SIST ETS 300 476-7:1999
(Main)Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 7: Physical layer
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 7: Physical layer
Conformance test specification for voluntary testing to ETS 300 175, Protocol Implementation Conformance Statement (PICS). Based upon CTS-3 project output.
Digitalne izboljšane brezvrvične telekomunikacije (DECT) - Skupni vmesnik (CI) - Proforma izjave o skladnosti izvedbe protokola (PICS) - 7. del: Fizična plast
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 7: Physical layer33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:ETS 300 476-7 E13SIST ETS 300 476-7:1999en01-jDQXDU-19993SIST ETS 300 476-7:1999SLOVENSKI
STANDARD
SIST ETS 300 476-7:1999
EUROPEANETS 300 476-7TELECOMMUNICATIONAugust 1996STANDARDSource: ETSI TC-RESReference: DE/RES-03042-7ICS:33.020, 33.060.50Key words:DECT, CI, PICSRadio Equipment and Systems (RES);Digital Enhanced Cordless Telecommunications (DECT);Common Interface (CI);Protocol Implementation Conformance Statement (PICS)proforma;Part 7: Physical layerETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.frTel.: +33 92 94 42 00 - Fax: +33 93 65 47 16Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1996. All rights reserved.SIST ETS 300 476-7:1999
Page 2ETS 300 476-7: August 1996Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Committee Support Dept." at the address shown on the title page.SIST ETS 300 476-7:1999
Page 3ETS 300 476-7: August 1996ContentsForeword.51Scope.72Normative references.73Definitions and abbreviations.83.1Definitions.83.2Abbreviations.84Conformance requirement concerning PICS.8Annex A (normative):Physical (PH) layer PICS proforma for PT.9A.1Introduction for completing the PICS proforma.9A.1.1Purposes and structure.9A.1.2Instruction for completing the PICS.11A.2Identification of the implementation.11A.2.1Date of statement.11A.2.2Implementation Under Test (IUT) identification.11A.2.3System Under Test (SUT) identification.11A.2.4Product supplier.12A.2.5Client.12A.2.6Contact person.12A.3Identification of the protocol.13A.3.1Defect report numbers and amendments implemented.13A.3.2Addenda implemented.13A.4Global statement of conformance.13A.5Capabilities.14A.5.1Major capabilities.14A.5.1.1Services.14A.5.1.2Procedures.15A.5.1.2.1Physical layer procedures.15A.5.1.2.2Management entity procedures.15A.5.2Protocol Data Units.15A.5.3Receiver/Transmitter characteristics.19A.5.3.1Transmitter characteristics.19A.5.3.2Receiver characteristics.19History.20SIST ETS 300 476-7:1999
Page 4ETS 300 476-7: August 1996QuestionsTable A.1: Date of Statement.11Table A.2: IUT identification.11Table A.3: SUT identification.11Table A.4: Product supplier.12Table A.5: Client.12Table A.6: Contact person.12Table A.7: Identification of protocol.13Table A.8: Defect report and amendments number.13Table A.9: Addenda implemented.13Table A.10: Global statement of conformance.13Table A.11: IUT Type.14Table A.12: PP Sevices supported.14Table A.13: RFP Sevices supported.14Table A.14: Physical channels supported.15Table A.15: PH layer procedures supported.15Table A.16: Management procedures supported.15Table A.17: Frame structure supported.15Table A.18: Packet types supported.16Table A.19: P00 packet supported F to P.16Table A.20: P00 packet supported P to F.16Table A.21: P32 packet supported F to P.17Table A.22: P32 packet supported P to F.17Table A.23: P08j (j=0) packet supported F to P.17Table A.24: P08j (j=0) packet supported P to F.18Table A.25: P80 packet supported F to P.18Table A.26: P80 packet supported P to F.18Table A.27: Transmitter requirements supported.19Table A.28: Receiver requirements supported.19SIST ETS 300 476-7:1999
