep-2025
• Publication Date: 21-Oct-2025
• ICS: 33.060.20 - Receiving and transmitting equipment
• Technical Committee: MOC - Mobile Communications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 20-Oct-2025
• Due Date: 25-Dec-2025
• Completion Date: 22-Oct-2025
• Ref Project: ETSI EN 300 440-2 V3.1.1 (2025-10) - Short Range Devices (SRD) operating in 1 GHz to 40 GHz; Harmonised Standard for access to radio spectrum; Part 2: Radiodetermination equipment for location tracking applications operating in the frequency range 2,4 GHz to 2,4835 GHz;

Standards Content (Sample)

Draft ETSI EN 300 440-2 V3.1.0 (2025-06)

HARMONISED EUROPEAN STANDARD
Short Range Devices (SRD) operating in 1 GHz to 40 GHz;
Harmonised Standard for access to radio spectrum;
Part 2: Radiodetermination equipment for location tracking
applications operating in the frequency range
2,4 GHz to 2,4835 GHz
2 Draft ETSI EN 300 440-2 V3.1.0 (2025-06)

Reference
REN/ERM-TG28-563
Keywords
radio, SRD, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver repository.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2025.
All rights reserved.
ETSI
3 Draft ETSI EN 300 440-2 V3.1.0 (2025-06)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definition of terms, symbols and abbreviations . 8
3.1 Terms . 8
3.2 Symbols . 8
3.3 Abbreviations . 9
4 Technical requirements specifications . 9
4.1 Environmental profile . 9
4.2 Equipment categories . 9
4.3 Transmitter requirements . 10
4.3.1 General . 10
4.3.2 Operating Frequency Range (OFR) . 10
4.3.2.1 Applicability. 10
4.3.2.2 Description Operating Frequency Range . 10
4.3.2.3 Limits for Operating Frequency Range . 10
4.3.2.4 Conformance . 10
4.3.3 RF output power . 10
4.3.3.1 Applicability. 10
4.3.3.2 Description RF output power . 10
4.3.3.3 Limits for RF output power . 10
4.3.3.4 Conformance . 10
4.3.4 TX unwanted emissions (TXUE) . 11
4.3.4.1 Applicability. 11
4.3.4.2 Description TX unwanted emissions . 11
4.3.4.3 Limits for TX unwanted emissions . 11
4.3.4.4 Conformance . 11
4.3.5 TX behaviour . 12
4.3.5.1 Applicability. 12
4.3.5.2 Description . 12
4.3.5.3 Limits . 12
4.3.5.4 Conformance . 12
4.4 Receiver requirements . 12
4.4.1 General . 12
4.4.2 Wanted Technical Performance Criteria . 12
4.4.3 Receiver spurious emissions . 13
4.4.3.1 Applicability. 13
4.4.3.2 Description . 13
4.4.3.3 Limits . 13
4.4.3.4 Conformance . 14
4.4.4 Receiver Baseline Sensitivity (RBS) . 14
4.4.4.1 Applicability. 14
4.4.4.2 Description for the RBS requirements . 14
4.4.4.3 Limits . 14
4.4.4.4 Conformance . 14
4.4.5 Receiver Baseline Resilience (RBR) . 14
4.4.5.1 Applicability. 14
4.4.5.2 Description for the RBR requirement . 14
4.4.5.3 Limits . 14
ETSI
4 Draft ETSI EN 300 440-2 V3.1.0 (2025-06)
4.4.5.4 Conformance . 15
5 Testing for compliance with technical requirements . 15
5.1 Environmental conditions for testing . 15
5.1.1 General . 15
5.1.2 Normal test conditions . 15
5.1.3 Complete environmental profile test conditions . 15
5.2 Conformance test suites and general conditions for testing . 16
5.3 Conformance methods of measurement for TX requirements . 16
5.3.1 Operating Frequency Range (OFR) . 16
5.3.2 RF output power . 16
5.3.3 TX unwanted emissions . 17
5.3.3.1 General . 17
5.3.3.2 TXUE OOB Domain . 17
5.3.3.3 TXUE Spurious domain . 17
5.3.4 TX behaviour . 17
5.4 Conformance methods of measurement for receiver . 18
5.4.1 Receiver spurious emissions . 18
5.4.2 General for RBS and RBR conformance tests . 18
5.4.3 RBS .
...

