SIST EN 301 070-1:2000

Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 interactions with the Intelligent Network Application Part (INAP); Part 1: Protocol specification [ITU-T Recommendation Q.1600 (1997), modified]

The definition of the extensions to the NNI protocols (ISUP) to enable the support of the interactions between ISUP and INAP within the scope of IN CS-1; endorsement of ITU-T Q.1600.

Digitalno omrežje z integriranimi storitvami (ISDN) - Signalizacija št. 7 - Medsebojno vplivanje med ISDN-uporabniškim delom tretje različice in aplikacijskim delom inteligentnega omrežja - 1. del: Specifikacija protokola

General Information

• Status: Published
• Publication Date: 31-Dec-1999
• ICS: 33.080 - Integrated Services Digital Network (ISDN)
• Technical Committee: SPS - Signalling protocols and switching
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jan-2000
• Due Date: 01-Jan-2000
• Completion Date: 01-Jan-2000
• Ref Project: ETSI EN 301 070-1 V1.2.2 (1998-09) - Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 interactions with the Intelligent Network Application Part (INAP); Part 1: Protocol specification [ITU-T Recommendation Q.1600 (1997), modified]

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 interactions with the Intelligent Network Application Part (INAP); Part 1: Protocol specification [ITU-T Recommendation Q.1600 (1997), modified]33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:EN 301 070-1 V1.2.23SIST EN 301 070-1:en01-QRYHPEHU-3SIST EN 301 070-1:SLOVENSKI
STANDARD



SIST EN 301 070-1:2000



EN 301 070-1 V1.2.2 (1998-09)European Standard (Telecommunications series)Integrated Services Digital Network (ISDN);Signalling System No.7;ISDN User Part (ISUP) version 3 interactions with theIntelligent Network Application Part (INAP);Part 1: Protocol specification[ITU-T Recommendation Q.1600 (1997), modified]SIST EN 301 070-1:2000



ETSIEN 301 070-1 V1.2.2 (1998-09)2ReferenceDEN/SPS-01044-1 (9wo90ipc.PDF)KeywordsISDN, SS7, ISUP, IN, INAP, CS1ETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: [phone]
Fax: [phone]Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/[e-mail]://www.etsi.frhttp://www.etsi.orgCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1998.All rights reserved.SIST EN 301 070-1:2000



ETSIEN 301 070-1 V1.2.2 (1998-09)3Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respectof ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on theETSI Web server (http://www.etsi.org/ipr).Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guaranteecan be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telecommunications series) has been produced by ETSI Technical Committee SignallingProtocols and Switching (SPS).The present document is part 1 of a multi-part EN covering the interactions between ISDN User Part (ISUP) version 3and Intelligent Network Application Part (INAP) in the scope of IN Capability Set 1 (CS1), as identified below:Part 1:"Protocol specification [ITU-T Recommendation Q.1600 (1997), modified]";Part 2:"Protocol Implementation Conformance Statement (PICS) proforma specification";Part 3:"Test Suite Structure and Test Purposes (TSS&TP) specification";Part 4:"Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification".National transposition datesDate of adoption of this EN:18 September 1998Date of latest announcement of this EN (doa):31 December 1998Date of latest publication of new National Standardor endorsement of this EN (dop/e):30 June 1999Date of withdrawal of any conflicting National Standard (dow):30 June 1999Endorsement noticeThe elements of ITU-T Recommendation Q.1600 (1997) apply, with the following modifications.NOTE:New or modified text is indicated using sidebars. In addition, underlining and/or strike-out are used tohighlight detailed modifications where necessary.Modifications to ITU-T Recommendation Q.1600Insert the following clause (Scope) at the start of the document:SIST EN 301 070-1:2000