Page 5ETS 300 476-7: August 1996ForewordThis European Telecommunication Standard (ETS) has been produced by the Radio Equipment andSystems (RES), Technical Committee of the European Telecommunications Standards Institute (ETSI).The DECT Common interface Protocol Implementation Conformance Statement (PICS) proformastandard comprises seven parts as follows:Part 1:"Network (NWK) layer - Portable radio Termination (PT)";Part 2:"Data Link Control (DLC) layer - Portable radio Termination (PT)";Part 3:"Medium Access Control (MAC) layer - Portable radio Termination (PT)";Part 4:"Network (NWK) layer - Fixed radio Termination (FT)";Part 5:"Data Link Control (DLC) layer - Fixed radio Termination (FT)";Part 6:"Medium Access Control (MAC) layer - Fixed radio Termination (FT)";Part 7:"Physical layer".Annex A contains the PICS proforma for the physical layer.Transposition datesDate of adoption of this ETS:16 August 1996Date of latest announcement of this ETS (doa):30 November 1996Date of latest publication of new National Standardor endorsement of this ETS (dop/e):31 May 1997Date of withdrawal of any conflicting National Standard (dow):31 May 1997SIST ETS 300 476-7:1999
Page 6ETS 300 476-7: August 1996Blank pageSIST ETS 300 476-7:1999
Page 7ETS 300 476-7: August 19961ScopeThis European Telecommunication Standard (ETS) provides the Protocol Implementation ConformanceStatement (PICS) proforma for the Digital Enhanced Cordless Telecommunications Network layer at thePortable Termination as defined in ETS 300 175 Part 2 [2] in compliance with the relevant requirementsand in accordance with the relevant guidance given in ISO/IEC 9646-7 [14].The supplier of an implementation which is claimed to conform to ETS 300 175 Part 2 [2] is required tocomplete a copy of the PICS proforma provided in the Annex A of this standard.2Normative referencesThis ETS incorporates, by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listedhereafter. For dated references, subsequent amendments to or revisions of any of these publicationsapply to this ETS only when incorporated in it by amendment or revision. For undated references the latestedition of the publication referred to applies.[1]ETS 300 175-1: "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Common Interface (CI); Part 1:Overview".[2]ETS 300 175-2: "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Common Interface (CI); Part 2: PhysicalLayer".[3]ETS 300 175-3: "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Common Interface (CI); Part 3: MediumAccess Control (MAC) layer".[4]ETS 300 175-4: "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Common Interface (CI); Part 4: DataLink Control (DLC) layer".[5]ETS 300 175-5: "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Common Interface (CI); Part 5: Network(NWK) layer".[6]ETS 300 175-6: "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Common Interface (CI); Part 6:Identities and addressing".[7]ETS 300 175-7: "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Common Interface (CI); Part 7: Securityfeatures".[8]ETS 300 175-8: "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Common Interface (CI); Part 8: Speechcoding and transmission".[9]ETS 300 175-9: "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Common Interface (CI); Part 9: PublicAccess Profile (PAP)".[10]ETS 300 406 (1995): "Methods for Testing and Specification (MTS); Protocoland profile conformance testing specifications; Standardization methodology".[11]ISO/IEC 9646-1 (1995): "Information technology - Open SystemsInterconnection - Conformance testing methodology and framework - Part 1:General concepts".SIST ETS 300 476-7:1999
Page 8ETS 300 476-7: August 1996[12]ISO/IEC 9646-7 (1995): "Information technology - Open SystemsInterconnection - Conformance testing methodology and framework - Part 7:Implementation Conformance Statements".[13]ETS 300 444 (1995): "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Generic Access Profile (GAP)”.3Definitions and abbreviations3.1DefinitionsFor the purposes of this ETS, the following terms and definitions apply:-terms defined in ETS 300 175-1 [1]-terms defined in ISO/IEC 9646-1 [11] and in ISO/IEC 9646-7 [12].In particular, the following terms defined in ISO/IEC 9646-1
