SIST EN ISO 11073-10427:2018
(Main)Health informatics - Personal health device communication - Part 10427: Device specialization - Power status monitor of personal health devices (ISO/IEEE 11073-10427:2018)
Health informatics - Personal health device communication - Part 10427: Device specialization - Power status monitor of personal health devices (ISO/IEEE 11073-10427:2018)
This standard establishes a normative defi nition of communication between devices containing a power source (agents) and managers (e.g., cell phones, personal computers, personal health appliances,
settop boxes) in a manner that enables plugandplay interoperability.
Using existing terminology, information profi les, application profile standards, and transport standards as defi ned in other ISO/IEEE 11073 standards, this standard defines a common core of communication functionality of personal health devices (PHDs) containing a battery, including: 1) current device power status (e.g., on mains or on battery); 2) power charge status (e.g., percent of full charge); and 3) estimated time remaining (e.g., minutes).
Medizinische Informatik - Kommunikation von Geräten für die persönliche Gesundheit - Teil 10427: Gerätespezifikation - Monitor für den Energiestatus von Geräten für die persönliche Gesundheit (ISO/IEEE 11073-10427:2018))
Informatique de santé - Communication entre dispositifs de santé personnels - Partie 10427: Spécialisation des dispositifs - Moniteur de l'état de puissance des dispositifs de santé personnels (ISO/IEEE 11073-10427:2018)
La présente norme établit une définition normative de la communication entre dispositifs dotés d'une source d'alimentation (agents) et gestionnaires (par exemple, téléphones cellulaires, ordinateurs personnels, appareils de santé personnels et boîtiers décodeurs) de manière à permettre une interopérabilité du type prêt à l'emploi. À l'aide de la terminologie existante, des profils d'information, des normes de profil d'application et des normes de transport tels que définis dans d'autres normes ISO/IEEE 11073, la présente norme définit un tronc commun de fonctionnalités de communication des dispositifs de santé personnels (PHD) contenant une batterie, dont : 1) l'état de puissance actuel du dispositif (par exemple, sur secteur ou sur batterie) ; 2) l'état de charge de puissance (par exemple, pourcentage ou pleine charge) ; et 3) le temps restant estimé (par exemple, nombre de minutes).
Zdravstvena informatika - Komunikacija osebnih medicinskih naprav - 10427. del: Specialne naprave - Nadzor stanja napajanja za osebne medicinske naprave (ISO/IEEE 11073-10427:2018)
Ta standard določa normativno opredelitev komunikacije med napravami, ki vsebujejo vir napajanja (agenti), in upravitelji (npr. mobilnimi telefoni, osebnimi računalniki, osebnimi medicinskimi napravami,
digitalnimi sprejemniki) na način, ki omogoča interoperabilnost Plug and Play (PnP, »vstavi in poženi«).
Ta standard z uporabo obstoječe terminologije, informacijskih profilov, standardov za profile aplikacij in standardov za prevoz, kot so opredeljeni v drugih standardih ISO/IEEE 11073, določa skupno jedro komunikacijske funkcionalnosti za osebne medicinske naprave z baterijo, kar vključuje: 1) stanje napajanja tokovne naprave (npr. priključeno v omrežje ali na baterijo); 2) stanje polnjenja ob napajanju (npr. odstotek celotnega polnjenja); in 3) ocenjeni preostali čas (npr. minute).