ETSIEN 301 070-1 V1.2.2 (1998-09)41
SopeThe present document specifies the interaction between the ISUP and INAP.The interaction between other signalling systems and INAP can be found by consulting the relevant interworkingrecommendation to the ISUP in combination with the ISUP/INAP interaction recommendation.The present document specifies procedures in order to provide interaction between ISUP and INAP, i.e. to support INservices in an ISDN environment. In addition new protocol elements for the ISUP are defined in order to satisfy INspecific requirements. Based on the protocol inherent compatibility mechanism a stepwise upgrade of the ISUPfunctionality is possible. However, the new function is only available for an IN call, if supported in any of the affectedexchanges.The present document only considers the case where the SSP is located at a transit level. As a consequence this couldlead to limitations for ISDN supplementary services.The present document does not specify enhancements to the DSS1 protocol, which may be needed due to additionalISUP functions or IN requirements, respectively.The main subjects of this interaction specification are the following:-
description of specific call control functions for IN calls;-
impacts on the ISUP basic call and the ISDN supplementary services for IN calls;-
enhancement of the ISUP protocol due to IN specific requirements.0.2referencesReplace the clause "0.2 references" with the following clause (References):2ReferencesThe following documents contain provisions which, through reference in this text, constitute provisions of the presentdocument.· References are either specific (identified by date of publication, edition number, version number, etc.) ornon-specific.· For a specific reference, subsequent revisions do not apply.· For a non-specific reference, subsequent revisions do apply.· A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the samenumber.[1]
ETR 318 (1996): "Intelligent Network (IN); IN Capability Set 1 (CS1); Distributed functionalplane".[2]
EN 300 356-1: "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN UserPart (ISUP) version 3 for the international interface; Part 1: Basic services[ITU-T Recommendations Q.761 to Q.764 (1997), modified]".[3]
EN 300 356-3: "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN UserPart (ISUP) version 3 for the international interface; Part 3: Calling Line IdentificationPresentation (CLIP) supplementary service [ITU-T Recommendation Q.731, clause 3 (1993),modified]".[4]
EN 300 356-4: "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN UserPart (ISUP) version 3 for the international interface; Part 4: Calling Line Identification Restriction(CLIR) supplementary service [ITU-T Recommendation Q.731, clause 4 (1993), modified]".SIST EN 301 070-1:2000



ETSIEN 301 070-1 V1.2.2 (1998-09)5[5]
EN 300 356-5: "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN UserPart (ISUP) version 3 for the international interface; Part 5: Connected Line IdentificationPresentation (COLP) supplementary service [ITU-T Recommendation Q.731, clause 5 (1993),modified]".[6]
EN 300 356-6: "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN UserPart (ISUP) version 3 for the international interface; Part 6: Connected Line IdentificationRestriction (COLR) supplementary service [ITU-T Recommendation Q.731, clause 6 (1993),modified]".[7]
EN 300 356-10: "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDNUser Part (ISUP) version 3 for the international interface; Part 10: Subaddressing (SUB)supplementary service [ITU-T Recommendation Q.731, clause 8 (1992), modified]".[8]
EN 300 356-11: "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDNUser Part (ISUP) version 3 for the international interface; Part 11: Malicious Call Identification(MCID) supplementary service [ITU-T Recommendation Q.731, clause 7 (1997), modified]".[9]
EN 300 356-14: "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDNUser Part (ISUP) version 3 for the international interface; Part 14: Explicit Call Transfer (ECT)supplementary service [ITU-T Recommendation Q.732, clause 7 (1996), modified]".[10]
EN 300 356-15: "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDNUser Part (ISUP) version 3 for the international interface; Part 15: Diversion supplementaryservices [ITU-T Recommendation Q.732, clauses 2 to 5 (1997), modified]".[11]
ETS 300 374-1 (1994): "Intelligent Network (IN); Intelligent Network Capability Set 1 (CS1);Core Intelligent Network Application Protocol (INAP); Part 1: Protocol specification".[12]
EN 300 403-1: "Integrated Services Digital Network (ISDN);Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control;Part 1: Protocol specification [ITU-T Recommendation Q.931 (1993), modified]".Throughout the text of ITU-T Recommendation Q.1600Replace references as shown below:Reference in ITU-TRecommendation Q.1600Modified referenceITU-T Recommendation Q.1214ITU-T Recommendation Q.1214 as modified by ETR 318 [1]ITU-T Recommendation Q.1218ETS 300 374-1 [11]ITU-T Recommendation Q.731ITU-T Recommendation Q.731 as modified by EN 300 356, parts 3, 4, 5, 6, 10 and 11[3 to 8]ITU-T Recommendation Q.732ITU-T Recommendation Q.732 as modified by EN 300 356, parts 14 and 15[9 and 10]ITU-T Recommendation Q.763ITU-T Recommendation Q.763 as modified by EN 300 356-1 [2]ITU-T Recommendation Q.764ITU-T Recommendation Q.764 as modified by EN 300 356-1 [2]ITU-T Recommendation Q.931ITU-T Recommendation Q.931 as modified by EN 300 403-1 [12]SIST EN 301 070-1:2000