apply:Implementation Conformance Statement (ICS): A statement made by the supplier of an implementationor system claimed to conform to a given specification, stating which capabilities have been implemented.The ICS can take several forms: protocol ICS, profile ICS, profile specific ICS, information object ICS, etc.ICS proforma: A document, in the form of a questionnaire, which when completed for an implementationor system becomes an ICS.Protocol ICS (PICS): A PICS for an implementation or system claimed to conform to a given protocolspecification.The following definition also applies:DECT Common Interface ICS: An ICS for an implementation or system claimed to conform to a givenDECT Common Interface specification.3.2AbbreviationsFor the purposes of this ETS, the abbreviations defined in ISO/IEC 9646-1 [11], the Physical layerabbreviations defined in ETS 300 175-2 [2], and the following abbreviations apply.ICSImplementation Conformance StatementIUTImplementation Under Testlen_blength specified as BITSTRINGlen_olength specified as OCTETSTRINGPICSProtocol Implementation Conformance StatementSCSSystem Conformance StatementSp.support(ed)Stat.StatusSUTSystem Under Testvalvalue (of the field)val_cC-plane connection valueval_p_cvalue parameter codingval_uU-plane connection value4Conformance requirement concerning PICSIf it claims to conform to this ETS, the actual PICS proforma to be filled in by a supplier shall be technicallyequivalent to the text of the PICS proforma given in annex A, and shall preserve the numbering/namingand ordering of the proforma items.An ICS which conforms to this ETS shall be a conforming PICS proforma completed in accordance withthe instructions for completion given in clause A.1.SIST ETS 300 476-7:1999
Page 9ETS 300 476-7: August 1996Annex A (normative):Physical (PH) layer PICS proforma for PTA.1Introduction for completing the PICS proformaNotwithstanding the provisions of the copyright clause related to the text of the present ETS (see frontpage), ETSI grants users of this ETS to freely reproduce the PICS Proforma in this annex so that it can beused for its intended purposes and may further publish the completed PICS.A.1.1Purposes and structureThe purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation ofthe portable termination specific data link control layer requirements of ETS 300 175-2 [2]: DECT PH layermay provide information about the implementation in a standardized manner.The PICS proforma is subdivided into subclauses for the following categories of information:-instructions for completing the PICS proforma;-id
...
SLOVENSKI STANDARD
SIST ETS 300 476-7:1999
01-maj-1999
'LJLWDOQHL]EROMãDQHEUH]YUYLþQHWHOHNRPXQLNDFLMH '(&7 6NXSQLYPHVQLN &,
3URIRUPDL]MDYHRVNODGQRVWLL]YHGEHSURWRNROD 3,&6 GHO )L]LþQDSODVW
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);
Protocol Implementation Conformance Statement (PICS) proforma; Part 7: Physical layer
Ta slovenski standard je istoveten z: ETS 300 476-7 Edition 1
ICS:
33.070.30 'LJLWDOQHL]EROMãDQH Digital Enhanced Cordless
EUH]YUYLþQHWHOHNRPXQLNDFLMH Telecommunications (DECT)
'(&7
SIST ETS 300 476-7:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ETS 300 476-7:1999
---------------------- Page: 2 ----------------------
SIST ETS 300 476-7:1999
EUROPEAN ETS 300 476-7
TELECOMMUNICATION August 1996
STANDARD
Source: ETSI TC-RES Reference: DE/RES-03042-7
ICS: 33.020, 33.060.50
Key words: DECT, CI, PICS
Radio Equipment and Systems (RES);
Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI);
Protocol Implementation Conformance Statement (PICS)
proforma;
Part 7: Physical layer
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.fr
Tel.: +33 92 94 42 00 - Fax: +33 93 65 47 16
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1996. All rights reserved.
---------------------- Page: 3 ----------------------
SIST ETS 300 476-7:1999
Page 2
ETS 300 476-7: August 1996
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.