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 11073-10427:2018
01-september-2018
Zdravstvena informatika - Komunikacija osebnih medicinskih naprav - 10427. del:
Specialne naprave - Nadzor stanja napajanja za osebne medicinske naprave
(ISO/IEEE 11073-10427:2018)
Health informatics - Personal health device communication - Part 10427: Device
specialization - Power status monitor of personal health devices (ISO/IEEE 11073-
10427:2018)
Medizinische Informatik - Kommunikation von Geräten für die persönliche Gesundheit -
Teil 10427: Gerätespezifikation - Monitor für den Energiestatus von Geräten für die
persönliche Gesundheit (ISO/IEEE 11073-10427:2018))
Informatique de santé - Communication entre dispositifs de santé personnels - Partie
10427: Spécialisation des dispositifs - Moniteur de l'état de puissance des dispositifs de
santé personnels (ISO/IEEE 11073-10427:2018)
Ta slovenski standard je istoveten z: EN ISO 11073-10427:2018
ICS:
35.240.80 Uporabniške rešitve IT v IT applications in health care
zdravstveni tehniki technology
SIST EN ISO 11073-10427:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11073-10427:2018
---------------------- Page: 2 ----------------------
SIST EN ISO 11073-10427:2018
EN ISO 11073-10427
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2018
EUROPÄISCHE NORM
ICS 35.240.80
English Version
Health informatics - Personal health device
communication - Part 10427: Device specialization -
Power status monitor of personal health devices(ISO/IEEE
11073-10427:2018)
Informatique de santé - Communication entre Medizinische Informatik - Kommunikation von Geräten
dispositifs de santé personnels - Partie 10427: für die persönliche Gesundheit - Teil 10427:
Spécialisation des dispositifs - Moniteur de l'état de Gerätespezifikation - Monitor für den Energiestatus
puissance des dispositifs de santé personnels von persönlichen gesundheitsbezogenen Geräten
(ISO/IEEE 11073-10427:2018) (ISO/IEEE 11073-10427:2018)
This European Standard was approved by CEN on 13 March 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11073-10427:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11073-10427:2018
EN ISO 11073-10427:2018 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 11073-10427:2018
EN ISO 11073-10427:2018 (E)
European foreword
This document (EN ISO 11073-10427:2018) has been prepared by Technical Committee ISO/TC 215
"Health informatics" in collaboration with Technical Committee CEN/TC 251 “Health informatics” the
secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2018, and conflicting national standards
shall be withdrawn at the latest by September 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 11073-10427:2018 has been approved by CEN as EN ISO 11073-10427:2018 without
any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 11073-10427:2018
---------------------- Page: 6 ----------------------
SIST EN ISO 11073-10427:2018
INTERNATIONAL
ISO/IEEE
STANDARD
11073-1042711073-10427
First edition
2018-01
Health informatics — Personal health
device communication —
Part 10427:
Device specialization — Power status
monitor of personal health devices
Informatique de santé — Communication entre dispositifs de santé
personnels —
Partie 10427: Spécialisation des dispositifs — Moniteur de l’état de
puissance des dispositifs de santé personnels
Reference number
ISO/IEEE 11073-10427:2018(E)
© IEEE 201 7
---------------------- Page: 7 ----------------------
SIST EN ISO 11073-10427:2018
ISO/IEEE 11073-10427:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© IEEE 2017
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or
by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written
permission. Permission can be requested from either ISO or IEEE at the address below or ISO’s member body in the country of
the requester.
ISO copyright office Institute of Electrical and Electronics Engineers, Inc
Ch. de Blandonnet 8 • CP 401 3 Park Avenue, New York
CH-1214 Vernier, Geneva, Switzerland NY 10016-5997, USA
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org stds.ipr@ieee.org
www.iso.org www.ieee.org
ii © IEEE 2017 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 11073-10427:2018
ISO/IEEE 11073-10427:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non‐governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE‐SA) Standards Board. The IEEE develops its standards
through a consensus development process, approved by the American National Standards Institute, which
brings together volunteers representing varied viewpoints and interests to achieve the final product.
Volunteers are not necessarily members of the Institute and serve without compensation. While the IEEE
administers the process and establishes rules to promote fairness in the consensus development process, the
IEEE does not independently evaluate, test, or verify the accuracy of any of the information or the soundness
of any judgments contained in its standards.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is called to the possibility that implementation of this standard may require the use of subject
matter covered by patent rights. By publication of this standard, no position is taken with respect to the
existence or validity of any patent rights in connection therewith. ISO/IEEE is not responsible for identifying
essential patents or patent claims for which a license may be required, for conducting inquiries into the legal
validity or scope of patents or patent claims or determining whether any licensing terms or conditions
provided in connection with submission of a Letter of Assurance or a Patent Statement and Licensing
Declaration Form, if any, or in any licensing agreements are reasonable or non‐discriminatory. Users of this
standard are expressly advised that determination of the validity of any patent rights, and the risk of
infringement of such rights, is entirely their own responsibility. Further information may be obtained from
ISO or the IEEE Standards Association.