HARMONISED EUROPEAN STANDARD
Short Range Devices (SRD) operating in 1 GHz to 40 GHz;
Harmonised Standard for access to radio spectrum;
Part 2: Radiodetermination equipment for location tracking
applications operating in the frequency range
2,4 GHz to 2,4835 GHz
2 ETSI EN 300 440-2 V3.1.1 (2025-10)

Reference
REN/ERM-TG28-563
Keywords
radio, SRD, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver repository.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2025.
All rights reserved.
ETSI
3 ETSI EN 300 440-2 V3.1.1 (2025-10)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definition of terms, symbols and abbreviations . 8
3.1 Terms . 8
3.2 Symbols . 8
3.3 Abbreviations . 9
4 Technical requirements specifications . 9
4.1 Environmental profile . 9
4.2 Equipment categories . 9
4.3 Transmitter requirements . 10
4.3.1 General . 10
4.3.2 Operating Frequency Range (OFR) . 10
4.3.2.1 Applicability. 10
4.3.2.2 Description Operating Frequency Range . 10
4.3.2.3 Limits for Operating Frequency Range . 10
4.3.2.4 Conformance . 10
4.3.3 RF output power . 10
4.3.3.1 Applicability. 10
4.3.3.2 Description RF output power . 10
4.3.3.3 Limits for RF output power . 10
4.3.3.4 Conformance . 11
4.3.4 TX unwanted emissions (TXUE) . 11
4.3.4.1 Applicability. 11
4.3.4.2 Description TX unwanted emissions . 11
4.3.4.3 Limits for TX unwanted emissions . 11
4.3.4.4 Conformance . 11
4.3.5 TX behaviour . 12
4.3.5.1 Applicability. 12
4.3.5.2 Description . 12
4.3.5.3 Limits . 12
4.3.5.4 Conformance . 12
4.4 Receiver requirements . 12
4.4.1 General . 12
4.4.2 Wanted Technical Performance Criteria . 12
4.4.3 Receiver spurious emissions . 13
4.4.3.1 Applicability. 13
4.4.3.2 Description . 13
4.4.3.3 Limits . 13
4.4.3.4 Conformance . 14
4.4.4 Receiver Baseline Sensitivity (RBS) . 14
4.4.4.1 Applicability. 14
4.4.4.2 Description for the RBS requirements . 14
4.4.4.3 Limits . 14
4.4.4.4 Conformance . 14
4.4.5 Receiver Baseline Resilience (RBR) . 14
4.4.5.1 Applicability. 14
4.4.5.2 Description for the RBR requirement . 14
4.4.5.3 Limits . 14
ETSI
4 ETSI EN 300 440-2 V3.1.1 (2025-10)
4.4.5.4 Conformance . 15
5 Testing for compliance with technical requirements . 15
5.1 Environmental conditions for testing . 15
5.1.1 General . 15
5.1.2 Normal test conditions . 15
5.1.3 Complete environmental profile test conditions . 15
5.2 Conformance test suites and general conditions for testing . 16
5.3 Conformance methods of measurement for TX requirements . 16
5.3.1 Operating Frequency Range (OFR) . 16
5.3.2 RF output power . 16
5.3.3 TX unwanted emissions . 17
5.3.3.1 General . 17
5.3.3.2 TXUE OOB Domain . 17
5.3.3.3 TXUE Spurious domain . 17
5.3.4 TX behaviour . 17
5.4 Conformance methods of measurement for receiver . 18
5.4.1 Receiver spurious emissions . 18
5.4.2 General for RBS and RBR conformance tests . 18
5.4.3 RBS .
...