---------------------- Page: 4 ----------------------
SIST ETS 300 476-7:1999
Page 3
ETS 300 476-7: August 1996
Contents
Foreword .5
1 Scope .7
2 Normative references.7
3 Definitions and abbreviations .8
3.1 Definitions .8
3.2 Abbreviations .8
4 Conformance requirement concerning PICS .8
Annex A (normative): Physical (PH) layer PICS proforma for PT .9
A.1 Introduction for completing the PICS proforma.9
A.1.1 Purposes and structure.9
A.1.2 Instruction for completing the PICS .11
A.2 Identification of the implementation.11
A.2.1 Date of statement .11
A.2.2 Implementation Under Test (IUT) identification .11
A.2.3 System Under Test (SUT) identification .11
A.2.4 Product supplier.12
A.2.5 Client.12
A.2.6 Contact person.12
A.3 Identification of the protocol .13
A.3.1 Defect report numbers and amendments implemented .13
A.3.2 Addenda implemented.13
A.4 Global statement of conformance .13
A.5 Capabilities.14
A.5.1 Major capabilities .14
A.5.1.1 Services.14
A.5.1.2 Procedures.15
A.5.1.2.1 Physical layer procedures.15
A.5.1.2.2 Management entity procedures .15
A.5.2 Protocol Data Units.15
A.5.3 Receiver/Transmitter characteristics .19
A.5.3.1 Transmitter characteristics.19
A.5.3.2 Receiver characteristics .19
History.20
---------------------- Page: 5 ----------------------
SIST ETS 300 476-7:1999
Page 4
ETS 300 476-7: August 1996
Questions
Table A.1: Date of Statement . 11
Table A.2: IUT identification. 11
Table A.3: SUT identification . 11
Table A.4: Product supplier . 12
Table A.5: Client . 12
Table A.6: Contact person. 12
Table A.7: Identification of protocol . 13
Table A.8: Defect report and amendments number . 13
Table A.9: Addenda implemented . 13
Table A.10: Global statement of conformance . 13
Table A.11: IUT Type. 14
Table A.12: PP Sevices supported. 14
Table A.13: RFP Sevices supported. 14
Table A.14: Physical channels supported. 15
Table A.15: PH layer procedures supported. 15
Table A.16: Management procedures supported . 15
Table A.17: Frame structure supported. 15
Table A.18: Packet types supported. 16
Table A.19: P00 packet supported F to P. 16
Table A.20: P00 packet supported P to F. 16
Table A.21: P32 packet supported F to P. 17
Table A.22: P32 packet supported P to F. 17
Table A.23: P08j (j=0) packet supported F to P . 17
Table A.24: P08j (j=0) packet supported P to F . 18
Table A.25: P80 packet supported F to P. 18
Table A.26: P80 packet supported P to F. 18
Table A.27: Transmitter requirements supported. 19
Table A.28: Receiver requirements supported. 19
---------------------- Page: 6 ----------------------
SIST ETS 300 476-7:1999
Page 5
ETS 300 476-7: August 1996
Foreword
This European Telecommunication Standard (ETS) has been produced by the Radio Equipment and
Systems (RES), Technical Committee of the European Telecommunications Standards Institute (ETSI).
The DECT Common interface Protocol Implementation Conformance Statement (PICS) proforma
standard comprises seven parts as follows:
Part 1: "Network (NWK) layer - Portable radio Termination (PT)";
Part 2: "Data Link Control (DLC) layer - Portable radio Termination (PT)";
Part 3: "Medium Access Control (MAC) layer - Portable radio Termination (PT)";
Part 4: "Network (NWK) layer - Fixed radio Termination (FT)";
Part 5: "Data Link Control (DLC) layer - Fixed radio Termination (FT)";
Part 6: "Medium Access Control (MAC) layer - Fixed radio Termination (FT)";
Part 7: "Physical layer".
Annex A contains the PICS proforma for the physical layer.
Transposition dates
Date of adoption of this ETS: 16 August 1996
Date of latest announcement of this ETS (doa): 30 November 1996
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 31 May 1997
Date of withdrawal of any conflicting National Standard (dow): 31 May 1997
---------------------- Page: 7 ----------------------
SIST ETS 300 476-7:1999
Page 6
ETS 300 476-7: August 1996
Blank page
---------------------- Page: 8 ----------------------
SIST ETS 300 476-7:1999
Page 7
ETS 300 476-7: August 1996
1 Scope
This European Telecommunication Standard (ETS) provides the Protocol Implementation Conformance
Statement (PICS) proforma for the Digital Enhanced Cordless Telecommunications Network layer at the
Portable Termination as defined in ETS 300 175 Part 2 [2] in compliance with the relevant requirements
and in accordance with the relevant guidance given in ISO/IEC 9646-7 [14].
The supplier of an implementation which is claimed to conform to ETS 300 175 Part 2 [2] is required to
complete a copy of the PICS proforma provided in the Annex A of this standard.