ISO/IEEE 11073‐10427 was prepared by the IEEE 11073 Standards Committee of the IEEE Engineering in
Medicine and Biology Society (as IEEE Std 11073‐10427‐2016). It was adopted by Technical Committee
ISO/TC 215, Health informatics, in parallel with its approval by the ISO member bodies, under the “fast‐track
procedure” defined in the Partner Standards Development Organization cooperation agreement between ISO
and IEEE. IEEE is responsible for the maintenance of this document with participation and input from ISO
member bodies.
© IEEE 2017 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 11073-10427:2018
---------------------- Page: 10 ----------------------
SIST EN ISO 11073-10427:2018
IEEE Std 11073-10427™-2016
Health informatics—Personal health device communication
Part 10427: Device specialization—
Power Status Monitor of
Personal Health Devices
Sponsor
IEEE 11073™ Standards Committee
of the
IEEE Engineering in Medicine and Biology Society
Approved 22 September 2016
IEEE-SA Standards Board
---------------------- Page: 11 ----------------------
SIST EN ISO 11073-10427:2018
ISO/IEEE 11073-10427:2018(E)
Abstract: Guidelines for establishing criteria for application, performance, interchangeability, tests,
life cycle costs, and safety requirements of traction power rectifi er transformers are established
in this standard. Set forth are the electrical, mechanical and thermal design, manufacturing, and
testing requirements for traction power rectifi er transformers for dc electrifi cation systems. Covered
in this standard are liquid-immersed and dry-type transformers, including those with cast coil and
epoxy resin encapsulated windings.
Keywords: basic lightning impulse insulation, BIL, commutating impedance, design optimization,
electrical requirements, factory tests, ferroresonance, heavy rail, hot spot, IEEE 1653.1™, light rail,
load cycle, overvoltage transient, partial discharge (PD) service conditions, tests, traction power
duty cycle, traction power rectifi er transformers, transit application
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2017 by The Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 3 February 2017. Printed in the United States of America.
IEEE is a registered trademark in the U.S. Patent & Trademark Offi ce, owned by The Institute of Electrical and Electronics Engineers,
Incorporated.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.
PDF: ISBN 978-1-5044-2268-0 STD21081
Print: ISBN 978-1-5044-2269-7 STDPD21081
IEEE prohibits discrimination, harassment, and bullying.
For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
2
Copyright © 2017 IEEE. All rights reserved.
---------------------- Page: 12 ----------------------
SIST EN ISO 11073-10427:2018
ISO/IEEE 11073-10427:2018(E)
Important Notices and Disclaimers Concerning IEEE Standards Documents
IEEE documents are made available for use subject to important notices and legal disclaimers. These notic-
es and disclaimers, or a reference to this page, appear in all standards and may be found under the heading
“Important Notices and Disclaimers Concerning IEEE Standards Documents.” They can also be obtained on
request from IEEE or viewed at http://standards.ieee.org/IPR/disclaimers.html.
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are
developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Asso-
ciation (“IEEE-SA”) Standards Board. IEEE (“the Institute”) develops its standards through a consensus de-
velopment process, approved by the American National Standards Institute (“ANSI”), which brings together
volunteers representing varied viewpoints and interests to achieve the final product. IEEE Standards are doc-
uments developed through scientific, academic, and industry-based technical working groups. Volunteers in
IEEE working groups are not necessarily members of the Institute and participate without compensation from
IEEE. While IEEE administers the process and establishes rules to promote fairness in the consensus develop-
ment process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information or
the soundness of any judgments contained in its standards.
IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure
against interference with or from other devices or networks. Implementers and users of IEEE Standards doc-
uments are responsible for determining and complying with all appropriate safety, security, environmental,
health, and interference protection practices and all applicable laws and regulations.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and
expressly disclaims all warranties (express, implied and statutory) not included in this or any other document
relating to the standard, including, but not limited to, the warranties of: merchantability; fitness for a particular
purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In
addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards
documents are supplied “AS IS” and “WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there
are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to
the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and
issued is subject to change brought about through developments in the state of the art and comments received
from users of the standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other
services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any
other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or
her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropri-
ate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCURE-
MENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CON-
TRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN
IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH
DAMAGE WAS FORESEEABLE.
3
Copyright © 2017 IEEE. All rights reserved.
---------------------- Page: 13 ----------------------
SIST EN ISO 11073-10427:2018
ISO/IEEE 11073-10427:2018(E)
Translations
The IEEE consensus development process involves the review of documents in English only. In the event that
an IEEE standard is translated, only the English version published by IEEE should be considered the approved
IEEE standard.
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations
Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall
not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or
educational courses, an individual presenting information on IEEE standards shall make it clear that his or her
views should be considered the personal views of that individual rather than the formal position of IEEE.
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of
membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertain-
ing to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed
change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus
of concerned interests, it is important that any responses to comments and questions also receive the concur-
rence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordi-
nating Committees are not able to provide an instant response to comments or questions except in those cases
where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation
requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the
relevant IEEE working group.
Comments on standards should be submitted to the following address:
Secretary, IEEE-SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854 USA
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the
provisions of any IEEE Standards document does not imply compliance to any applicable regulatory require-
ments. Implementers of the standard are responsible for observing or referring to the applicable regulatory
requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance
with applicable laws, and these documents may not be construed as doing so.
Copyrights
IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws.
They are made available by IEEE and are adopted for a wide variety of both public and private uses. These
include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and
the promotion of engineering practices and methods. By making these documents available for use and adop-
tion by public authorities and private users, IEEE does not waive any rights in copyright to the documents.
4
Copyright © 2017 IEEE. All rights reserved.
---------------------- Page: 14 ----------------------
SIST EN ISO 11073-10427:2018
ISO/IEEE 11073-10427:2018(E)
Photocopies
Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy
portions of any individual standard for company or organizational internal use or individual, non-commercial
use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Ser-
vice, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of
any individual standard for educational classroom use can also be obtained through the Copyright Clearance
Center.
Updating of IEEE Standards documents
Users of IEEE Standards documents should be aware that these documents may be superseded at any time by
the issuance of new editions or may be amended from time to time through the issuance of amendments, corri-
genda, or errata. An official IEEE document at any point in time consists of the current edition of the document
together with any amendments, corrigenda, or errata then in effect.
Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years
old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of
some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that
they have the latest edition of any IEEE standard.
In order to determine whether a given document is the current edition and whether it has been amended
through the issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at http://ieeexplore.ieee.org/
or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEE’s standards
development process, visit the IEEE-SA Website at http://standards.ieee.org.
Errata
Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http://
standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically.
Patents
Attention is called to the possibility that implementation of this standard may require use of subject matter
covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the
existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has
filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-
SA Website at http://standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate
whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or
under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrim-
ination to applicants desiring to obtain such licenses.
Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not re-
sponsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries
into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions
provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are
reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the valid-
ity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further
information may be obtained from the IEEE Standards Association.
5
Copyright © 2017 IEEE. All rights reserved.
