Services and Protocols for Advanced Networks (SPAN) – Network Integration Testing between H.323, ISDN and PSTN – Part 1: Test Suite Structure and Test purposes (TSS&TP)

This document specifies the framework of Test Suite Structure and Test Purposes (TSS&TP) for Network Integration Testing (NIT) to verify the overall compatibility of H.323, ISDN and non-ISDN (PSTN) over the user network interface or over the national or international ISUP between networks.

Storitve in protokoli za napredna omrežja (SPAN) – Preskušanje integracije omrežja med H.323, ISDN in PSTN – 1. del: Zgradba preskušalnega niza in namen preskušanja (TSS&TP)

General Information

Status
Published
Publication Date
31-Dec-2004
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jan-2005
Due Date
01-Jan-2005
Completion Date
01-Jan-2005

Buy Standard

Technical specification
TS ETSI/TS 102 169-1 V1.1.1:2005
English language
83 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS ETSI/TS 102 169-1 V1.1.1:2005
01-januar-2005
Storitve in protokoli za napredna omrežja (SPAN) – Preskušanje integracije
omrežja med H.323, ISDN in PSTN – 1. del: Zgradba preskušalnega niza in namen
preskušanja (TSS&TP)
Services and Protocols for Advanced Networks (SPAN) – Network Integration Testing
between H.323, ISDN and PSTN – Part 1: Test Suite Structure and Test purposes
(TSS&TP)
Ta slovenski standard je istoveten z: ETSI TS 102 169-1 V1.1.1 (2003-02)
ICS:
33.040.40 Podatkovna komunikacijska Data communication
omrežja networks
SIST-TS ETSI/TS 102 169-1 V1.1.1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS ETSI/TS 102 169-1 V1.1.1:2005

---------------------- Page: 2 ----------------------

SIST-TS ETSI/TS 102 169-1 V1.1.1:2005

ETSI TS 102 169-1 V1.1.1 (2003-02)
Technical Specification


Services and Protocols for Advanced Networks (SPAN);
Network Integration Testing between H.323, ISDN and PSTN;
Part 1: Test Suite Structure and Test purposes (TSS&TP)

---------------------- Page: 3 ----------------------

SIST-TS ETSI/TS 102 169-1 V1.1.1:2005
 2 ETSI TS 102 169-1 V1.1.1 (2003-02)



Reference
DTS/SPAN-130303-1
Keywords
H.323, NIT, testing, TSS&TP
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, send your comment to:
editor@etsi.org
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2003.
All rights reserved.

TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 4 ----------------------

SIST-TS ETSI/TS 102 169-1 V1.1.1:2005
 3 ETSI TS 102 169-1 V1.1.1 (2003-02)
Contents
Intellectual Property Rights.5
Foreword.5
1 Scope.6
2 References.6
3 Definitions and abbreviations.8
3.1 Definitions.8
3.2 Abbreviations.8
4 Architecture and Test Suite Structure (TSS).9
4.1 Architecture.9
4.2 Test Suite Structure (TSS).10
4.2.1 ISDN-H.323.10
4.2.2 H.323-ISDN.10
4.2.3 PSTN-H.323.11
4.2.4 H.323-PSTN.11
4.2.5 H.323-H.323 (PC-PC).11
5 Numbering Scheme.12
6 Test purposes.13
6.1 Test purposes for ISDN-H.323 Basic call Successful -Speech .13
6.2 Test purposes for ISDN-H.323 Basic call Successful - 3,1 kHz audio.18
6.3 Test purposes for ISDN-H.323 Basic call Successful -UDI.25
6.4 Test purposes for ISDN-H.323 Basic call Unsuccessful .31
6.5 Test purposes for ISDN-H.323 Basic call Unsuccessful -UDI/TA .35
6.6 Test purposes for ISDN-H.323 Supplementary services .35
6.7 Test purposes for H.323-ISDN, Basic call, Successful speech .40
6.8 Test purposes for H.323-ISDN, Basic call, Successful 3,1 kHz.47
6.9 Test purposes for H.323-ISDN, Basic call, UDI .53
6.10 Test purposes for H.323-ISDN, Basic call, Unsuccessful .58
6.11 Test purposes for H.323- ISDN Supplementary services .60
6.12 Test purposes for H.323-PSTN, Basic call, Successful - Speech .64
6.13 Test purposes for H.323-PSTN, Basic call, Successful - 3,1 kHz audio .66
6.14 Test purposes for H.323-PSTN, Basic call, Unsuccessful.67
6.15 Test purposes for PSTN-H.323, Basic call.69
6.16 Test purposes for PSTN-H.323, Unsuccessful .70
6.17 Test purposes for H.323-H.323 Basic call, Successful.71
6.18 Test purposes for H.323-H.323 Basic call, Unsuccessful.76
Annex A (normative): Bearer capability default encoding for ISDN calling terminal
equipment and H.323 called terminal equipment (H.225 § 7.2.2.1.1) .79
A.1 Request and recognition of a circuit-mode bearer service .79
A.1.1 Circuit-mode 64 kbit/s 8 kHz structured bearer service category usable for speech information transfer .79
A.1.1.1 Request by a ISDN calling terminal equipment.79
A.1.1.2 Compatibility at the called H.323 terminal equipment .79
A.1.2 Circuit-mode 64 kbit/s unrestricted 8 kHz structured bearer service category.80
A.1.2.1 Request by a ISDN calling terminal equipment.80
A.1.2.2 Compatibility at the called H.323 terminal equipment .80
A.1.2.3 ISDN connections involving restricted 64 kbit/s transfer capability .80
A.1.2.3.1 Request by a calling ISDN terminal connected to a network supporting 64 kbit/s unrestricted
digital information transfer .80
A.1.2.3.2 Compatibility at the called H.323 terminal equipment connected to a network supporting 64
kbit/s unrestricted digital information transfer.81
A.1.2.3.3 Request by a calling ISDN terminal connected to a network supporting 64 kbit/s restricted digital
information transfer.81
ETSI

---------------------- Page: 5 ----------------------

SIST-TS ETSI/TS 102 169-1 V1.1.1:2005
 4 ETSI TS 102 169-1 V1.1.1 (2003-02)
A.1.2.3.4 Compatibility at the called H.323 terminal equipment connected to a network using restricted
digital information transfer .81
A.1.3 Circuit-mode 64 kbit/s 8 kHz structured bearer service category usable for 3,1 kHz audio information
transfer.82
A.1.3.1 Request by a ISDN calling terminal equipment.82
A.1.3.2 Compatibility at the H.323 called terminal equipment .82
History .83

ETSI

---------------------- Page: 6 ----------------------

SIST-TS ETSI/TS 102 169-1 V1.1.1:2005
 5 ETSI TS 102 169-1 V1.1.1 (2003-02)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
All published ETSI deliverables shall include information which directs the reader to the above source of information.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Services and Protocols for
Advanced Networks (SPAN).
The present document is part 1 of a multi-part deliverable covering the Network Integration Testing between H.323,
ISDN and PSTN, as identified below:
Part 1: "Test Suite Structure and Test purposes (TSS&TP)";
Part 2: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)
proforma specification".
ETSI

---------------------- Page: 7 ----------------------

SIST-TS ETSI/TS 102 169-1 V1.1.1:2005
 6 ETSI TS 102 169-1 V1.1.1 (2003-02)
1 Scope
The present document specifies the Test Suite Structure and Test Purposes (TSS&TP) for Network Integration Testing
(NIT) to verify the overall compatibility of ITU-T Recommendation H.323 [3], ISDN and non-ISDN (PSTN) over the
national or international ISUP between networks. The TSS&TP specification covers the procedures described in
ITU-T Recommendation H.323 [3] , ITU-T Recommendation H.225.0 [4] as specified in TS 101 883 [1] and
ITU-T Recommendation Q.931 [5]".
All test purposes are written with reference to ITU-T Recommendation H.246 annex C [10] which implies the following
test architecture:
SUT


H.323 ISmapping UP mapping ISDN
H.323
ISDN
H.323->ISUP ISUP->ISDN
terminal
terminal

H.246
annex C (Q.699)



