SIST EN ISO 11646:2000
(Main)Leather - Measurement of area (ISO 11646:1993)
Leather - Measurement of area (ISO 11646:1993)
The principle of the method specified is measuring the area of the conditioned leather with a mechanical pin-wheel machine. Is intended only for the measurement of dressed and other dry flexible leather.
Leder - Flächenmessung (ISO 11646:1993)
Diese Internationale Norm legt ein Verfahren zur Messung der Fläche von Lederstücken fest. Sie ist nur für die Messung von Fertigleder und anderem trockenem flexiblem Leder vorgesehen.
Cuir - Mesure de la surface (ISO 11646:1993)
La présente Norme internationale spécifie une méthode de détermination de l'aire de morceaux de cuir. Elle est destinée exclusivement au mesurage de cuirs passés en mégie et autres peaux souples et sèchesl).
Usnje - Merjenje ploščine (ISO 11646:1993)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Leder - Flächenmessung (ISO 11646:1993)Cuir - Mesure de la surface (ISO 11646:1993)Leather - Measurement of area (ISO 11646:1993)59.140.30Usnje in krznoLeather and fursICS:Ta slovenski standard je istoveten z:EN ISO 11646:1998SIST EN ISO 11646:2000en01-februar-2000SIST EN ISO 11646:2000SLOVENSKI
STANDARD
SIST EN ISO 11646:2000
SIST EN ISO 11646:2000
SIST EN ISO 11646:2000
INTERNATIONAL STANDARD ISO 11646 IULTCSAUP 32 First edition 1993-12-15 Leather - Measurement of area Cuir - Mesure de Ia surface Reference number ISO 11646:1993(E) lULTCS/IUP 32, 1993 Edition SIST EN ISO 11646:2000
ISO 11646:1993(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 11646 was prepared by the Physical Tests Commission of the International Union of Leather Technologists and Chemists Societies (IUP Commission, IULTCS). lt is based on IUP 32 published in J. Sec. Leather Tech. Chem., 73, pp. 23-24 (1989) and de- clared an official method of the IULTCS in October 1989. 0 ISO 1993 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronie or mechanical, including photocopying and microfilm, without Permission in writing from the publisher. International Organization for Standardization Case Postale 56 l CH-1 211 Geneve 20 l Switzerland Printed in Switzerland ii SIST EN ISO 11646:2000
INTERNATIONAL STANDARD 0 ISO ISO 11646:1993(E) Leather - Measurement of area 1 Scope This International Standard specifies a method of measuring the area of pieces of leather. lt is intended only for the measurement of dressed and other dry flexible leathers? 2 Normative reference The following Standard contains provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publi- cation, the edition indicated was valid. All Standards are subject to revision, and Parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most re- cent edition of the Standard indicated below. Mem- bers of IEC and ISO maintain registers of currently valid International Standards. ISO 2419: 1972, Leather - Conditioning of test pieces for physical tests. 3 Principle The area of the conditioned leather is measured with a mechanical pin-wheel machine. 4 Apparatus 4.1 Mechanical pin-wheel area-measurement machine The machine used should preferably have a feed-roller Speed of 20 m/min & 2 m/min. The distance between the centres of the pins on two adjacent pin-wheels should preferably be 25,4 mm &- 2,5 mm, measured parallel to the axis of the pin-wheel roller-. Pin-wheel machines which do not conform to these recommen- dations may also be used, but the actual design val- ues shall be stated in the test report. 4.2 Circular calibration templet The templet shall be made of flexible reinforced ma- terial, for calibrating the pin-wheel machine immedi- ately before the machine is used. The area of the templet shall not be less than 5 % of the pin-wheel machine capacity, and the width of the templet shall not be greater than 50 % of the machine’s working width. The area of the templet shall, if possible, be within + 50 % of the anticipated area of the piece of leather - to be measured. If this is not possible, feed the same templet through the machine a number of times N without resetting the machine to zero until the total reading is within + 50 % of the anticipated test- - specimen area, and treat this total as a Single measurement. When not in use, the templet(s) shall be kept flat in the Standard atmosphere defined in ISO 2419. The area of the templet(s) shall be verified at least once a year by an independent body using measure- ment instruments traceable to a national Standard calibration procedure. The templet is acceptable if its measured area is within & 0,5 % of its nominal area. NOTE 1 Users of this International Standard are rec- ommended to keep a record book of the measurements obtained during the daily calibration procedure. It should be inspected at regular intervals to detect any consistent trends towards inaccurate readings, e.g. left side of the machine always reads low, right side tends to read high. This gives advance warning of faults, which tan be of use to the maintenance engineer when servicing the machine. 1) This International Standard is written in SI units, in accordance with ISO directives. The use of the Square foot, still common in the leather trade in some countries, is discouraged. If, for commercial reasons, the use of the Square foot may seem necessary, it is obtained by the conversion: 1 sq ft = 0,092 9 m*. SIST EN ISO 11646:2000
ISO 11646:1993(E) 0 ISO 4.3 Calibration procedure NOTE 2 Generally speaking, relative humidity is more important than atmospheric temperature in determ
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.