---------------------- Page: 15 ----------------------
SIST EN ISO 11073-10427:2018
ISO/IEEE 11073-10427:2018(E)
Participants
At the time this standard was submitted to the IEEE-SA Standards Board for approval, the 11073 Personal
Health Device Working Group had the following membership:
Daidi Zhong, Co-Chair
Michael J. Kirwan, Co-Chair
Miriam L. Makhlouf, Vice Chair
Karsten Aalders Santiago Carot-Nemesio Christoph Fischer
Randy W. Carroll Morten Flintrup
Charles R. Abbruscato
Nabil Abujbara Simon Carter Joseph W. Forler
Maher Abuzaid Seungchul Chae Russell Foster
Eric Freudenthal
James Agnew Rahul Chauhan
Haidar Ahmad James Cheng Matthias Frohner
Manfred Aigner Peggy Chien Ken Fuchs
Jorge Alberola David Chiu Jing Gao
Murtaza Ali Chia-Chin Chong Xuemei Gao
Rolf Ambuehl Saeed A. Choudhary Marcus Garbe
David Aparisi Jinhan Chung John Garguilo
Paolo Ariano Malcolm Clarke Rick Geimer
Lawrence Arne John A. Cogan Igor Gejdos
Diego B. Arquillo John T. Collins Ferenc Gerbovics
Cory Condek Nicolae Goga
Serafi n Arroyo
Muhammad Asim Todd H. Cooper Julian Goldman
Merat Bagha David Cornejo Raul Gonzalez Gomez
Chris Gough
Doug Baird Douglas Coup
David Baker Nigel Cox Channa Gowda
Anindya Bakshi Hans Crommenacker Charles M. Gropper
Ananth Tomio Crosley Amit Gupta
Balasubramanian David Culp Jeff Guttmacher
Sunlee Bang Allen Curtis Rasmus Haahr
M. Jonathan Barkley Ndifor Cyril Fru Christian Habermann
Jesús Daniel Trigo Michael Hagerty
Gilberto Barrón
David Bean Eyal Dassau Jerry Hahn
John Bell David Davenport Robert Hall
Russell Davis Nathaniel Hamming
Rudy Belliardi
Kathryn M. Bennett Sushil K. Deka Rickey L. Hampton
Daniel Bernstein Ciro de la Vega Sten Hanke
Aki Harma
George A. Bertos Pedro de-las-
Chris Biernacki Heras-Quiros Jordan Hartmann
Ola Björsne Jim DelloStritto Kai Hassing
Thomas Blackadar Matthew d’Entremont Marc Daniel Haunschild
Marc Blanchet Lane Desborough Wolfgang Heck
Thomas Bluethner Kent Dicks Nathaniel Heintzman
Douglas P. Bogia Hyoungho Do Charles Henderson
Xiaolian Duan Jun-Ho Her
Xavier Boniface
Shannon Boucousis Brian Dubreuil Takashi Hibino
Julius Broma Sourav Dutta Timothy L. Hirou
Jakob Ehrensvard Allen Hobbs
Lyle G. Bullock Jr.
Bernard Burg Fredrik Einberg Alex Holland
Chris Burns Michihiro Enokida Arto Holopainen
Kris Holtzclaw
Anthony Butt Javier Escayola Calvo
Jeremy Byford-Rew Mark Estes Robert Hoy
Satya Calloji Leonardo Estevez Frank Hsu
Xiaoying Cao Roger Feeley Anne Huang
Carole C. Carey Hailing Feng Sen-Der Huang
Craig Carlson Bosco T. Fernandes Zhiqiang Huang
6
Copyright © 2017 IEEE. All rights reserved.