H.323-ISDN inter-working testing architecture via ISUP
Two mapping functions are involved. They are specified in ITU-T Recommendation H.246 annex C [10]
(H.323-ISUP) and ITU-T Recommendation Q.699 [23] (ISDN-ISUP).
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
[1] ETSI TS 101 883: "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3; Technology Mapping; Implementation of TIPHON architecture using
H.323".
[2] Void.
[3] ITU-T Recommendation H.323 (2000): "Packet-based multimedia communication".
[4] ITU-T Recommendation H.225.0 (2000): "Call signalling protocols and media stream
packetization for packet-based multimedia communication systems".
[5] ITU-T Recommendation Q.931: "ISDN user-network interface layer 3 specification for basic call
control".
ETSI

---------------------- Page: 8 ----------------------

SIST-TS ETSI/TS 102 169-1 V1.1.1:2005
 7 ETSI TS 102 169-1 V1.1.1 (2003-02)
[6] ISO/IEC 9646-1: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 1: General concepts".
[7] ISO/IEC 9646-2: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 2: Abstract Test Suite specification".
[8] ISO/IEC 9646-3: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 3: The Tree and Tabular Combined Notation (TTCN)".
[9] ITU-T Recommendation H.245 (2001): "Control protocol for multimedia communication.
[10] ITU-T Recommendation H.246 annex C (2000): "ISDN User Part Function - H.225.0
Interworking".
[11] ETSI EN 300 403-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling
System No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control;
Part 1: Protocol specification [ITU-T Recommendation Q.931 (1993), modified]".
[12] Void.
[13] ETSI TBR 008: "Integrated Services Digital Network (ISDN); Telephony 3,1 kHz teleservice;
Attachment requirements for handset terminals".
[14] ETSI EG 201 018: "Integrated Services Digital Network (ISDN);Application of the Bearer
Capability (BC), High Layer Compatibility (HLC) and Low Layer Compatibility (LLC)
information elements by terminals supporting ISDN services".
[15] ETSI ETS 300 092-1: "Integrated Services Digital Network (ISDN); Calling Line Identification
Presentation (CLIP) supplementary service; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
[16] ETSI ETS 300 093-1: "Integrated Services Digital Network (ISDN); Calling Line Identification
Restriction (CLIR) supplementary service; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
[17] ETSI ETS 300 097-1: "Integrated Services Digital Network (ISDN); Connected Line Identification
Presentation (COLP) supplementary service; Digital Subscriber Signalling System No. one
(DSS1) protocol; Part 1: Protocol specification".
[18] ETSI ETS 300 098-1: "Integrated Services Digital Network (ISDN); Connected Line Identification
Restriction (COLR) supplementary service; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
[19] ETSI ETS 300 267-1: "Integrated Services Digital Network (ISDN); Telephony 7 kHz and
videotelephony teleservices; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[20] ETSI ETR 018: "Integrated Services Digital Network (ISDN); Application of the Bearer
Capability (BC), High Layer Compatibility (HLC) and Low Layer Compatibility (LLC)
information elements by terminals supporting ISDN services".
[21] ETSI ETS 300 092-1/Amendment 2: "Integrated Services Digital Network (ISDN); Calling Line
Identification Presentation (CLIP) supplementary service; Digital Subscriber Signalling System
No. one (DSS1) protocol; Part 1: Protocol specification".
[22] ETSI ETS 300 097-1/Amendment 1: "Integrated Services Digital Network (ISDN); Connected
Line Identification Presentation (COLP) supplementary service; Digital Subscriber Signalling
System No. one (DSS1) protocol; Part 1: Protocol specification".
[23] ITU-T Recommendation Q.699: "Interworking between ISDN access and non-ISDN access over
ISDN User Part of Signalling System No. 7".
ETSI