ETSIEN 301 070-1 V1.2.2 (1998-09)6Table 2Amend the table as shown:OperationInfluence on ISUPcall handlingReferenceAnalyseInformationFor further study (Note)CancelStatusReportRequestFor further study (Note)HoldCallInNetworkFor further study (Note)RequestCurrentStatusReportFor further study (Note)RequestEveryStatusChangeReportFor further study (Note)RequestFirstStatusMatchReportFor further study (Note)SelectFacilityFor fur
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 interactions with the Intelligent Network Application Part (INAP); Part 1: Protocol specification [ITU-T Recommendation Q.1600 (1997), modified]33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:EN 301 070-1 Version 1.2.2SIST EN 301 070-1:2000en01-januar-2000SIST EN 301 070-1:2000SLOVENSKI
STANDARD



SIST EN 301 070-1:2000



EN 301 070-1 V1.2.2 (1998-09)European Standard (Telecommunications series)Integrated Services Digital Network (ISDN);Signalling System No.7;ISDN User Part (ISUP) version 3 interactions with theIntelligent Network Application Part (INAP);Part 1: Protocol specification[ITU-T Recommendation Q.1600 (1997), modified]SIST EN 301 070-1:2000



ETSIEN 301 070-1 V1.2.2 (1998-09)2ReferenceDEN/SPS-01044-1 (9wo90ipc.PDF)KeywordsISDN, SS7, ISUP, IN, INAP, CS1ETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: [phone]
Fax: [phone]Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/[e-mail]://www.etsi.frhttp://www.etsi.orgCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1998.All rights reserved.SIST EN 301 070-1:2000



ETSIEN 301 070-1 V1.2.2 (1998-09)3Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respectof ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on theETSI Web server (http://www.etsi.org/ipr).Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guaranteecan be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telecommunications series) has been produced by ETSI Technical Committee SignallingProtocols and Switching (SPS).The present document is part 1 of a multi-part EN covering the interactions between ISDN User Part (ISUP) version 3and Intelligent Network Application Part (INAP) in the scope of IN Capability Set 1 (CS1), as identified below:Part 1:"Protocol specification [ITU-T Recommendation Q.1600 (1997), modified]";Part 2:"Protocol Implementation Conformance Statement (PICS) proforma specification";Part 3:"Test Suite Structure and Test Purposes (TSS&TP) specification";Part 4:"Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification".National transposition datesDate of adoption of this EN:18 September 1998Date of latest announcement of this EN (doa):31 December 1998Date of latest publication of new National Standardor endorsement of this EN (dop/e):30 June 1999Date of withdrawal of any conflicting National Standard (dow):30 June 1999Endorsement noticeThe elements of ITU-T Recommendation Q.1600 (1997) apply, with the following modifications.NOTE:New or modified text is indicated using sidebars. In addition, underlining and/or strike-out are used tohighlight detailed modifications where necessary.Modifications to ITU-T Recommendation Q.1600Insert the following clause (Scope) at the start of the document:SIST EN 301 070-1:2000



ETSIEN 301 070-1 V1.2.2 (1998-09)41
SopeThe present document specifies the interaction between the ISUP and INAP.The interaction between other signalling systems and INAP can be found by consulting the relevant interworkingrecommendation to the ISUP in combination with the ISUP/INAP interaction recommendation.The present document specifies procedures in order to provide interaction between ISUP and INAP, i.e. to support INservices in an ISDN environment. In addition new protocol elements for the ISUP are defined in order to satisfy INspecific requirements. Based on the protocol inherent compatibility mechanism a stepwise upgrade of the ISUPfunctionality is possible. However, the new function is only available for an IN call, if supported in any of the affectedexchanges.The present document only considers the case where the SSP is located at a transit level. As a consequence this couldlead to limitations for ISDN supplementary services.The present document does not specify enhancements to the DSS1 protocol, which may be needed due to additionalISUP functions or IN requirements, respectively.The main subjects of this interaction specification are the following:-
description of specific call control functions for IN calls;-
impacts on the ISUP basic call and the ISDN supplementary services for IN calls;-
enhancement of the ISUP protocol due to IN specific requirements.0.2referencesReplace the clause "0.2 references" with the following clause (References):2ReferencesThe following documents contain provisions which, through reference in this text, constitute provisions of the presentdocument.· References are either specific (identified by date of publication, edition number, version number, etc.) ornon-specific.· For a specific reference, subsequent revisions do not apply.· For a non-specific reference, subsequent revisions do apply.· A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the samenumber.[1]
ETR 318 (1996): "Intelligent Network (IN); IN Capability Set 1 (CS1); Distributed functionalplane".[2]
EN 300 356-1: "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN UserPart (ISUP) version 3 for the international interface; Part 1: Basic services[ITU-T Recommendations Q.761 to Q.764 (1997), modified]".[3]
EN 300 356-3: "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN UserPart (ISUP) version 3 for the international interface; Part 3: Calling Line IdentificationPresentation (CLIP) supplementary service [ITU-T Recommendation Q.731, clause 3 (1993),modified]".[4]
EN 300 356-4: "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN UserPart (ISUP) version 3 for the international interface; Part 4: Calling Line Identification Restriction(CLIR) supplementary service [ITU-T Recommendation Q.731, clause 4 (1993), modified]".SIST EN 301 070-1:2000