---------------------- Page: 16 ----------------------
SIST EN ISO 11073-10427:2018
ISO/IEEE 11073-10427:2018(E)
Ron Huby Don Ludolph Barry Reinhold
David Hughes Christian Luszick Brian Reinhold
Melvin I. Reynolds
Robert D. Hughes Bob MacWilliams
Jiyoung Huh Srikkanth John G. Rhoads
Hugh Hunter Madhurbootheswaran Jeffrey S. Robbins
Hitoshi Ikeda Miriam L. Makhlouf Moskowitz Robert
Yutaka Ikeda Romain Marmot Chris Roberts
Philip O. Isaacson Sandra Martinez Timothy Robertson
Atsushi Ito Miguel Martínez David Rosales
de Espronceda Cámara Bill Saltzstein
Michael Jaffe
Praduman Jain Peter Mayhew Benedikt Salzbrunn
Wei Jin Jim McCain Giovanna Sannino
László Meleg Jose A. Santos-Cadenas
Danny Jochelson
Phaneeth Junga Alexander Mense Stefan Sauermann
Akiyoshi Kabe Jinsei Miyazaki John Sawyer
Guillaume Schatz
Steve Kahle Erik Moll
Tomio Kamioka Darr Moore Alois Schloegl
Kei Kariya Carsten Mueglitz Paul S. Schluter
Andy Kaschl Piotr Murawski Lars Schmitt
Junzo Kashihara Soundharya Mark G. Schnell
Kohichi Kashiwagi Nagasubramanian Richard A. Schrenker
Ralph Kent Jae-Wook Nah Antonio Scorpiniti
Alex Neefus Kwang Seok Seo
Laurie M. Kermes
Ikuo Keshi Trong-Nghia Riccardo Serafi n
Junhyung Kim Nguyen-Dobinsky Sid Shaw
Michael E. Nidd Frank Shen
Minho Kim
Min-Joon Kim Tetsu Nishimura Bozhi Shi
Taekon Kim Jim Niswander Min Shih
Mazen Shihabi
Tetsuya Kimura Hiroaki Niwamoto
David Klonoff Thomas Norgall Redmond Shouldice
Alfred Kloos Anand Noubade Sternly K. Simon
Jeongmee Koh Yoshiteru Nozoe Marjorie Skubic
Jean-Marc Koller Abraham Ofek Robert Smith
John Koon Brett Olive Ivan Soh
Patty Krantz Begonya Otal Motoki Sone
Marco Paleari Emily Sopensky
Raymond Krasinski
Alexander Kraus Charles Palmer Rajagopalan Srinivasan
Ramesh Krishna Bud Panjwani Andreas Staubert
Carl Pantiskas Nicholas Steblay
Geoffrey Kruse
Falko Kuester Harry P. Pappas Beth Stephen
Rafael Lajara Hanna Park Lars Steubesand
John (Ivo) Stivoric
Pierre Landau Jong-Tae Park
Jaechul Lee Myungeun Park Raymond A. Strickland
JongMuk Lee Soojun Park Chandrasekaran
Kyong Ho Lee Phillip E. Pash Subramaniam
Rami Lee TongBi Pei Hermanni Suominen
Sungkee Lee Lucian Pestritu Lee Surprenant
Woojae Lee Soren Petersen Ravi Swami
James Petisce Ray Sweidan
Yonghee Lee
Joe Lenart Peter Piction Jin Tan
Kathryn A. Lesh Michael Pliskin Yi Tang
Jeff Price Haruyuyki Tatsumi
Qiong Li
Ying Li Harald Prinzhorn John W. Thomas
Patrick Lichter Harry Qiu Jonas Tirén
Alexandra Todiruta
Jisoon Lim Arif Rahman
Joon-Ho Lim Tanzilur Rahman Janet Traub
John Lin Steve Ray Gary Tschautscher
Wei-Jung Lo Phillip Raymond Masato Tsuchid
Charles Lowe Tim Reilly Ken Tubman
7
Copyright © 2017 IEEE. All rights reserved.
---------------------- Page: 17 ----------------------
SIST EN ISO 11073-10427:2018
ISO/IEEE 11073-10427:2018(E)
Yoshihiro Uchida Jerry P. Wang Ariton Xhafa
Akib Uddin Yao Wang Yaxi Yan
Sunil Unadkat Yi Wang Ricky Yang
Fabio Urbani Steve Warren Melanie S. Yeung
Philipp Urbauer Fujio Watanabe Done-Sik Yoo
Laura Vanzago Toru Watsuji Jianchao Zeng
Alpo Värri Mike Weng Jason Zhang
Dalimar Velez Kathleen Wible Zhiqiang Zhang
Rudi Voon Paul Williamson Thomas Zhao
Miha Zoubek
Isobel Walker Jan Wittenber
David Wang Jia-Rong Wu Szymon Zyskoter
Will Wykeham
The following members of the individual
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.