---------------------- Page: 9 ----------------------

SIST-TS ETSI/TS 102 169-1 V1.1.1:2005
 8 ETSI TS 102 169-1 V1.1.1 (2003-02)
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
• terms defined in ITU-T Recommendation H.323 [3];
• terms defined in ITU-T Recommendation H.225.0 [4];
• terms defined in ISO/IEC 9646 parts 1 [6] to 3 [8].
Basic Call Control (BCC): signalling protocol associated with the DSS1 - ISDN Basic Call control procedures of
ITU-T Recommendation Q.931 (EN 300 403-1)
inopportune: specifies a test purpose covering a signalling procedure where an inopportune message (type of message
not expected in the IUT current state) is sent to the IUT
syntactically invalid: specifies a test purpose covering a signalling procedure where a valid (expected in the current
status of the IUT) but not correctly encoded (unknown or incorrect parameter values) message is sent to the IUT, which
shall react correctly and eventually reject the message
test purpose: non-formal test description, mainly using text. This test description can be used as the basis for a formal
test specification (e.g. Abstract Test Suite in TTCN). See ISO/IEC 9646.
valid: specifies a test purpose covering a signalling procedure where all the messages sent to or received from the IUT
are valid (expected in the current status of the IUT) and correctly encoded
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
I Inopportune
IPTN IP Transmit Network
IUT Implementation Under Test
PICS Protocol Implementation Conformance Statement
PIXIT Protocol Implementation eXtra Information for Testing
S Syntactically invalid
SCN Switched Circuit Network
TP Test Purpose
TSS Test Suite Structure
V Valid
ETSI

---------------------- Page: 10 ----------------------

SCN plane
SIST-TS ETSI/TS 102 169-1 V1.1.1:2005
 9 ETSI TS 102 169-1 V1.1.1 (2003-02)
4 Architecture and Test Suite Structure (TSS)
4.1 Architecture
Figure 1 shows the different types of networks that may inter-operate for calls. A specific call may not involve all
network types. Each network will include any required interconnecting and interworking functions.
Home
IPTN
Originating Intermediate Terminating
IPTN IPTN IPTN
Originating Intermediate Terminating
SCN SCN SCN

Figure 1: Network architecture
Management plane
Accounting Accounting
A A
S5 S5
Network FG Gateway FG
Terminal FG
User
User-Service
CR
QoSP CR QoSP
Profile Profile
Note
S1 S2 S3 S4
S1 S2 S4 S3
R2 R2
R1 SC2’
SC SC SC SC
TREG SREG IREG HREG
SC1
SC2
C2
C3
C1 SC2
CC CC CC
C2
C1 C3
BC
BC BC
N1
N3
N2
M2
M1 M3
MC MC MC
T1 T2
T2
TRM TRM TRM

Figure 2: General reference configuration
ETSI
IP Transport Plane
Service
Service
control
Media Call control
Bearer

---------------------- Page: 11 ----------------------

SIST-TS ETSI/TS 102 169-1 V1.1.1:2005
 10 ETSI TS 102 169-1 V1.1.1 (2003-02)
4.2 Test Suite Structure (TSS)
4.2.1 ISDN-H.323
C - Plane /U - Plane
Basic_Call Successful Speech IH___ SP __ xx
  3,1 kHz audio IH___ AU __ xx
  UDI IH___ UD __ xx


C - Plane Unsuccessful IH____xx___Uxx
Supplementary
Services  CLIP IH___xxSSCLIP xx
  CLIR IH___xxSSCLIR xx
  COLP IH___xxSSCOLP xx
  COLR IH___xxSSCOLR xx

4.2.2 H.323-ISDN


C - Plane /U - Plane
Basic_Call Successful Speech HI___ SP ___xx
  3,1 kHz audio HI___ AU ___xx
  UDI HI___ UD __ _xx


C - Plane Unsuccessful HI___ xx __ Uxx
Supplementary
Services  CLIP HI___xxSSCLIP xx
  CLIR HI___xxSSCLIR xx
  COLP HI___xxSSCOLP xx
  COLR HI___xxSSCOLR xx

ETSI

---------------------- Page: 12 ----------------------

SIST-TS ETSI/TS 102 169-1 V1.1.1:2005
 11 ETSI TS 102 169-1 V1.1.1 (2003-02)
4.2.3 PSTN-H.323


C - Plane /U - Plane
Basic_Call Successful  PH___ AU __ xx


 Unsuccessful PH___ AU __Uxx

4.2.4 H.323-PSTN


C - Plane /U - Plane
Basic_Call Successful Speech HP___ SP __ xx
  3,1 kHz audio HP___ AU __ xx


