SIST EN 60512-99-001:2012

Test schedule for engaging and separating connectors under electrical load -- Part 60512-99-001: Connectors used in twisted pair communication cabling with remote power

This part of IEC 60512 is used for the assessment of connectors within the scope of SC 48B that are used in twisted pair communication cabling with remote power, such as ISO/IEC 11801 Class D, or better, balanced cabling in support of IEEE Std 802.3at™-2009 (PoE Plus - Power over Ethernet Plus). The object of this standard is to detail a test schedule to determine the ability of connectors to withstand a minimal number of engagements and separations when an electrical current is being passed through the connector in accordance with IEC 60512-9-3.

Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 99-001: Prüfablaufplan für Steckverbinder zum Stecken und Ziehen mit elektrischer Belastung - Prüfung 99a: Steckverbinder für die Anwendung in paarverseilter Kommunikationsverkabelung mit Fernspeisung

Programme d'essai relatif aux connexions et déconnexions sous charge électrique – Partie 60512-99-001: Connecteurs utilisés dans le câblage de communication à paires torsadées permettant une alimentation à distance

La CEI 60512-99-001:2012 est utilisée pour l'évaluation des connecteurs entrant dans le domaine d'application du SC 48B, qui sont utilisés dans le câblage de communication à paires torsadées permettant une alimentation à distance, comme par exemple la Classe D de l'ISO/CEI 11801, ou plus, le câblage à paires symétriques associé aux applications de l'IEEE 802.3 at (PoE Plus - Power over Ethernet Plus). Cette norme a pour objet de détailler un programme d'essai afin de déterminer l'aptitude des connecteurs à résister à un nombre limité de connexions et déconnexions, lorsqu'un courant électrique circule à travers le connecteur, conformément à la CEI 60512-9-3. Mots clé: connecteurs, connexions et déconnexions

Načrt preskušanja za stikanje in ločevanje konektorjev pod električno obremenitvijo - 60512-99-001. del: Konektorji za komunikacijske kable s posukanimi pari in oddaljenim napajanjem

Ta del standarda IEC 60512 se uporablja za ocenjevanje konektorjev v obsegu SC 48B, ki se uporabljajo za komunikacijske kable s posukanimi pari in oddaljenim napajanjem, kot so ISO/IEC 11801 razred D, ali boljše, uravnoteženih kablih, ki podpirajo standard IEEE 802.3at™-2009 (PoE Plus - napajanje čez ethernet plus). Cilj tega standarda je, da določi načrt preskušanja in zmožnost konektorjev, da zdržijo najmanjšo število stikov in ločevanj, ko skozi njih teče električni tok v skladu s standardom IEC 60512-9-3.

General Information

• Status: Published
• Publication Date: 29-Oct-2012
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 25-Oct-2012
• Due Date: 30-Dec-2012
• Completion Date: 30-Oct-2012
• Ref Project: EN 60512-99-001:2012 - Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60512-99-001:2012
01-december-2012
1DþUWSUHVNXãDQMD]DVWLNDQMHLQORþHYDQMHNRQHNWRUMHYSRGHOHNWULþQR
REUHPHQLWYLMRGHO.RQHNWRUML]DNRPXQLNDFLMVNHNDEOHV
SRVXNDQLPLSDULLQRGGDOMHQLPQDSDMDQMHP
Test schedule for engaging and separating connectors under electrical load -- Part
60512-99-001: Connectors used in twisted pair communication cabling with remote
power
Programme d'essai relatif aux connexions et déconnexions sous charge électrique –
Partie 60512-99-001: Connecteurs utilisés dans le câblage de communication à paires
torsadées permettant une alimentation à distance
Ta slovenski standard je istoveten z: EN 60512-99-001:2012
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
SIST EN 60512-99-001:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60512-99-001:2012

---------------------- Page: 2 ----------------------

SIST EN 60512-99-001:2012

EUROPEAN STANDARD
EN 60512-99-001

NORME EUROPÉENNE
October 2012
EUROPÄISCHE NORM

ICS 31.220.10

English version


Connectors for electronic equipment -
Tests and measurements -
Part 99-001: Test schedule for engaging and separating connectors
under electrical load -
Test 99a: Connectors used in twisted pair communication cabling
with remote power
(IEC 60512-99-001:2012)

Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Essais et mesures - Einrichtungen - Mess- und Prüfverfahren -
Partie 99-001: Programme d'essai relatif Teil 99-001: Prüfablaufplan für
aux connexions et déconnexions Steckverbinder zum Stecken und Ziehen
sous charge électrique - mit elektrischer Belastung -
Essai 99a: Connecteurs utilisés Prüfung 99a: Steckverbinder
dans le câblage de communication für die Anwendung in paarverseilter
à paires torsadées permettant Kommunikationsverkabelung
une alimentation à distance mit Fernspeisung
(CEI 60512-99-001:2012) (IEC 60512-99-001:2012)

This European Standard was approved by CENELEC on 2012-09-17. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60512-99-001:2012 E

---------------------- Page: 3 ----------------------

SIST EN 60512-99-001:2012
EN 60512-99-001:2012 - 2 -
Foreword
The text of document 48B/2291/FDIS, future edition 1 of IEC 60512-99-001, prepared by 48B
"Connectors" of IEC/TC 48 "Electromechanical components and mechanical structures for electronic
equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 60512-99-001:2012.
The following dates are fixed:
(dop) 2013-06-17
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-09-17
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 60512-99-001:2012 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60512-1-1 NOTE Harmonised as EN 60512-1-1.
IEC 60512-2-1 NOTE Harmonised as EN 60512-2-1.
IEC 60512-3-1 NOTE Harmonised as EN 60512-3-1.
IEC 60512-4-1 NOTE Harmonised as EN 60512-4-1.
IEC 60512-11-7 NOTE Harmonised as EN 60512-11-7.

---------------------- Page: 4 ----------------------

SIST EN 60512-99-001:2012
- 3 - EN 60512-99-001:2012
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60512 Series Connectors for electronic equipment - EN 60512 Series
Tests and measurements


IEC 60512-1-100 - Connectors for electronic equipment - EN 60512-1-100 -
Tests and measurements -
Part 1-100: General - Applicable publications


IEC 60512-9-3 2011 Connectors for electronic equipment - EN 60512-9-3 2011
Tests and measurements -
Part 9-3: Endurance tests - Test 9c:
Mechanical operation (engaging and
separating) with electrical load


IEC 61156 Series Multicore and symmetrical pair/quad cables - -
for digital communications

---------------------- Page: 5 ----------------------

SIST EN 60512-99-001:2012

---------------------- Page: 6 ----------------------

SIST EN 60512-99-001:2012



IEC 60512-99-001

®


Edition 1.0 2012-08




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Connectors for electronic equipment – Tests and measurements –

Part 99-001: Test schedule for engaging and separating connectors under

electrical load – Test 99a: Connectors used in twisted pair communication


cabling with remote power



Connecteurs pour équipements électroniques – Essais et mesures –


Partie 99-001: Programme d'essai relatif aux connexions et déconnexions sous

charge électrique – Essai 99a: Connecteurs utilisés dans le câblage de

communication à paires torsadées permettant une alimentation à distance










INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

PRICE CODE
INTERNATIONALE

CODE PRIX L


ICS 31.220.10 ISBN 978-2-88912-000-0



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 60512-99-001:2012
– 2 – 60512-99-001 © IEC:2012
CONTENTS

FOREWORD . 3
1 Scope and object . 5
2 Normative references . 5
3 General . 5
4 Preparation of specimen . 6
5 Test circuit requirements . 6
5.1 General . 6
5.2 Voltage and current . 6
5.3 Auxiliary equipment . 7
6 Tests and test schedule . 7
6.1 Test group UEL 1 . 7
Annex A (informative) Test voltage and current setting instructions . 10
Bibliography . 11

Figure 1 – Test circuit details . 6

Table 1 – Test group UEL 1 . 7

---------------------- Page: 8 ----------------------

SIST EN 60512-99-001:2012
60512-99-001 © IEC:2012 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

CONNECTORS FOR ELECTRONIC EQUIPMENT –
TESTS AND MEASUREMENTS –

Part 99-001: Test schedule for engaging and separating
connectors under electrical load –
Test 99a: Connectors used in twisted pair
communication cabling with remote power

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60512-99-001 has been prepared by subcommittee 48B:
Connectors, of IEC technical committee 48: Electromechanical components and mechanical
structures for electronic equipment.
The text of this standard is based on the following documents:
FDIS Report on voting
48B/22
...