2 Normative references
This ETS incorporates, by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this ETS only when incorporated in it by amendment or revision. For undated references the latest
edition of the publication referred to applies.
[1] ETS 300 175-1: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 1:
Overview".
[2] ETS 300 175-2: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 2: Physical
Layer".
[3] ETS 300 175-3: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 3: Medium
Access Control (MAC) layer".
[4] ETS 300 175-4: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 4: Data
Link Control (DLC) layer".
[5] ETS 300 175-5: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 5: Network
(NWK) layer".
[6] ETS 300 175-6: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 6:
Identities and addressing".
[7] ETS 300 175-7: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 7: Security
features".
[8] ETS 300 175-8: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 8: Speech
coding and transmission".
[9] ETS 300 175-9: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 9: Public
Access Profile (PAP)".
[10] ETS 300 406 (1995): "Methods for Testing and Specification (MTS); Protocol
and profile conformance testing specifications; Standardization methodology".
[11] ISO/IEC 9646-1 (1995): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 1:
General concepts".
---------------------- Page: 9 ----------------------
SIST ETS 300 476-7:1999
Page 8
ETS 300 476-7: August 1996
[12] ISO/IEC 9646-7 (1995): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 7:
Implementation Conformance Statements".
[13] ETS 300 444 (1995): "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Generic Access Profile (GAP)”.
3 Definitions and abbreviations
3.1 Definitions
For the purposes of this ETS, the following terms and definitions apply:
- terms defined in ETS 300 175-1 [1]
- terms defined in ISO/IEC 9646-1 [11] and in ISO/IEC 9646-7 [12].
In particular, the following terms defined in ISO/IEC 9646-1 apply:
Implementation Conformance Statement (ICS): A statement made by the supplier of an implementation
or system claimed to conform to a given specification, stating which capabilities have been implemented.
The ICS can take several forms: protocol ICS, profile ICS, profile specific ICS, information object ICS, etc.
ICS proforma: A document, in the form of a questionnaire, which when completed for an implementation
or system becomes an ICS.
Protocol ICS (PICS): A PICS for an implementation or system claimed to conform to a given protocol
specification.
The following definition also applies:
DECT Common Interface ICS: An ICS for an implementation or system claimed to conform to a given
DECT Common Interface specification.
3.2 Abbreviations
For the purposes of this ETS, the abbreviations defined in ISO/IEC 9646-1 [11], the Physical layer
abbreviations defined in ETS 300 175-2 [2], and the following abbreviations apply.
ICS Implementation Conformance Statement
IUT Implementation Under Test
len_b length specified as BITSTRING
len_o length specified as OCTETSTRING
PICS Protocol Implementation Conformance Statement
SCS System Conformance Statement
Sp. support(ed)
Stat. Status
SUT System Under Test
val value (of the field)
val_c C-plane connection value
val_p_c value parameter coding
val_u U-plane connection value
4 Conformance requirement concerning PICS
If it claims to conform to this ETS, the actual PICS proforma to be filled in by a supplier shall be technically
equivalent to the text of the PICS proforma given in annex A, and shall preserve the numbering/naming
and ordering of the proforma items.
An ICS which conforms to this ETS shall be a conforming PICS proforma completed in accordance with
the instructions for completion given in clause A.1.
---------------------- Page: 10 ----------------------
SIST ETS 300 476-7:1999
Page 9
ETS 300 476-7: August 1996
Annex A (normative): Physical (PH) layer PICS proforma for PT
A.1 Introduction for completing the PICS proforma
Notwithstanding the provisions of the copyright clause related to the text of the present ETS (see front
page), ETSI grants users of this ETS to freely reproduce the PICS Proforma in this annex so that it can be
used for its intended purposes and may further publish the completed PICS.
A.1.1 Purposes and structure
The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of
the portable termination specific data link control layer requirements of ETS 300 175-2 [2]: DECT PH layer
may provide information about the implementation in a standardized manner.
The PICS proforma is subdivided into subclauses for the following categories of information:
- instructions for completing the PICS proforma;
- identification of the implementation;
- identification of the ETS 300 175-2 [2]: DECT PH layer;
- PICS proforma tables;
- global statement of conformance;
- functional groups and procedures;
- timers an
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.