ETSIEN 301 070-1 V1.2.2 (1998-09)5[5]
EN 300 356-5: "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN UserPart (ISUP) version 3 for the international interface; Part 5: Connected Line IdentificationPresentation (COLP) supplementary service [ITU-T Recommendation Q.731, clause 5 (1993),modified]".[6]
EN 300 356-6: "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN UserPart (ISUP) version 3 for the international interface; Part 6: Connected Line IdentificationRestriction (COLR) supplementary service [ITU-T Recommendation Q.731, clause 6 (1993),modified]".[7]
EN 300 356-10: "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDNUser Part (ISUP) version 3 for the international interface; Part 10: Subaddressing (SUB)supplementary service [ITU-T Recommendation Q.731, clause 8 (1992), modified]".[8]
EN 300 356-11: "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDNUser Part (ISUP) version 3 for the international interface; Part 11: Malicious Call Identification(MCID) supplementary service [ITU-T Recommendation Q.731, clause 7 (1997), modified]".[9]
EN 300 356-14: "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDNUser Part (ISUP) version 3 for the international interface; Part 14: Explicit Call Transfer (ECT)supplementary service [ITU-T Recommendation Q.732, clause 7 (1996), modified]".[10]
EN 300 356-15: "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDNUser Part (ISUP) version 3 for the international interface; Part 15: Diversion supplementaryservices [ITU-T Recommendation Q.732, clauses 2 to 5 (1997), modified]".[11]
ETS 300 374-1 (1994): "Intelligent Network (IN); Intelligent Network Capability Set 1 (CS1);Core Intelligent Network Application Protocol (INAP); Part 1: Protocol specification".[12]
EN 300 403-1: "Integrated Services Digital Network (ISDN);Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control;Part 1: Protocol specification [ITU-T Recommendation Q.931 (1993), modified]".Throughout the text of ITU-T Recommendation Q.1600Replace references as shown below:Reference in ITU-TRecommendation Q.1600Modified referenceITU-T Recommendation Q.1214ITU-T Recommendation Q.1214 as modified by ETR 318 [1]ITU-T Recommendation Q.1218ETS 300 374-1 [11]ITU-T Recommendation Q.731ITU-T Recommendation Q.731 as modified by EN 300 356, parts 3, 4, 5, 6, 10 and 11[3 to 8]ITU-T Recommendation Q.732ITU-T Recommendation Q.732 as modified by EN 300 356, parts 14 and 15[9 and 10]ITU-T Recommendation Q.763ITU-T Recommendation Q.763 as modified by EN 300 356-1 [2]ITU-T Recommendation Q.764ITU-T Recommendation Q.764 as modified by EN 300 356-1 [2]ITU-T Recommendation Q.931ITU-T Recommendation Q.931 as modified by EN 300 403-1 [12]SIST EN 301 070-1:2000



ETSIEN 301 070-1 V1.2.2 (1998-09)6Table 2Amend the table as shown:OperationInfluence on ISUPcall handlingReferenceAnalyseInformationFor further study (Note)CancelStatusReportRequestFor further study (Note)HoldCallInNetworkFor further study (Note)RequestCurrentStatusReportFor further study (Note)RequestEveryStatusChangeReportFor further study (Note)RequestFirstStatusMatchReportFor further study (Note)SelectFacility
...