SLOVENSKI STANDARD
01-december-2025
Naprave kratkega dosega (SRD), ki delujejo v frekvenčnem območju od 1 GHz do
40 GHz - Harmonizirani standard za dostop do radijskega spektra - 2. del:
Radiodoločilna oprema za aplikacije za sledenje lokaciji, ki deluje v frekvenčnem
območju od 2,4 GHz do 2,4835 GHz
Short Range Devices (SRD) operating in 1 GHz to 40 GHz - Harmonised Standard for
access to radio spectrum - Part 2: Radiodetermination equipment for location tracking
applications operating in the frequency range 2,4 GHz to 2,4835 GHz
Ta slovenski standard je istoveten z: ETSI EN 300 440-2 V3.1.1 (2025-10)
ICS:
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

HARMONISED EUROPEAN STANDARD
Short Range Devices (SRD) operating in 1 GHz to 40 GHz;
Harmonised Standard for access to radio spectrum;
Part 2: Radiodetermination equipment for location tracking
applications operating in the frequency range
2,4 GHz to 2,4835 GHz
2 ETSI EN 300 440-2 V3.1.1 (2025-10)

Reference
REN/ERM-TG28-563
Keywords
radio, SRD, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver repository.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2025.
All rights reserved.
ETSI
3 ETSI EN 300 440-2 V3.1.1 (2025-10)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definition of terms, symbols and abbreviations . 8
3.1 Terms . 8
3.2 Symbols . 8
3.3 Abbreviations . 9
4 Technical requirements specifications . 9
4.1 Environmental profile . 9
4.2 Equipment categories . 9
4.3 Transmitter requirements . 10
4.3.1 General . 10
4.3.2 Operating Frequency Range (OFR) . 10
4.3.2.1 Applicability. 10
4.3.2.2 Description Operating Frequency Range . 10
4.3.2.3 Limits for Operating Frequency Range . 10
4.3.2.4 Conformance . 10
4.3.3 RF output power . 10
4.3.3.1 Applicability. 10
4.3.3.2 Description RF output power . 10
4.3.3.3 Limits for RF output power . 10
4.3.3.4 Conformance . 11
4.3.4 TX unwanted emissions (TXUE) . 11
4.3.4.1 Applicability. 11
4.3.4.2 Description TX unwanted emissions . 11
4.3.4.3 Limits for TX unwanted emissions . 11
4.3.4.4 Conformance . 11
4.3.5 TX behaviour . 12
4.3.5.1 Applicability. 12
4.3.5.2 Description . 12
4.3.5.3 Limits . 12
4.3.5.4 Conformance . 12
4.4 Receiver requirements . 12
4.4.1 General . 12
4.4.2 Wanted Technical Performance Criteria . 12
4.4.3 Receiver spurious emissions . 13
4.4.3.1 Applicability. 13
4.4.3.2 Description . 13
4.4.3.3 Limits . 13
4.4.3.4 Conformance . 14
4.4.4 Receiver Baseline Sensitivity (RBS) . 14
4.4.4.1 Applicability. 14
4.4.4.2 Description for the RBS requirements . 14
4.4.4.3 Limits . 14
4.4.4.4 Conformance . 14
4.4.5 Receiver Baseline Resilience (RBR) . 14
4.4.5.1 Applicability. 14
4.4.5.2 Description for the RBR requirement . 14
4.4.5.3 Limits . 14
ETSI
4 ETSI EN 300 440-2 V3.1.1 (2025-10)
4.4.5.4 Conformance . 15
5 Testing for compliance with technical requirements . 15
5.1 Environmental conditions for testing . 15
5.1.1 General . 15
5.1.2 Normal test conditions . 15
5.1.3 Complete environmental profile test conditions . 15
5.2 Conformance test suites and general conditions for testing . 16
5.3 Conformance methods of measurement for TX requirements . 16
5.3.1 Operating Frequency Range (OFR) . 16
5.3.2 RF output power . 16
5.3.3 TX unwanted emissions . 17
5.3.3.1 General .
...