 Unsuccessful HP___ xx __U xx

4.2.5 H.323-H.323 (PC-PC)


C - Plane /U - Plane
Basic_Call Successful  HH___xx __ xx


 Unsuccessful HH___xx __ Uxx

ETSI

---------------------- Page: 13 ----------------------

SIST-TS ETSI/TS 102 169-1 V1.1.1:2005
 12 ETSI TS 102 169-1 V1.1.1 (2003-02)
5 Numbering Scheme
Pos. 1: Network of the A-Subscriber
Pos. 2: Network of the B-Subscriber
Pos. 3: Network of the C-Subscriber
Pos. 4: Network of the D-Subscriber
Pos. 5: Network of the E-Subscriber
The following Network Codes apply:
_: No such network used (used e.g. for C-Subscriber in successful A to B Calls)
(underscore makes it easier to read the name)
P: PSTN
I: ISDN
H: H.323
(Extensions will be added when needed)
Pos. 6 and 7: Bearer- or Teleservice involved
xx: defined per PIXIT value
NOTE: This may be appropriate for Test Purposes (provided the Test Purpose states for which Bearer- and/or
Tele Services it should be tested). It is however NOT appropriate for Test Cases since it would be
detrimental to Test Automation
SP: Speech
AU: 3,1 kHz Audio
UD: UDI
UT: UDI/TA
Pos. 8 and 9:
__: No Supplementary Services Involved /Successful
_U: No Supplementary Services Involved /Unsuccessful
SS: Supplementary Services Involved
SI: Supplementary Services interaction
SN: Nonsymmetrical Supplementary Services Involved
ST: Supplementary Services transparent
Speech IH___SP__xx

1 2 3 4 5 6 7 8 9 10 11
I H _ _ _ S P _ _ x x

ETSI

---------------------- Page: 14 ----------------------

SIST-TS ETSI/TS 102 169-1 V1.1.1:2005
 13 ETSI TS 102 169-1 V1.1.1 (2003-02)
Supplementary Services
CLIP IH___xxSSCLIP xx

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
I H _ _ _ X X S S C L I P x x

6 Test purposes
6.1 Test purposes for ISDN-H.323 Basic call Successful -
Speech
Successful
Speech

IH___SP__01 ISDN ref. to: PBN ref. to:
Q.931 [5], § 5.1.5.1 H.225.0 [4] § 7.2.2.1, § 7.3.10, § 7.3.2
Q.699 [23], § 2.1.1 TS 101 883 [1] § 5.1, § B.1.3.8, § B.1.3.2
H.246 annex C [10] § C.7.1
TSS reference: ISDN-H.323 [3]/Basic_call/Successful/Speech
Selection criteria:

Test purpose:
Ensure that call establishment using en-bloc sending is performed correctly.
Ensure that the SETUP message on the H.323 [3] interface is sent including the
fastStart field and on receipt of a CALL PROCEEDING message including the fastStart
field, call establishment continues.
Ensure that in the active call state (N10) the voice transfer on the media and B-channels
is performed correctly (e.g. testing QoS parameters).
The fastStart element indicates the CODEC value in a H.245 [9] OpenLogicalChannel
structure.
ISDN Parameter BC=speech, no HLC
values:
H.323 [3] Parameter BC=speech, no HLC
values:
Comments:


IH___SP__02 ISDN ref. to: PBN ref. to:
Q.931 [5], § 5.1.5.1 H.225.0 [4] § 7.2.2.1, § 7.3.10, § 7.3.2
Q.699 [23], § 2.1.1 TS 101 883 [1] § 5.1, § B.1.3.8, § B.1.3.1
H.246 annex C [10] § C.7.1
TSS reference:
ISDN-H.323 [3]/Basic_call/Successful/Speech
Selection criteria:

Test purpose: Ensure that call establishment using en-bloc sending is performed correctly.
Ensure that the SETUP message on the H.323 [3] interface is sent including the
fastStart field and on receipt of an ALERTING message including the fastStart field, call
establishment continues.
Ensure that in the active call state (N10) the voice transfer on the media and B-channels
is performed correctly (e.g. testing QoS parameters).
The fastStart element indicates the CODEC value in a H.245 [9] OpenLogicalChannel
structure.
ISDN Parameter BC=speech, no HLC
values:
H.323 [3] Parameter
BC=speech, no HLC
values:
Comments:

ETSI

---------------------- Page: 15 ----------------------

SIST-TS ETSI/TS 102 169-1 V1.1.1:2005
 14 ETSI TS 102 169-1 V1.1.1 (2003-02)
IH___SP__03 ISDN ref. to: PBN ref. to:
Q.931 [5], § 5.1.5.1 H.225.0 [4] § 7.2.2.1, § 7.3.10, § 7.3.2
Q.699 [23], § 2.1.1 TS 101 883 [1] § 5.1, § B.1.3.8, § B.1.3.3
H.246 annex C [10] § C.7.1
TSS reference: ISDN-H.323 [3]/Basic_call/Successful/Speech
Selection criteria:
Test purpose:
Ensure that call establishment using en-bloc sending is performed correctly.
Ensure that the SETUP message on the H.323 [3] interface is sent including the
fastStart field and on receipt of a CONNECT message including the fastStart field, call
establishment continues.
Ensure that in the active call state (N10) the voice transfer on the media and B-channels
is performed correctly (e.g. testing QoS parameters).
The fastStart element indicates the CODEC value in a H.245 [9] OpenLogicalChannel
structure.
ISDN Parameter BC=speech, no HLC
values:
H.323 [3] Parameter BC=speech, no HLC
values:
Comments:

IH___SP__04 ISDN ref. to: PBN ref. to:
Q.931 [5], § 5.1.5.1 H.225.0 [4] § 7.2.2.1, § 7.3.10, § 7.3.2
Q.699 [23], § 2.1.1 TS 101 883 [1] § 5.1, § B.1.3.8, § B.1.3.2
H.246 annex C [10] § C.7.1
TSS reference:
ISDN-H.323 [3]/Basic_call/Successful/Speech
Selection criteria:

Test purpose: Ensure that call establishment using en-bloc sending is performed correctly.
Ensure that the SETUP message on the H.323 [3] interface is sent including the
fastStart field and on receipt of a CALL PROCEEDING message including the Fast
Connect Refused field, call establishment continues. The H.245 [9] master slave
determination should be started.
Ensure that in the active call state (N10) the voice transfer on the media and B-channels
is performed correctly (e.g. testing QoS parameters).
The fastStart element indicates the CODEC value in a H.245 [9] OpenLogicalChannel
structure.
ISDN Parameter
BC=speech, no HLC
values:
H.323 [3] Parameter BC=speech, no HLC
values:
Comments: This test is not necessary in a TIPHON compliant SUT.

IH___SP__05 ISDN ref. to: PBN ref. to:
Q.931 [5], § 5.1.5.1 H.225.0 [4] § 7.2.2.1, § 7.3.10, § 7.3.2
Q.699 [23], § 2.1.1 TS 101 883 [1] Release 3 § 5.1, § B.1.3.8, § B.1.3.1
H.246 annex C [10] § C.7.1
TSS reference: ISDN-H.323 [3]/Basic_call/Successful/Speech
Selection criteria:
Test purpose: Ensure that call establishment using en-bloc sending is performed correctly.
Ensure that the SETUP message on the H.323 [3] interface is sent including the
fastStart field and on receipt of an ALERTING message including the Fast Connect
Refused field, call establishment continues. The H.245 [9] master slave determination
should be started.
Ensure that in the active call state (N10) the voice transfer on the media and B-channels
is performed correctly (e.g. testing QoS parameters).
The fastStart element indicates the CODEC value in a H.245 [9] OpenLogicalChannel
structure.
ISDN Parameter BC=speech, no HLC
values:
H.323 [3] Parameter BC=speech, no HLC
values:
Comments: This test is not necessary in a TIPHON compliant SUT.

ETSI

---------------------- Page: 16 ----------------------

SIST-TS ETSI/TS 102 169-1 V1.1.1:2005
 15 ETSI TS 102 169-1 V1.1.1 (2003-02)
IH___SP__06 ISDN ref. to: PBN ref. to:
Q.931 [5], § 5.1.5.1 H.225.0 [4]
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.